• 전자공학회논문지A
• /
• 제32A권11호
• /
• pp.86-93
• /
• 1995

An optical transmitter was designed and implemented using a commercially available LiNbO$_{3}$ Mach-Zehnder modulator and the power amplifiers. We have adopted a new method to stabilize the bias voltage of the modulator using the second order harmonic component of the dithering signal. This technique has been applied successfully to the 2.5 Gbit/s external modulator for more than 6 hours without bit error rate degradaton. We demonstrated a repeaterless transmission of a 2.5 Gbit/s signal over 150 km nondispersion-shifted fiber using the transmitter. The receiver sensitivity was -34.5 dBm at 10$_{-10}$ bit error rate. No appreciable BER degradation due to fiber dispersion were observed after transmission.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -1
• /
• pp.536-539
• /
• 2002

The use of concatenated codes in noncoherent synchronous optical fiber CDMA networks is proposed. The concatenated code sequences are generated using balanced Walsh code sequences and Walsh code sequences. The selection of balanced Walsh code sequences is presented and the design of fully programmable transmitter and receiver is reported. The analysis of the system BER performance shows that multiple-access interference is completely eliminated and the BER performance of the proposed system is better than that of the non-coherent synchronous optical fiber CDMA system using optical orthogonal codes with double hard-limiters.

• ETRI Journal
• /
• 제28권1호
• /
• pp.9-16
• /
• 2006

In this paper, we analyzed and measured the electrical crosstalk characteristics of a 1.25 Gbps triplexer module for Ethernet passive optical networks to realize fiber-tothe-home services. Electrical crosstalk characteristic of the 1.25 Gbps optical triplexer module on a resistive silicon substrate should be more serious than on a dielectric substrate. Consequently, using the finite element method, we analyze the electrical crosstalk phenomena and propose a silicon substrate structure with a dummy ground line that is the simplest low-crosstalk layout configuration in the 1.25 Gbps optical triplexer module. The triplexer module consists of a laser diode as a transmitter, a digital photodetector as a digital data receiver, and an analog photodetector as a cable television signal receiver. According to IEEE 802.3ah and ITU-T G.983.3, the digital receiver and analog receiver sensitivities have to meet -24 dBm at $BER=10^{-12}$ and -7.7 dBm at 44 dB SNR. The electrical crosstalk levels have to maintain less than -86 dB from DC to 3 GHz. From analysis and measurement results, the proposed silicon substrate structure that contains the dummy line with $100\;{\mu}m$ space from the signal lines and 4 mm separations among the devices satisfies the electrical crosstalk level compared to a simple structure. This proposed structure can be easily implemented with design convenience and greatly reduce the silicon substrate size by about 50 %.

• Journal of Communications and Networks
• /
• 제11권1호
• /
• pp.1-10
• /
• 2009

In this paper, we propose a chip-level detection and a spectral-slice scheme for the tunable-transmitter/fixed-receiver (TTFR)-based asynchronous spectral phase-encoded optical codedivision multiple-access (CDMA) system combined with timeencoding. The chip-level detection can enhance the tolerance of multiple access interference (MAI) because the channel collision does not occur as long as there is at least one weighted position without MAI. Moreover, the spectral-slice scheme can reduce the interference probability because the MAI with the different frequency has no adverse effects on the channel collision rate. As a result, these techniques mitigate channel collisions. We analyze the channel collision rate theoretically, and show that the proposed system can achieve a lower channel collision rate in comparison to both conventional systems with and without the time-encoding method.

• ETRI Journal
• /
• 제28권1호
• /
• pp.103-106
• /
• 2006

We have fabricated a planar lightwave circuit (PLC) hybrid-integrated optical sub-assembly of a triplexer using a thin film filter (TFF)-attached wavelength division multiplexer (WDM) and photodiode (PD) carriers. Two types of TFFs were attached to a diced side of a silica-terraced PLC platform, and the PD carriers with a $45^{\circ}$ mirror on which pin-PDs were bonded were assembled with the platform. A clear transmitter eye-pattern and minimum receiver sensitivity of -24.5 dBm were obtained under 1.25 Gb/s operation for digital applications, and a second-order inter-modulation distortion (IMD2) of -70 dBc was achieved for an analog receiver.

• 제어로봇시스템학회논문지
• /
• 제21권1호
• /
• pp.76-79
• /
• 2015

Visible light communication (VLC) is a short range optical communication technology using light emitting diodes. In this paper, we implement variable pulse position modulation (VPPM) defined in the IEEE 802.15.7 standard with a Cortex-M processor, which is a new modulation scheme for VLC providing a dimming control mechanism for flicker-free optical communication. The synchronization procedure between the transmitter and receiver is not defined clearly in the VPPM standard. In order to synchronize the transmitter and receiver easily, two overhead bits are used including one start bit and one stop bit modulated by on-off keying (OOK). Experimental results under various environmental conditions show that the proposed VPPM can support a seamless 100 Kbps data rate with 10 levels in the dimming control.

• 한국광학회지
• /
• 제12권6호
• /
• pp.503-506
• /
• 2001

펨토초 레이저로 여기 되는 transmitter chip에 DC 전압을 최소 573171서 최대 90Vell가지 변화시켜 테라헤르츠 전자기 펄스의 크기와 스펙트럼의 변화를 관찰하였다 전압이 증가괼수록 상대적 스펙트럼의 크기가 고주파 쪽으로 증가되었고 신호 대 잡음비 역시 250:1에서 10,000:1로 개선할 수 있었다 이를 이용한 테라헤르츠 시스템의 재정렬로 테라헤르츠 스펙트럼 을 최대 4 THz 가지 확장 할 수 있었다 또한 dipole 안테나를 이용한 테라헤르츠 전자기 펄스의 검출에서 입사되는 detection 레이저빔이 silicon on sapphire (SOS) receiver chip 뒤 표면에 반사되어 dipole 안테나로 입사될 때 두 개의 테라 헤르츠 펄스가 일정한 시간간격을 두고 동시에 발생됨을 알 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.229-231
• /
• 2000

Nowadays, the telecommunication service provider has witnessed an unprecedented growth in data traffic and the need for networking. optical fiber can provide some THz of huge bandwidth WDM technology has been an emerging issue for the efficient use of optical links. WDM uses a number of different wavelength that are assigned to each channel. The minimal number of optical transceivers and receivers should be used in a node to build an economic WDM transmission system without degrading system performance. Hence, the analysis of performance parameters such as throughput and delay is important to guarantee the WDM system performance. in this paper, the performance of a MAC protocol on a slotted WDM system that has a tunable transmitter(Txt), a tunable receiver(Rxt), and a fixed receiver(Rxf), respectively, on each node, was statistically analyzed The computer simulation validates the performance analysis.

• ETRI Journal
• /
• 제35권2호
• /
• pp.245-252
• /
• 2013

In this work, we study the physical layer solutions for 10-gigabit-capable passive optical networks (PONs), particularly for an optical link terminal (OLT) including a 10-Gbit/s electroabsorption modulated laser (EML) and a 2.5-Gbit/s burst mode receiver (BM-Rx) in a novel bidirectional optical subassembly (BOSA). As unique features, a bidirectional mini-flat package and a 9-pin TO package are developed for a 10-gigabit-capable PON OLT BOSA composed of a 1,577-nm EML and a 1,270-nm avalanche photodiode BM-Rx, including a single-chip burst mode integrated circuit that is integrated with a transimpedance and limiting amplifier. In the developed prototype, the 10-Gbit/s transmitter and 2.5-Gbit/s receiver characteristics are evaluated and compared with the physical media dependent (PMD) specifications in ITU-T G.987.2 for XG-PON1. By conducting the 10-Gbit/s downstream and 2.5-Gbit/s upstream transmission experiments, we verify that the developed 10-gigabitcapable PON PMD prototype can operate for extended network coverage of up to a 40-km fiber reach.

• 한국전자통신학회논문지
• /
• 제17권5호
• /
• pp.853-858
• /
• 2022

본 논문에서는 레이저 다이오드를 활용하여 수중 광 전력과 수중 광 무선통신의 동시전송을 연구하고 이에 대한 실험 결과를 보인다. 본 실험에서는 송신부에 전/광 변환을 위한 레이저 다이오드를 사용하고 수신부에는 광/전 변환을 위한 태양전지를 사용하였다. 수중 전송 실험을 위해서는 플라스틱 관에 물을 채워 구현하였으며, 수중 광 무선통신 및 수중 광 무선충전을 위해 레이저 송신단과 수신단 시스템을 최적화하였다. 본 실험에서는 100 mW 급 레이저를 사용하였으며, 레이저의 최대 전/광 변환효율을 18.5 % 였다. 수중 광 무선충전 및 수중 광 무선통신의 동시전송 실험결과, 수중에서 최대 5 m 전송시에 0.33 %의 DC-to-DC 전송효율을 보였으며, 수중 무선 광통신은 수중에서 1 m 전송시에 최대 50 kbps의 전송속도를 보였다.