• ETRI Journal
• /
• v.45 no.2
• /
• pp.193-202
• /
• 2023

We demonstrate the transmission of uncompressed 4K videos over the photonics-based terahertz (THz) wireless link using a directly modulated distributed feedback laser diode (DFB-LD). For optical heterodyne mixing and data modulation, a DFB-LD was employed and directly modulated with a 5.94-Gb/s non-return-to-zero signal, which is related to a 6G-serial digital interface standard to support ultra-high-definition video resolution. We derived the optimal frequency of the THz carrier by varying the wavelength difference between DFB-LD output and Tunable LD output in the THz signal transmitter to obtain the best transmission performances of the uncompressed 4K video signals. Furthermore, we exploited the negative laser-to-filter detuning for the adiabatic chirp management of the DFB-LD by the intentional discrepancy between the center wavelength of the optical band-pass filter and the output wavelength of the DFB-LD. With the help of the abovementioned methods, we successfully transmitted uncompressed 4K video signals over the 2.3-m wireless transmission distance without black frames induced by time synchronization error.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_2
• /
• pp.1073-1082
• /
• 2023

Thermal sensors, also called thermal infrared wavelength sensors, measure temperature based on the intensity of infrared signals that reach the sensor. The infrared signals recognized by the sensor include infrared wavelength(0.7~3.0㎛) and radiant infrared wavelength(3.0~100㎛). Infrared(IR) wavelengths are divided into five bands: near infrared(NIR), shortwave infrared(SWIR), midwave infrared(MWIR), longwave infrared(LWIR), and far infrared(FIR). Most thermal sensors use the LWIR to capture images. Thermal sensors measure the temperature of the target in a non-contact manner, and the data can be affected by the sensor's viewing angle between the target and the sensor, the amount of atmospheric water vapor (humidity), air temperature, and ground conditions. In this study, the characteristics of three thermal imaging sensor models that are widely used for observation using unmanned aerial vehicles were evaluated, and the optimal application field was determined.

• Journal of Biosystems Engineering
• /
• v.33 no.4
• /
• pp.269-275
• /
• 2008

This study was conducted to design an impedance sensor that can measure soil water content of soils. Partial least square regression (PLSR) was applied to soil impedance data preprocessed with a smoothing method. An optimal sub-spectrum size and wavelength range were determined by comparing the coefficient of determination ($R^2$) and root mean square error (RMSE) of the PLSR models obtained using soil impedance data. various PLS analysis. Based on the PLSR analysis, it would be concluded that the optimal spectrum measurement range was $32.0{\sim}50.0\;MHz$ with the optimal sub-spectrum size of about 18.5 MHz.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.5
• /
• pp.399-405
• /
• 2013

This study demonstrates the utilization of light microscopy and Fast Fourier Transform-Peak Finding (FPF) method for microfibril angle (MFA) measurement from unstained sections of red pine (Pinus densiflora). To obtain an image with optimal contrast and resolution for MFA measurement, effects of numerical aperture (NA) of condenser lens and color filters were investigated. About 60% of NA of the maximum condenser NA produced an image with optimal contrast, but a color filter with short wavelength range (DAPI) created images with improved resolution. Manual angle measurement and the FPF method were applied to the image with optimal contrast for MFA measurement. The experimental results from the FPF method were considered to be more repeatable and less subjective than those from the manual angle measurement.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.32 no.4
• /
• pp.51-60
• /
• 2007

In this study, we consider the minimum ADM problem which is the fundamental problem for the cost-effective design of SONET ADM embedded in WDM ring networks. To minimize the number of SONET ADMs, efficient algorithms for the routing and wavelength assignment are needed. We propose a mathematical model based on the graph theory for the problem and propose a branch-and-price approach to solve the suggested model effectively within reasonable time. By exploiting the mathematical structure of ring networks, we developed polynomial time algorithms for column generation subroutine at branch-and-bound tree. In a computer simulation study, the suggested approach can find the optimal solution for sufficient size networks and shows better performance than the greedy heuristic method.

• Journal of Korean Institute of Industrial Engineers
• /
• v.32 no.3
• /
• pp.219-225
• /
• 2006

We consider a routing and wavelength assignment (RWA) for the efficient operation of WDM networks. For a given physical network, a set of selected pairs of nodes, the number of required connections for each selected pair of nodes, and a set of available wavelengths, the RWA is to realize as many connections as possible without wavelength collision. We give an integer programming formulation and an algorithm based on column generation. Though the proposed algorithm does not guarantee optimal solutions, test results show that the algorithm gives probably good solutions.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.136-138
• /
• 2004

IP망을 활용한 VPN(Virtual Private Network)에서의 QoS 보장 및 광대역 서비스 제공에 대한 해결 방안으로 차세대 광 인터넷을 통한 OVPN(Optical VPN) 기술이 제시되고 있다. 차세대 광 인터넷의 구현이 IP/GMPLS(Generalized Multi-Protocol Label Switching) over DWDM(Dense Wavelength Division Multiplexing) 프로토콜 프레임워크로 표준화되고 있는 현실에 비추어 볼 때 IP/GMPLS over DWDM 백본망을 통한 OVPN은 차세대 가상사설망으로써 멀티미디어 서비스 제공을 위한 최적의 방안이다. 이러한 멀티미디어 서비스 제공을 위한 OVPN에서는 최적의 Optical-LSP(Label Switched Path)의 설립이 요구되고 있다. 따라서 본 논문에서는 차세대 OVPN의 모델 및 망의 blocking probability를 향상하기 위한 미래의 잠재적인 연결 요구에 대해 간섭을 최소화하면서 경로를 설정하는 MW-MIPR 라우팅 알고리즘을 제시하고 이를 라우팅 프로토콜인 OSPF-TE+(OSPF Extensions in Support of Generalized MPLS)에 맵핑하기 위한 방안을 제안한다.

• Journal of the Korean Geophysical Society
• /
• v.4 no.4
• /
• pp.297-311
• /
• 2001

The gain-clamped EDFA has been developed to eliminate the output power change of WDM surving channels to occur with added or dropped channels, which degrades the performance of WDM optical network. It maintains the constant gain of surviving channels when WDM channels are added or dropped in a network amplifying node. In this paper, the bi-directionally pumped gain-clamped EDFA is implemented to compensate the change of the input power by a lasing. The results show that the lasing of a short wavelength and backward propagation is the optimal condition to minimize the transient response of surviving channels in terms of the overshoot and gain saturation due to the inhomogeneous broadening effect.

• Journal of the Optical Society of Korea
• /
• v.9 no.2
• /
• pp.45-48
• /
• 2005

We investigate effects of the injected ASE (Amplified spontaneous emission) bandwidth on the performance of the wavelength-locked Fabry-Perot laser diodes (F-P LDs) under constant injection power density and constant injection power. For the constant injection power density, we can determine the minimum injection bandwidth by the required intensity noise or the bit-error rate (BER) performance. On the other hand, there exists the optimal ASE bandwidth for the constant injection power to minimize the intensity noise.

• Proceedings of the KIEE Conference
• /
• 1994.07b
• /
• pp.1336-1338
• /
• 1994

Cell fusion device is an artificial equipment which fuses electrically two types of cells fed from the respective micropump to the fusion chamber by electric pulses. In this case, the detective sensor of flowing cell, along with passage, is required to control the time of pulses applied to cell and the injection of cells which are fed from inlet to micropump. There are two methods of detection of flowing cell; optical, impedance method. The difference of output for optical sensor is about 426mV for 805nm wavelength. about 37mV for 665nm wavelength. In impedance method, sensor output is 132.33mV at middle point and 117.10mV at edge point in the channel. Experimental results show that the optimal frequency range of sensor output is Iron 50Hz to 400Hz.