• 한국환경보건학회지
• /
• 제35권5호
• /
• pp.402-410
• /
• 2009

This study was carried out to examine the optimal analytical method for determination of urinary toxic arsenic (inorganic arsenic and its metabolites) by HG-AAS (hydride generation-atomic absorption spectrometry). In the analysis of SRMs (standard reference materials), method E (addition of 0.4% L-cysteine to pre-reductant and use 0.04M HCl as carrier acid) showed the most accurate results compared with the reference values. In the analysis of 30 urinary samples, analytical results were significantly different depend on the component of pre-reductant and the concentration of carrier acid. When the concentration of carrier acid was higher, the analytical result was lower. The recovery rates of MMA (monomethylarsonic acid) and DMA (dimethylarsenic acid) were varied by the concentration of pre-treatment acid and carrier acid and hydride generation reagents. When the concentration of carrier acid was 1.62 M (5% HCl), the recovery rates of DMA was 1%. The recovery rates of MMA and DMA in method E (=V) were 102% and 100%, respectively. The results of this study suggest that the component and concentration of pre-reductant and carrier acid must be carefully adjusted in the analysis of urinary arsenic, and method E is recommendable as the most precise analytical method for determination of urinary toxic arsenic.

• 한국수정란이식학회지
• /
• 제33권1호
• /
• pp.1-11
• /
• 2018

Cellular cyclic adenosine-3' 5'-monophosphate (cAMP) modulator is known as meiotic inhibitor and can delays spontaneous maturation in IVM experiment. Among many cAMP modulators, the role of Pituitary adenylate cyclase activating polypeptide (PACAP) on IVM isn't known. The purpose of this study is to improve the maturation of oocytes derived from follicles ${\leq}3mm$ in diameter through PACAP as meiotic inhibitor during pre-in vitro maturation (pre-IVM). First, we checked PACAP and its receptors in cumulus cells and, to establish the optimal phase and concentration of PACAP for pre-IVM, we conducted chromatin configuration assessments. As a result, the rate of GV (Germinal Vesicle) according to duration of pre-IVM was significantly decreased 12 h and 18 h after IVM (87.1 and 84.1%, respectively) compared to 0 h (99.4%). When COC was cultured for 18 h, the GV rate in the $1{\mu}M$ of PACAP treatment group (82.1%) was significantly higher than any other PACAP treatment groups (60.5, 64.1, 74.4 and 69.9 %, respectively). So, we divided into four groups as follows; MF (the conventional IVM group, obtained from follicle from 3 to 6 mm in diameter), SF (the conventional IVM group, obtained from follicle ${\leq}3mm$ in diameter), Pre-SF(-)PACAP (IVM group including 18 h pre-IVM without $1{\mu}M$ of PACAP, obtained from follicle ${\leq}3mm$ in diameter) and Pre-SF(+)PACAP (IVM group including 18 h pre-IVM with $1{\mu}M$ of PACAP, obtained from follicle ${\leq}3mm$ in diameter). To examine the effect of PACAP during pre-IVM, we investigated analysis of nuclear maturation, intracellular glutathione (GSH) and reactive oxygen species (ROS) levels. In cumulus cells, PACAP receptors, ADCYAP1R1 and VIPR1 were detected but were not detected in oocytes. After IVM, the Pre-SF(+)PACAP had the highest Metaphase II rate (91.7%) among all groups (P<0.05). The GSH levels in the MF and Pre-SF(+)PACAP were significantly higher than in the other groups (P<0.05) and ROS levels was no significant difference among all groups. In conclusion, these results indicated that even though the oocytes were derived from SF, pre-IVM application of PACAP improved meiotic and cytoplasmic maturation by regulating intracellular oxidative stress.

• 한국환경과학회지
• /
• 제25권2호
• /
• pp.231-238
• /
• 2016

In this study, we have investigated to find optimal pre-treatment flocculation condition by analyzing the floc growth rate with mixing conditions and the membrane permeation flux for pre-treatment step of the membrane process. The higher mixing intensity showed a constant floc size index (FSI) values, and lower mixing intensity increased the degree of dispersion of the FSI values. Results of comparing the distribution characteristics of the FSI value and the permeation flux were more effective in increasing flux when the FSI values were 0.2 or higher. The degree of dispersion of FSI was relatively large in 40 rpm mixing condition compared to 120 rpm. In 40 rpm mixing condition, it decreased the permeation flux compared to 120 rpm because various sizes of flocs were distributed. Coagulation-UF membrane process enhanced 30%~40% of the flux rate compare to UF alone process, and the coagulation-MF process increased up to 5% of the flux rate compare to MF alone process. Pre-treatment, that is, coagulation process, has been found to be less effects on relatively larger pore size for MF membrane. For UF membrane, the flux was a little bit same when applying only the rapid mixing process or rapid mixing with slow mixing processes together. In case of MF membrane, the flux was improved when rapid mixing process applied with slow mixing process together.

• 한국축산식품학회지
• /
• 제43권3호
• /
• pp.428-440
• /
• 2023

Global meat consumption is increasing worldwide, however, supply remains lacking. Several alternative protein sources, such as cultured meat, plant-based protein production, and edible insects, have been proposed to overcome this shortage. Interestingly, edible insects are characterized by superior digestive and absorptive qualities that make them the ideal replacement for traditional protein production. This study aims to further the processing ability of insect protein by investigating the effects of various pre-treatment methods, such as blanching (HB), roasting (HR), and superheated steam (HS), on the nutritional properties and physicochemical characteristics of proteins extracted from Hermetia illucens larvae. The drying rate, pH value, color analysis, amino and fatty acid profile, as well as bulk density, shear force, and rehydration ratios of the above pre-treatment methods, were explored. HS was found to have the highest drying rate and pH value analysis showed that HB and HS samples have significantly higher values compared to the other modalities. Raw edible insects had the highest value in the sum of essential amino acid (EAA) and EAA index when compared to EAAs. HB and HS showed significantly lower bulk density results, and HS showed the highest shear force and the highest value in rehydration ratio, regardless of immersion time. Therefore, taking the above results together, it was found that blanching and superheated steam blanching pre-treatment were the most effective methods to improve the processing properties of H. illucens after hot-air drying.

• 한국의류학회지
• /
• 제30권8호
• /
• pp.1323-1332
• /
• 2006

Lyocell is a regenerated cellulose fiber manufactured by an environmentally-friendly process. Since the fiber has more crystalline region compared to rayon, lyocell shows higher wet-strength than rayon. Although fibril generation of lyocell is lower than that of rayon because of the reason, the fibril generated during the wet process deteriorates the smooth look and soft touch of the fabric. The efficient way to remove the fibril yet retain the strength property was investigated in this work. In order to scour and remove the fibril from the fabric, cellulase enzymes were introduced and the traditional scouring was carried to be compared. Weight loss, dye-ability, and strength of treated fabric were measured after the treatments. Scanning electron microscopy was used to observe the surface of the fiber. Among the cellulases used in this work, Denimax 992L showed the best results for removal of fibril with low weight loss and tensile strength loss. The optimal conditions for the enzymatic treatment could be chosen depending on a characteristic for final purpose of the lyocell product.

• 원예과학기술지
• /
• 제35권4호
• /
• pp.431-438
• /
• 2017

This study investigated the effect of pre-planting nitrogen (N) fertilization levels added to a soilless root medium on the growth of 'Dotaerang Dia' tomato seedlings. The N levels were varied for a total of 7 treatments: 0, 100, 250, 500, 750, 1,000, or $1,500mg{\cdot}L^{-1}$. The pH of the root media gradually rose in all treatments as the seedlings grew; however, the differences in the pH were not significant among the treatments. The electrical conductivity (EC) of the root media was significantly different among the treatments from sowing to week three, then drastically decreased after week four, which diminished the differences in the EC among the treatments. At week six, plant height, leaf length, leaf width, number of leaves, and fresh and dry weights of the shoot were highest for the treatment with $500mg{\cdot}L^{-1}N$. In contrast, the treatment with $1,500mg{\cdot}L^{-1}N$ had the lowest results for all growth measurements. The fresh weight was 67% heavier in the $500mg{\cdot}L^{-1}N$ treatment compared to the $1,500mg{\cdot}L^{-1}N$ treatment. The total N content in the tissues was lowest in the treatment with $0mg{\cdot}L^{-1}N$ and highest in the treatment with $1,000mg{\cdot}L^{-1}N$. The contents of calcium (Ca), magnesium (Mg), and metal micronutrients in the tissues were highest in the $250mg{\cdot}L^{-1}N$ treatment. A previous study demonstrated that adjusting the fertilization level to promote growth to over 90% of the maximum growth is a good strategy for lowering production costs and preventing damage due to excessive fertilizer absorption by crops. Our results indicated that the optimal pre-planting N fertilization level for tomato plug seedlings should be lower than $500mg{\cdot}L^{-1}$ and the optimum tissue N contents should be around 3.21% to 4.60%.

• 한국방사선학회논문지
• /
• 제8권7호
• /
• pp.461-466
• /
• 2014

체외 충격파 쇄석술시 쇄석기종에 따라 각각 장단점이 있으며, 전 처치로 인한 여러 가지 부작용이 보고되고 있다. 이에 전자기식 ESWL시 하부결석환자에서 적합한 충격파의 강도를 찾아보고, C-arm의 총 가동시간을 측정해 보았다. 본 연구는 2014년 1월부터 6월까지 경북지역 일개시의 C대학병원에서 전 처치를 시행하지 않고 ESWL을 받은 65명의 환자를 대상으로 하였다. 성비는 남자가 48명, 여자가 17명으로 남자가 더 많았으며, 연령은 50대가 가장 많았다. 하부요로결석의 발생은 왼쪽이 더 많았으며, 결석의 크기는 5mm 이하가 39명으로 가장 많았다. 적합한 충격강도는 1의 강도이며 통증을 호소하는 경우 C의 강도로 전환하여 충격을 가할 수 있다. 또한 C-arm의 총 가동시간은 $241.73{\pm}30.37$초로 나타났으며, 이것은 하부요로결석의 크기와 유의한 차이를 보였다(p<0.05). 따라서, ESWL시 전처치를 시행하지 않고 시술을 할 경우 요관 결석의 부위에 따라 적합한 충격강도와 충격빈도의 기준이 필요로 하며, C-arm 총 가동시간도 요관 결석의 발생부위에 따라 방사선으로 인한 피폭을 최소화하기 위한 총 가동시간에 대한 기준이 필요할 것으로 사료된다.

• Korean Chemical Engineering Research
• /
• 제47권6호
• /
• pp.762-767
• /
• 2009

해외 열대작물 씨앗에서 추출한 식물성 오일을 이용하여 바이오디젤을 생산하고 물성분석을 통해 차량연료로서의 사용가능성을 검토하는 연구를 수행하였다. 유리지방산 함량이 높은 열대작물 오일의 효율적인 바이오디젤 생산을 위해서는 유리지방산을 산촉매로 에스테르화한 후 전이에스테르화 반응하는 2단계 반응공정의 적용이 필요하였다. 전처리(에스테르화) 반응에 적합한 촉매를 선정하기 위해 3가지 산 촉매의 비교실험 수행 결과 황산이 최적 촉매임을 확인하였고, 반응표면분석법(response surface method, RSM)에 의해 도출한 최적 반응조건은 황산 촉매 0.982%와 메탄올 26.7%로 나타났다. 전이에스테르화 반응에 대한 최적화 실험을 반응표면분석법에 근거하여 수행하고, 결과로 KOH 촉매 1.24%, 메탄올 22.76%로 확인되었지만 본 연구팀의 선행 실험의 반응조건(KOH 0.8%)보다 과량의 촉매가 투입된 것으로 나타났다. 이에 대한 확인실험으로 메탄올과 촉매 투입량에 대한 추가 실험을 수행하였으며, 그 결과로서 최적 반응조건으로 KOH 촉매 0.8%와 메탄올:오일 몰비 6.2:1로 도출하였으며 반응생성물의 분석결과 지방산 메틸에스테르(fatty acid methyl ester, FAME) 100.8%, 산가 0.45 mgKOH/g, 수분 0.00%, 산화안정성 0.70 h, 총 글리세롤 함량 0.04%, Mono-glyceride 함량 0.04%, Di-glyceride 함량 0.01%, Tri-glyceride 함량 0.00%, 동점도($40^{\circ}C$에서) $4.041mm^2/s$, 저온필터막힘점 $1.0^{\circ}C$로 주요 바이오디젤 품질규격을 만족하는 것으로 나타났다.

• 한국식품영양과학회지
• /
• 제43권12호
• /
• pp.1881-1888
• /
• 2014

본 연구는 당근을 열처리법 중에서 열수침지, 과열증기 및 볶음 처리에 따른 이화학적 및 영양학적 특성을 분석한 논문으로 열처리가 당근에 미치는 영향을 비교하고자 하였다. 상품을 구매할 때 1차적인 구매요소인 색도 및 경도 측정과 추가적으로 pH와 조직 관찰 결과로 최적 조건 선정 후 영양학적 및 관능검사를 실시하였다. 열처리를 하지 않은 대조구에 비해 짧은 시간의 열처리에서는 더 진하고 선명한 색을 띠었으나, 장시간 동안 처리한 열처리 시료는 색의 침착을 보였다. 원물과의 색은 열처리 후 차이를 나타냈지만 열수 및 과열증기 2분 처리까지가 원물과 가장 유사한 색을 나타냈으며, 경도는 열처리 시간에 따라 감소 경향을 나타냈고 볶음 처리는 짧은 시간으로도 물성이 연화됐으며, 열수침지 및 과열증기 처리는 2분까지 원물에 가까운 경도를 유지했으나 처리 시간이 길어질수록 경도가 확실히 감소하였다. 비타민, 유리당 및 유기산의 경우 열수침지 처리에서 가장 큰 손실을 보였고, 과열증기, 볶음 처리 순으로 손실된 결과를 보였다. 특히 유기산에서 succinic acid는 열수침지 처리 시 큰 손실률을 보이며 감소된 결과를 나타냈다. Peroxidase activity 변화는 열수침지 및 과열증기 처리에서 볶음 처리보다 높은 불활성화를 보였다. 당근의 열처리 조건은 과열증기 처리법으로 2분 동안 처리하는 것이 다른 처리법에서 처리한 시간들에 비해 최적으로 나타났다. 식품마다 열처리 방법 별 각각의 최적 처리 시간을 가지고 있어, 높은 효율성이나 산업적으로 이용하려면 최적의 전처리 방법과 처리 시간을 산정하는 것이 중요하다.

• Membrane and Water Treatment
• /
• 제9권6호
• /
• pp.473-480
• /
• 2018

The effect of three iron-based adsorbents pre-depositing on ultrafiltration membrane for humic acid (HA) removal and membrane fouling was investigated. The result showed that pre-depositing adsorbents on membrane could not only reduce membrane fouling but also enhance HA removal. The flux was related to the adsorbent dosage and the optimal dosage for pre-deposition was $35.0g/m^2$. The dissolved organic carbon (DOC) removal of HA was 38.3%, 67.3% and 41.1% respectively when pre-deposited $35.0g/m^2$ $FeO_xH_y$, $MnFe_2O_4$ and $Fe_3O_4$ on membrane. Different adsorption effect of adsorbents on HA contributed to increasing of the flux at different level. Zeta potential of three adsorbents all decreased after adsorbed HA. The adsorption capacity of the three adsorbents was $FeO_xH_y$ > $MnFe_2O_4$ > $Fe_3O_4$. Atomic Force Microscopy (AFM) measurement showed the thickness of pre-deposition layers formed by different adsorbents was different. The scanning electron microscope (SEM) detection showed the morphology and compactness of pre-deposition layers formed by different adsorbents was different.