• KSBB Journal
• /
• 제25권1호
• /
• pp.47-54
• /
• 2010

The mycelial dispersed growth of Cordyceps sinensis was optimized in submerged batch culture at initial pH of 5.0, 150 rpm, and $25^{\circ}C$. The morphological data showed much more dispersed growth of C. sinenesis at initial pH of 5.0. Also, projected area, main hyphal length and number of tips for the mycelial growth of initial pH 5.0 were higher than those of other initial pHs. The industrial medium for mycelial production of C. sinensis was determined to be molasses of 100 g and crushed brewery yeast of 10 g per liter as carbon and nitrogen sources, respectively. With these culture conditions, the maximum production of mycelia was approximately 30.0 g per liter by batch culture in 5-liter jar fermenter with no controlled pH. This result suggests that large-scale mycelia production of C. sinensis may be possible in submerged batch culture. The hot water extract of mycelia from C. sinensis was mainly composed of 83.0% carbohydrate, 11.8% protein, 1.9% lipid, and 2.4% ash and there were present glucose, mannose, galactose, and arabinose as molar ratio of 8.79 : 2.59 : 1.34 : 1.0 in the carbohydrate, respectively. In the experiment using spleen cell and macrophage, the extract showed potent mitogenic and immuno-stimulating activities and among various components, an important factor that contribute to the immunological activities was turned out to be carbohydrate moiety.

• Journal of Microbiology and Biotechnology
• /
• 제22권1호
• /
• pp.58-68
• /
• 2012

An investigation was conducted on the enhancement of production and purification of an oxidant and SDS-stable alkaline protease (BHAP) secreted by an alkalophilic Bacillus horikoshii, which was screened from the body fluid of a unique Korean polychaeta (Periserrula leucophryna) living in the tidal mud flats of Kwangwha Island in the Korean West Sea. A prominent effect on BHAP production was obtained by adding 2% maltose, 1% sodium citrate, 0.8% NaCl, and 0.6% sodium carbonate to the culturing medium. The optimal medium for BHAP production contained (g/l) SBM, 15; casein, 10; $K_2HPO_4$, 2; $KH_2PO_4$, 2; maltose, 20; sodium citrate, 10; $MgSO_4$, 0.06; NaCl, 8; and $Na_2CO_3$, 6. A protease yield of approximately 56,000 U/ml was achieved using the optimized medium, which is an increase of approximately 5.5-fold compared with the previous optimization (10,050 U/ml). The BHAP was homogenously purified 34-fold with an overall recovery of 34% and a specific activity of 223,090 U/mg protein using adsorption with Diaion HPA75, hydrophobic interaction chromatography (HIC) on Phenyl-Sepharose, and ion-exchange chromatography on a DEAE- and CM-Sepharose column. The purified BHAP was determined a homogeneous by SDS-PAGE, with an apparent molecular mass of 28 kDa, and it showed extreme stability towards organic solvents, SDS, and oxidizing agents. The $K_m$ and $k_{cat}$ values were 78.7 ${\mu}M$ and $217.4s^{-1}$ for N-succinyl-Ala-Ala-Pro-Phe-pNA at $37^{\circ}C$ and pH 9, respectively. The inhibition profile exhibited by PMSF suggested that the protease from B. horikoshii belongs to the family of serine proteases. The BHAP, which showed high stability against SDS and $H_2O_2$, has significance for industrial application, such as additives in detergent and feed industries.

• Animal Bioscience
• /
• 제36권11호
• /
• pp.1757-1768
• /
• 2023

Objective: The number of bovine mammary epithelial cells (BMECs) is closely associated with the quantity of milk production in dairy cows; however, the optimal levels and the combined effects of hormones and essential amino acids (EAAs) on cell proliferation are not completely understood. Thus, the purpose of this study was to determine the optimal combination of individual hormones and EAAs for cell proliferation and related signaling pathways in BMECs. Methods: Immortalized BMECs (MAC-T) were treated with six hormones (insulin, cortisol, progesterone, estrone, 17β-estradiol, and epidermal growth factor) and ten EAAs (arginine, histidine, leucine, isoleucine, threonine, tryptophan, lysine, methionine, phenylalanine, and valine) for 24 h. Results: Cells were cultured in a medium containing 10% fetal bovine serum (FBS) as FBS supplemented at a concentration of 10% to 50% showed a comparable increase in cell proliferation rate. The optimized combination of four hormones (insulin, cortisol, progesterone, and 17β-estradiol) and 20% of a mixture of ten EAAs led to the highest cell proliferation rate, which led to a significant increase in cell cycle progression at the S and G2/M phases, in the protein levels of proliferating cell nuclear antigen and cyclin B1, cell nucleus staining, and in cell numbers. Conclusion: The optimal combination of hormones and EAAs increased BMEC proliferation by enhancing cell cycle progression in the S and G/2M phases. Our findings indicate that optimizing hormone and amino acid levels has the potential to enhance milk production, both in cell culture settings by promoting increased cell numbers, and in dairy cows by regulating feed intake.

• Asian-Australasian Journal of Animal Sciences
• /
• 제29권10호
• /
• pp.1398-1406
• /
• 2016

In general, the seminiferous tubule basement membrane (STBM), comprising laminin, collagen IV, perlecan, and entactin, plays an important role in self-renewal and spermatogenesis of spermatogonial stem cells (SSCs) in the testis. However, among the diverse extracellular matrix (ECM) proteins constituting the STBM, the mechanism by which each regulates SSC fate has yet to be revealed. Accordingly, we investigated the effects of various ECM proteins on the maintenance of the undifferentiated state of SSCs in pigs. First, an extracellular signaling-free culture system was optimized, and alkaline phosphatase (AP) activity and transcriptional regulation of SSC-specific genes were analyzed in porcine SSCs (pSSCs) cultured for 1, 3, and 5 days on non-, laminin- and collagen IV-coated Petri dishes in the optimized culture system. The microenvironment consisting of glial cell-derived neurotrophic factor (GDNF)-supplemented mouse embryonic stem cell culture medium (mESCCM) (GDNF-mESCCM) demonstrated the highest efficiency in the maintenance of AP activity. Moreover, under the established extracellular signaling-free microenvironment, effective maintenance of AP activity and SSC-specific gene expression was detected in pSSCs experiencing laminin-derived signaling. From these results, we believe that laminin can serve as an extracellular niche factor required for the in vitro maintenance of undifferentiated pSSCs in the establishment of the pSSC culture system.

• Journal of Microbiology and Biotechnology
• /
• 제16권3호
• /
• pp.360-367
• /
• 2006

The endoinulinase gene (inu1) from Pseudomonas mucidolens was expressed on the cell surface of Saccharomyces cerevisiae by fusing with Aga2p linked to the membrane anchored protein, Aga1p. The inu1 gene of P. mucidolens was subcloned into the surface display vector, pCTcon (GAL1 promoter). The constructed plasmid, pCTENIU (8.5kb), was then introduced to S. cerevisiae EBY100 cells and the yeast transformants selected on synthetic defined media lacking uracil and inulin-containing media. The inu1 gene under the control of the GAL1 promoter was successfully expressed in the yeast transformants, and the surface display of endoinulinase confirmed by immunofluorescence microscopy, along with its enzymatic ability to form inulooligosaccharides (IOSs) from inulin. The total endoinulinase activity reached about 2.31 units/ml when the yeast transform ants were cultivated on a YPDG medium. To efficiently hydrolyze the inulin, various reaction conditions were examined, including the pH, temperature, and inulin source. The optimized conditions were then determined as follows: pH, 7.0; temperature, $50^{\circ}C$; inulin source, Jerusalem artichoke. Under the optimized condition and 46 units of endoinulinase per g of inulin, IOSs started to be produced after 10 min of enzymatic reaction. The highest yield, 71.2% of IOSs, was achieved after 30 h of reaction without any significant loss of the initial enzyme activity. As a result of the reaction with inulin, IOSs consisting of inulobiose (F2), inulotriose (F3), inulotetraose (F4), and inulopentaose (F5) were produced, and F4 was the major product.

• Journal of Microbiology and Biotechnology
• /
• 제20권11호
• /
• pp.1471-1480
• /
• 2010

An extremely thermostable xylanase gene, xynB, from the hyperthermophilic bacterium Thermotoga maritima MSB8 was successful expressed in Kluyveromyces lactis. The response surface methodology (RSM) was also applied to optimize the medium components for the production of XynB secreted by the recombinant K. lactis. The secretion level (102 mg/l) and enzyme activity (49 U/ml) of XynB in the optimized medium (yeast extract, lactose, and urea; YLU) were much higher than those (56 mg/l, 16 U/ml) in the original medium (yeast extract, lactose, and peptone; YLP). The secretory efficiency of mature XynB was also improved when using the YLU medium. When the mRNA levels of 13 characterized secretion-related genes in the K. lactis cultured in YLP and YLU were detected using a semiquantitative RT-PCR method, the unfolded protein response (UPR)-related genes, including ero1, hac1, and kar2, were found to be up-regulated in the K. lactis cultured in YLU. Therefore, the nutrient ingredients, especially the nitrogen source, were shown to have a significant influence on the XynB secretory efficiency of the host K. lactis.

• 한국유가공학회:학술대회논문집
• /
• 한국유가공기술과학회 2002년도 제54회 춘계심포지움 - 우유와 국민건강
• /
• pp.59-60
• /
• 2002

Edible films such as wax coatings, sugar and chocolate covers, and sausage casings, have been used in food applications for years$^{(1)}$ However, interest in edible films and biodegradable polymers has been renewed due to concerns about the environment, a need to reduce the quantity of disposable packaging, and demand by the consumer for higher quality food products. Edible films can function as secondary packaging materials to enhance food quality and reduce the amount of traditional packaging needed. For example, edible films can serve to enhance food quality by acting as moisture and gas barriers, thus, providing protection to a food product after the primary packaging is opened. Edible films are not meant to replace synthetic packaging materials; instead, they provide the potential as food packagings where traditional synthetic or biodegradable plastics cannot function. For instance, edible films can be used as convenient soluble pouches containing single-servings for products such as instant noodles and soup/seasoning combination. In the food industry, they can be used as ingredient delivery systems for delivering pre-measured ingredients during processing. Edible films also can provide the food processors with a variety of new opportunities for product development and processing. Depends on materials of edible films, they also can be sources of nutritional supplements. Especially, whey proteins have excellent amino acid balance while some edible films resources lack adequate amount of certain amino acids, for example, soy protein is low in methionine and wheat flour is low in lysine$^{(2)}$. Whey proteins have a surplus of the essential amino acid lysine, threonine, methionine and isoleucine. Thus, the idea of using whey protein-based films to individually pack cereal products, which often deficient in these amino acids, become very attractive$^{(3)}$. Whey is a by-product of cheese manufacturing and much of annual production is not utilized$^{(4)}$. Development of edible films from whey protein is one of the ways to recover whey from dairy industry waste. Whey proteins as raw materials of film production can be obtained at inexpensive cost. I hypothesize that it is possible to make whey protein-based edible films with improved moisture barrier properties without significantly altering other properties by producing whey protein/lipid emulsion films and these films will be suitable far food applications. The fellowing are the specific otjectives of this research: 1. Develop whey protein/lipid emulsion edible films and determine their microstructures, barrier (moisture and oxygen) and mechanical (tensile strength and elongation) properties. 2. Study the nature of interactions involved in the formation and stability of the films. 3. Investigate thermal properties, heat sealability, and sealing properties of the films. 4. Demonstrate suitability of their application in foods as packaging materials. Methodologies were developed to produce edible films from whey protein isolate (WPI) and concentrate (WPC), and film-forming procedure was optimized. Lipids, butter fat (BF) and candelilla wax (CW), were added into film-forming solutions to produce whey protein/lipid emulsion edible films. Significant reduction in water vapor and oxygen permeabilities of the films could be achieved upon addition of BF and CW. Mechanical properties were also influenced by the lipid type. Microstructures of the films accounted for the differences in their barrier and mechanical properties. Studies with bond-dissociating agents indicated that disulfide and hydrogen bonds, cooperatively, were the primary forces involved in the formation and stability of whey protein/lipid emulsion films. Contribution of hydrophobic interactions was secondary. Thermal properties of the films were studied using differential scanning calorimetry, and the results were used to optimize heat-sealing conditions for the films. Electron spectroscopy for chemical analysis (ESCA) was used to study the nature of the interfacial interaction of sealed films. All films were heat sealable and showed good seal strengths while the plasticizer type influenced optimum heat-sealing temperatures of the films, 130$^{\circ}$C for sorbitol-plasticized WPI films and 110$^{\circ}$C for glycerol-plasticized WPI films. ESCA spectra showed that the main interactions responsible for the heat-sealed joint of whey protein-based edible films were hydrogen bonds and covalent bonds involving C-0-H and N-C components. Finally, solubility in water, moisture contents, moisture sorption isotherms and sensory attributes (using a trained sensory panel) of the films were determined. Solubility was influenced primarily by the plasticizer in the films, and the higher the plasticizer content, the greater was the solubility of the films in water. Moisture contents of the films showed a strong relationship with moisture sorption isotherm properties of the films. Lower moisture content of the films resulted in lower equilibrium moisture contents at all aw levels. Sensory evaluation of the films revealed that no distinctive odor existed in WPI films. All films tested showed slight sweetness and adhesiveness. Films with lipids were scored as being opaque while films without lipids were scored to be clear. Whey protein/lipid emulsion edible films may be suitable for packaging of powder mix and should be suitable for packaging of non-hygroscopic foods$^{(5,6,7,8,)}$.

• BMB Reports
• /
• 제34권6호
• /
• pp.502-508
• /
• 2001

A cDNA, encoding the human growth hormone (hGH), was synthesized based on the known 191 amino acid sequence. Its codon usage was optimized for a high level expression in Escherichia coli. Unique restriction sites were incorporated throughout the gene to facilitate mutagenesis in further studies. To minimize an initiation translation problem, a 624-bp cassette that contained a ribosome binding site and a start codon were fused to the hGH-coding sequence that was flanked between the EcoRI and HindIII sites. The whole fragment was synthesized by an overlapped extension of eight long synthetic oligonucleotides. The four-short duplexes of DNA, which were first formed by annealing and filling-in with a Klenow fragment, were assembled to form a complete hGH gene. The hGH was cloned and expressed successfully using a pET17b plasmid that contained the T7 promoter. Recombinant hGH yielded as much as 20% of the total cellular proteins. However, the majority of the protein was in the form of insoluble inclusion bodies. N-terminal amino acid sequencing also showed that the hGH produced in E. coli contained formyl-methionine. This study provides a useful model for synthesis of the gene of interest and production of recombinant proteins in E. coli.

• 생명과학회지
• /
• 제10권2호
• /
• pp.125-130
• /
• 2000

To overproduce endoxylanase from a recombinant Bacillus subtilis harboring the pJHKJ4 plasmid, the effects of carbon and nitrogen sources on the cell growth and expression level of endoxylanase were investigated in the flask cultures. Among the various carbon and nitrogen sources tested, glucose and maltose as carbon source and yeast extract as nitrogen source were found to be the most effective for the cell growth and the endoxylanase expression. When the concentration of glucose was increased from 0.5% to 5%, the highest activity of extracellular endoxylanse, 166 unit/$m\ell$, was observed at 2% glucose. In case of maltose, the endoxylanase was stably produced at the level of 180 unit/$m\ell$, regardless of the concentration of maltose. The higher the concentration of yeast extract, the greater cell growth and endoxylanase expression were obtained. However, the highest endoxylanase activity per unit cell mass was observed with 1% yeast extract. With the optimized medium (2% glucose, 1% yeast extract, etc), about 630 unit/$m\ell$ of endoxylanse was expressed through the batch fermentation in a fermentor, which expression level corresponded to about 0.7 g-endoxylanase protein /$\ell$. It was also found that the plasmid was stably maintained above 70% level, and more than 90% of endoxylanase activity was detected in the extracellular medium.

• KSBB Journal
• /
• 제21권4호
• /
• pp.260-266
• /
• 2006

본 연구에서는 P. pastoris를 이용한 유전자 재조합 HBsAg 생산에서 메탄올 유도시 여러 가지 첨가물들의 영향에 대해서 알아보았다. 회분식 배양에서 탄소원으로 글리세롤을 사용하다가 유가식 배양의 공급 탄소원으로 글리세롤이 아닌 당알콜인 sorbitol로 대체하였을 때 단백질 발현이 향상된 결과를 보였다. 또한 메탄올 유도시에 적당량의 아미노산 혼합물 첨가는 세포증식에는 영향이 없었지만 단백질 발현율은 크게 증가시켰다. 계면활성제인 Trition X-100의 첨가는 세포증식과 단백질 발현을 현저히 감소시켰지만, Pluronic F-68를 첨가했을 경우 세포증식의 저해영향 없이 단백질 발현율을 향상시켰다. 배지 부피의 0.01%(v/v)으로 oleic acid를 첨가하면 플라스크 배양에서는 단백질 발현에 긍정적인 효과를 보였으나, 5 L 발효조 배양에서는 메탄올 유도 시간이 지속되면서 첨가하지 않은 경우에 비해 발현율이 낮아지는 결과를 보였다. 마지막으로 trace salts는 첨가량에 따라 세포증식에는 영향이 없으며 단백질 발현에는 소량 trace salts 첨가로 단백질 발현에 긍정적인 효과를 보였다. 하지만 첨가량이 많아질수록 단백질 발현에는 부정적인 영향을 보임을 확인할 수 있었다.