• Preventive Nutrition and Food Science
• /
• 제10권1호
• /
• pp.22-28
• /
• 2005

Physicochemical properties and sensory characteristics of kakdugi prepared with red pepper powder gamma-irradiated up to 7 kGy were determined during fermentation at 5℃. The overall fermentation patterns between kakdugies with irradiated and nonirradiated red pepper powder were similar. Kakdugi prepared with irradiated red pepper powder required one week longer time for optimal ripening compared to the kakdugi control. Irradiated red pepper powder did not affect the hardness and fracturability of kakdugi during fermentation. Kakdugi prepared with irradiated red pepper powder maintained a redder color than the kakdugi control. No significant differences were observed in taste, odor, texture, and overall acceptability (p<0.05) except for color. It can be concluded that irradiation of red pepper powder, up to 7 kGy, did not affect the quality of kakdugi with regard to physicochemical and sensory characteristics during fermentation. Moreover, irradiated red pepper powder was better for maintaining the red color and delaying optimum ripening time of kakdugi fermentation.

• 한국정밀공학회지
• /
• 제28권8호
• /
• pp.915-928
• /
• 2011

Titanium for dental implant application has the superior properties of biocompatibility, specific strength, and corrosion resistance. However, it is extremely difficult to find a suitable surface treatment method for sufficient osseointegration with biological tissue/bone cell and implant surface. Surface treatment technology using laser has been researched as the way to increase surface area of implant. In this study, to develop the surface treatment process with improved adhesion between implant and bone cell at the same time for superior biocompatibility, pulsed laser beam was overlapped continuously for scribed surface morphology and determination of friction coefficient. As the results, surface area and friction coefficient was increased over 2 times by the comparison with sand blasting, which is used for the conventional method. In this time, the optimal condition for laser beam power and beam irradiation speed was 13 watt and 50 mm/sec, respectively.

• 폴리머
• /
• 제24권1호
• /
• pp.1-7
• /
• 2000

방사선 전조사법을 이용하여 아크릴산을 ACF/PP 흔성 부직포에 그라프트 반응시켜 ACF/PP-g-AAc 공중합체를 합성하였다. 합성한 공황합체의 FT-IR 결과 1720, 3600~3100$cm^{-1}$ / 부근에서 C=O, -OH에 대한 피크가 확인되었고, 금속이온 흡착후에 공중합체의 표면은 좁쌀알 등과 같은 작은 조직이 관찰되었다. ACF/PP-g-AAc 공중합체의 금속이온에 대한 흡착능의 최적시간은 24시간이었으며 동일 조건하에서의 흡착능은 $Mn^{2+}$>Cu$^{2+}$>Co$^{2+}$>Ni$^{2+}$의 순서로 $Mn^{2+}$가 최대흡착능을 나타냄으로써 흔합용액에서 금속이온의 흡착에 대한 선택성은 이온반경의 크기에 비례하는 경향을 나타내었으며, 또한 ACF/PP-g-AAc 공중합체는 10회 이상 흡착능의 변화없이 흡탈착이 가능한 흡착제임을 알 수 있었다.

• 대한치과보철학회지
• /
• 제37권2호
• /
• pp.256-268
• /
• 1999

Submerged implants require secondary surgical uncovering of implants after healing period of 3-6 months. In surgical methods, there are surgical scalpel, tissue punch, electro-surgical, and laser-used uncovering, and so forth The objectives of this study are investigation and assessment of 1) thermal change in clinical application for uncovering of HA-coated implant and pure titanium implant irradiated by pulsed Nd-YAG, $CO_2$, and Er-YAG laser. 2) surface change of cover screws aaer irradiation using laser energy. The temperature of apex & side wall of implants were recorded at 10sec, 20sec, 30sec after 30sec irradiation to implant healing screw; 1) pulsed Nd-YAG laser; 2W, 20pps, contact mode 2) $CO_2$ laser; water-infused & non-water infused state, 2.5-3.5W, contibuous mode, noncontact mode 3) $CO_2$ laser ; non-water infused state, 3W, superpulse, noncontact. mode 4) Er-YAG laser; (1) non-water infused state, 10pps, 60mj, contact mode (2) water-infused state, 10pps, 60mj, 80mj, 101mj, contact mode. According to the results of this study, pulsed Nd-YAG laser is not indicated because of increased thermal change and pitting of metal surface of implant cover screw. By contrast, $CO_2$ laser & Er-YAG laser are presumed to indicate because of narrow range of thermal change & near abscence of thermal damage of metal surface. Dental laser is thought to be much helpful to surgical procedure when it is used as optimal power and time condition considering characteristics and indications of each laser. Further research is needed to verify that these techniques are safe and beneficial to implant success.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제23권2호
• /
• pp.15-22
• /
• 2018

Aqua regia extraction for the quantification of heavy metals and As in contaminated soils was investigated as one of preliminary steps for on-site monitoring using sensor technology. Soil samples were taken from closed railway depot, closed mines, and closed refinery and various extraction conditions including $30^{\circ}C/15min$, $30^{\circ}C/30min$, $30^{\circ}C/60min$, $30^{\circ}C/120min$, $80^{\circ}C/15min$, $80^{\circ}C/30min$, $80^{\circ}C/60min$, $80^{\circ}C/120min$ were tested. The optimal extraction condition was determined as $80^{\circ}C/60min$ because the extraction efficiencies of Zn were relatively low and did not reach the targeted level (80-100% of original concentrations) for $30^{\circ}C$ conditions. It was found that the fractionation of heavy metals and As using the sequential extraction method was useful to understand the degree of metal extraction. In order to enhance the extraction efficiency within short extraction time, ultrasound technology using a 20 kHz horn-type sonicator was additionally used for $30^{\circ}C/15min$. It was revealed that ultrasound could significantly enhance the extraction efficiency and pulsed irradiation showed higher efficiency than continuous irradiation due to the less formation of bubble clouds. However high temperature condition ($80^{\circ}C$) was required to achieve high extraction efficiency for Zn in spite of the use of ultrasound.

• Radiation Oncology Journal
• /
• 제22권3호
• /
• pp.225-233
• /
• 2004

목적: 유방의 방사선조사 시 결손조직을 보상하고 방사선 균질선량 분포를 얻기 위해 통상적으로 physical wedge를 사용하여 왔다. Physical wedge 사용 시 주변의 폐, 심장, 반대편 유방, 피부에 조사되는 방사선량의 증가에 따른 급성, 만성 부작용의 증가가 문제시 된다. 본 연구에서는 일반적인 Physical wedge와 virtual wedge를 비교하여 동측 유방, 반대편 유방, 폐, 심장, 주변연부조직에 미치는 선량분포의 개선점을 알아보고자 하였다. 재료 및 방법: Solid water phantom을 이용하여 Dmax와 10 cm 깊이에서 physical wedge와 virtual wedge 사용시 조사야 주변선량을 비교하였다 Humanoid Phantom (Anderson Rando Phantom)을 사용하여 Lt. breast의 tangential Irradiation 시 physical wedge와 virtual wedge 사용에 따른 동측 유방선량과 피부선량, 반대편 유방선량과 반대편 유방의 피부선량, 주변 연부조직선량, 동측 폐선량 및 심장에 조사되는 선량을 TLD를 이용하여 비교하였으며 Helax 5.0 RTP system을 이용한 compute planning으로 선량분포 및 관심부의 DVH를 비교하였다. 이때 virtual wedge와 physical wedge의 사용에 따른 총조사 시간을 측정하였다 또한 7명의 유방암 환자에서 virtual wedge, physical wedge 사용에 따른 동측 유방 피부선량, 반대편 유방 피부선량, 조사야에서 1.5 cm 떨어진 주변 선량을 측정하여 비교하였다. 결과: Virtual wedge는 15$^{\circ}$, 30$^{\circ}C$, 45$^{\circ}C$, 50$^{\circ}C$ 모두에서 physical wedge에 비해 주변선량이 감소하였으며 방사선조사 시간을 53$\~$55$\%$ 감소시켜 유용한 결과를 나타냈다. 15$^{\circ}C$, 30$^{\circ}C$ wedge를 사용한 Humanoid Phantom의 TLD 측정에서도 virtual wedge에서 반대편 유방선량은 1.35$\%$, 2.55$\%$ 감소하였고, 반대편 유방 피부선량은 0.87$\%$, 1.9$\%$ 감소하였다 또한 동측 폐선량은 2.7$\%$, 5.0$\%$, 심장선량은 0.95$\%$, 2.5$\%$ 감소하였다. 또한 조사야 경계부위의 선량은 1.8$\%$, 2.33$\%$ 감소하였으며 동측 유방의 피부선량은 2.4$\%$, 4.58$\%$ 증가하였다. Helax 5.0 RTP system을 이용한 DVH analysis에서 동측 유방내 선량균질정도는 physical wedge와 virtual wedge에서 차이 없이 유사하였다 결론: 유방암치료에서 virtual wedge는 통상 사용하는 physical wedge에 비하여 주변 연부조직선량, 반대편 유방선량, 동측 페선량 및 심장선량을 감소시켜 급, 만성 방사선 부작용의 위험을 감소시킬 수 있는 임상적으로 매우 유용한 방법이며 또한 방사선조사시간을 단축시킴으로써 선형가속기의 부하를 줄일 수 있다.

• Radiation Oncology Journal
• /
• 제10권1호
• /
• pp.95-100
• /
• 1992

LINAC 뇌정위적 방사선 수술은 multiple noncoplanar arc, 3 차원 선량 계산 및 많은 조사 변수들이 사용되기 때문에 간단한 경우에도 최적 선량분포를 얻기 위해서는 많은 시간이 요구된다. 본 논문에서는 실험적 방법과 분석적 방법을 통한 유용한 방법을 제시하기 위한 것으로서, 보다 자세한 방법 및 내용은 앞으로의 발표 논문에서 다루게 된다. 실험적 방법으로 2가지 방법에의하면, 첫번째 방법은 multiple isocenter를 이용하는 것이고, 두번째 방법은 beam's eye view와 field shaping을 이용한 conformal therapy이다. 분석적 방법은 최적 조사조건을 찾기 위하여 computer-aided design optimization 방법을 이용하는 것이다.

• Environmental Engineering Research
• /
• 제13권3호
• /
• pp.136-140
• /
• 2008

$TiO_2$ photocatalyst has been known to exhibit a notable disinfecting activity against a broad spectrum of microorganisms. A lot of commercial $TiO_2$ photocatalyst products have been developed for antimicrobial purposes. However, a standard method has not yet been proposed for use in testing antimicrobial activity. In this study, we developed a $TiO_2$ photocatalytic adhesion test method with film as the standard testing method for the evaluation of antimicrobial activity. This method was devised by modifying the previous antimicrobial products test method, which has been widely used, and considering the characteristics of $TiO_2$ photocatalytic reaction. The apparatus for testing the antimicrobial activity was composed of a Black Light Blue (BLB) lamp as UV-A light source, a Petri dish as the cover material, and a polypropylene film as the adhesion film. The standard $TiO_2$ photocatalyst sample, Degussa P25 $TiO_2$ - coated glass, could only be used once. The optimal initial concentration of the microorganism, proper light intensity, and light irradiation time were determined to be $10^6$ CFU/mL, 1.0 mW/$cm^2$, and 3 hr, respectively, for testing and evaluating antimicrobial activity on the $TiO_2$ surface.

• 동위원소회보
• /
• 제21권3호
• /
• pp.46-60
• /
• 2006

In recent years the progress of nuclear medicine advanced dramatically in imaging and targeted radionuclide therapy is able to open op exciting perspectives as standard diagnostic and therapeutic modalities, complementing conventional modalities. Positron emission tomography/computed tomography (PET/CT) technology with FDG has been developed clinically in less than 10 years as a routine standard in oncological imaging, including a number of other fluorinated radiopharmaceuticals being evaluated for their ability to complement FDG. However, the limitation of FDG-PET such as non-specific uptake and its short half-life is not compatible with the time necessary for optimal tumour targeting. Therefore, a development of innovative positron-emitting radionuclides with half-lives longer than 10 h is needed. For therapeutic applications, the injection of higher activities is required to reach efficient adsorbed doses in radioresistant solid tumours, while limiting the irradiation of vital organs. In this application, the longer half-life of radiolsotopes are more fit well for radionuclide therapy. To achieve this, researches have to be carried in a largor spectrum of radionuclides for diagnosis and therapy. In the context of rapidly growing nuclear medicine and strong demanding innovative radionuclides, a high-energy (100 MeV), high-intensity (-mA) accelerator with proton (PEFF at KAFRI). will be operating in 2011. The priorities of PEFP will include supporting the nuclear medicine research community by providing those radionuclides with current limited availability by means of a high-energy, high-intensity accelerator.

• 한국버섯학회지
• /
• 제18권4호
• /
• pp.393-397
• /
• 2020

Mycelium composites and leathers have versatile material properties based on their composition and manufacturing process. To prepare mycelium mat for the production of mushroom leather, several strains were mutated by gamma rays. Some mutant strains, including Lentinula edodes, Ganoderma lucidium, and Schizophyllum commune showed good hyphae growth rate and density on saw-dust media. Irradiation power (Gy), time, and height from the radiation source to the sample were examined. Based on the preliminary data obtained in this study, comprehensive research should be conducted to explore the optimal strains and culture conditions for mycelium-based leather production.