• Journal of Fisheries and Marine Sciences Education
• /
• v.15 no.1
• /
• pp.57-66
• /
• 2003

The purpose of the present study was to investigate physicochemical changes in olive flounder and korean rockfish muscle subjected to the cold brine, and to find the optimal immersion condition. Effects of various immersion conditions in a sliced raw fish quality were investigated in the rigor index, breaking strength, ATP related compounds, and lactate accumulation in the muscle. The onset of rigor-mortis was accelerated by the increase of immersion time. Also, the time reaching full rigor was shortened remarkably too. However, the rigor index of samples immersed in the cold brine decreased more than that of samples killed instantly. Rigor index was the highest in samples killed instantly, followed by 2.5 min, 5min, 7.5 min, 10 min and 15 min in order. Breaking strength of all samples immersed in the cold brine decreased significantly after reaching the maximum values. The content of ATP related compounds in olive flounder, korean rockfish were $12.0{\mu}mole/g$ and $8.3{\mu}mole/g$, respectively. However, ATP decreased in the samples immersed in the cold brine. The content of ATP was lower, at the optimal condition and then it was increased. Also, lactates increased, at the optimal condition and then it decreased, in contrast with the ATP. The results suggested that the optimal immersion condition of olive flounder and korean rockfish was at -${12.5}^{\circ}C$ for 5min.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.4 s.35
• /
• pp.45-54
• /
• 1999

Non destructive test is applied to revise mechanical strength and assume material strength or defect of material, equipment and structure, instead of fracture test. Especially, ultrasonic test has the characteristics such as an excellent permeability high-sensitiveness to fine defect and an almost exact measurement for position, size and direction of inner defect which differ from other non destructive tests. In this study, the program is developed to evaluate optimal testing condition, to distinguish obstacle echo and defect position. This program on the basic of Ray-Tracing model shows generation and processing of ultrasonic pulse. The simulation is compared with testing in the 3 cases of an oblique angle transducer like $45^{\circ},\;60^{\circ}\;and\;70^{\circ}$. The test result for all conditions is well compared with simulation result when relative not is within $0.1{\sim}7.2%$. And the course of several echos is simply assumed through simulation.

• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.2
• /
• pp.165-170
• /
• 2000

In order to perform a successful material cutting process, the operators are to select the suitable machining tools and cutting conditions for the cutting environment. Up to now, this has been a complicated procedure done by the data in the tool manufacturers' paper catalog and the operator's experiencial knowledge, so called heuristics. This research is motivated by the fact that using computer techniques in processing vast amount of data and information, the operator can determine the tool and cutting condition easily. In the developed program, the selection of milling cutter, insert, and components are combined to provide optimal cutting speed, depth of cut, feed rate, rpm, and power. This program also provides the selection routine for end mill, drilling, turning, and grinding where the suitable tools are selected by workpiece, holder type, cut type, and insert shape.

• Transactions of Materials Processing
• /
• v.15 no.3 s.84
• /
• pp.247-254
• /
• 2006

Rather than traditional manufacturing processes, miniature manufacturing processes usually require sophisticated equipments and characteristics of the processes of high cost and of low productivity. Contrarily, miniature stamping process can be realized in a low cost high productivity with relatively inexpensive equipments. In the meso scale, mechanical properties, especially work hardening characteristics, are discovered to be statically scattered and size dependent by intensive experimental and numerical investigations, which make the stamping process hard to apply to the miniature manufacturing. In this study, dual purpose experimental device that can be used for both miniature scale tensile test and miniature scale stamping by simple change of attachment has been developed. For the tensile test, the elongation has been measured with a combined use of a CCD camera and a linear encoder in order to account for the possibility of slippage between specimen and the grip and to ensure the accuracy of the measurement, while load has been measured with a load cell. To satisfy the required material properties for stamping, optimal annealing condition has been found by examining the microstructure of annealed specimen.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.78-78
• /
• 2009

Glass sealing method is used glass bond as called frit in LCD, PDP process. but new sealing method is need to consider the endurance and economy. This paper present the new glass sealing method using high density gas torch in the furnace and process variable are defined by experiment. Taguchi Robust Experimental Design methods were applied for optimizing these four main processing parameters.

• Journal of the Korean Society of Industry Convergence
• /
• v.17 no.3
• /
• pp.184-193
• /
• 2014

Machine vision systems is applied for various industries such as optimize your spending, automate your production and maximize your efficiency. This research is effective for most optimal light condition of machine vision that technology was applied bald outside human visual acuity. Image processing converts a target image captured by a CCD camera into a digital signal and then performs various arithmetic operations on the signal to extract the characteristics of the target, such as points, lines, circles, area and length. The mathematical concepts of convolution and the kernel matrix are used to apply filters to signals, to perform functions such as extracting edges and reducing unwanted noise. This research analyze and compares matching ratio with reference image and search for optimal lighting condition in accuracy that user wants coming input image according to brightness change of lighting.

• Laser Solutions
• /
• v.4 no.2
• /
• pp.47-57
• /
• 2001

This study deals with the laser cutting of stencil for the PCB. The most important aim of this study is to determine optimal conditions which make good-qualify stencil in Nd:YAG laser cutting. We made an experiment according to various variables (power. type of mask. gas pressure, cutting speed, and pulse width) and analyzed the cutting characteristics (surface roughness, kerf width. dross) . Each variable has optimal value for good-qualify cut edge under fixed condition. And neural network after learning experimental data with a million time iteration could predict surface roughness of cut edge under arbitrary condition approximately.

• Journal of Power System Engineering
• /
• v.18 no.6
• /
• pp.91-98
• /
• 2014

The purpose of this research is to investigate optimum machining conditions to improve the quality of die using the CAD/CAM system(Power Shape/Power Mill) and 3D printing. Surface roughness is widely used as an index for processing degree of accuracy. The Power Shape was used to model the shape of product. And the model shape is confirmed by 3D printing system(BFB-3000). Also, tool path and NC-codes were generated using Power Mill. Finally, the product was cut using CNC machine(NBS-2025). The cutting time and surface roughness were measured by measuring instrument. And then this process was repeated by changing the conditions to find optimal machining conditions. The surface roughness behavior with regard to specific factors were analyzed. Through this study, the optimal machining condition can be obtained.

• Journal of Marine Bioscience and Biotechnology
• /
• v.14 no.1
• /
• pp.9-24
• /
• 2022

Low-molecular weight peptides derived from fish collagen exhibit several bioactivities, including antioxidant, antiwrinkle, antimicrobial, antidiabetic, and antihypertension effects. These peptides are also involved in triglyceride suppression and memory improvement. This study aimed to investigate the optimal processing condition for preparing low-molecular weight peptides from flounder skin, and the properties of the hydrolysate. The optimal processing conditions for peptic hydrolysis were as follows: a ratio of pepsin to dried skin powder of 2% (w/w), pH of 2.0, and a temperature of 50℃. Peptic hydrolysate contains several low-molecular weight peptides below 300 Da. Gly-Pro-Hyp(GPHyp) peptide, a process control index, was detected only in peptic hydrolysate on matrix-assisted laser desorption/ionization-time-of-flight(MALDI-TOF) spectrum. 2,2'-azinobis-(3-3-ethylbenzothiazolline-6- sulfonic acid(ABTS) radical scavenging activity of the peptic hydrolysate was comparable to that of 1 mM ascorbic acid, which was used as a positive control at pH 5.5, whereas collagenase inhibition was five times higher with the peptic hydrolysate than with 1 mM ascorbic acid at pH 7.5. However, the tyrosinase inhibition ability of the peptic hydrolysate was lower than that of arbutin, which was used as a positive control. The antibacterial effect of the peptic hydrolysate against Propionibacterium acne was not observed. These results suggest that the peptic hydrolysate derived from a flounder skin is a promising antiwrinkle agent that can be used in various food and cosmetic products to prevent wrinkles caused by ultraviolet radiations.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.1
• /
• pp.33-39
• /
• 2007

One of the most important processes is the face milling in processing task. It makes the smooth surface of processed goods. In processing stage, the formation of burr is inevitable. The formed burr decreases a detailed drawing and effects the safety of workers. So, it causes a deburring process for removing and a bottle-neck condition. Therefore, the study which can minimize the generation of burr is needed. In this paper, complex feature, such as line, arc, circle, spline is studied more reality than any other papers. And also, the algorithm which can predict the path of generated burr is established. Moreover, the finality goal is that the system which can produce tool-path minimized has to be developed.