한국에서 재배되고 있는 긴마, 단마 및 참마에서 분리한 전분의 특성을 조사한 결과는 다음과 같다. 전분의 평균 입자크기는 각각 단마 $23.5{\mu}m$, 긴마 $23.9{\mu}m$ 및 참마 $18.2{\mu}m$로 나타났고 표면 형태는 품종에 관계없이 불규칙한 난형을 나타내었으며 입자의 표면은 매끈하였다. 마전분의 아밀로오스 함량은 $29{\sim}33%$였고 물결합력은 $109.9{\sim}118.3%$ 였으며 온도변화에 따른 광투과도는 $70{\sim}75^{\circ}C$에서 상승 현상을 나타내는데 특히 참마는 $85^{\circ}C$부근에서 double stage 형태를 나타내었다. 팽윤력과 용해도는 단마가 다소 높은 수치를 나타내었고, 5% 마전분의 아밀로그램에 의하면 $80.3{\sim}84.3^{\circ}C$의 높은 호화 개시온도로 $95^{\circ}C$에서 가열시 계속적인 점도 상승 현상을 나타내었다. 마전분에 glucoamylase를 작용시킨 결과 반응 48시간후 최고 34%의 낮은 분해율을 보인반면 DMSO에 의해서는 반응 48시간 후 최고 100%의 용해율을 나타내었다. 마전분 및 전분에서 분리, 정제한 아밀로오스와 아밀로펙틴의 ${\beta}-amylolysis limit$는 마전분의 경우 $71.8{\sim}75.5%$를 나타내었고 아밀로오스에 있어서는 $90.2{\sim}92.1%$였으며 아밀로펙틴의 경우 $63.7{\sim}66.9%$를 나타내었다. 전분을 Sepharose CL-2B column으로 겔 크로마토그라피한 결과 모두 2개의 peak로 분리되었으며 pullulanase로 마밀로펙틴의 ${\alpha}-1,6-glucosidase$결합을 가수분해시킨 후 Sephadex G-75로 겔 크로마토그라피한 결과 peak II와 peak III의 정점에서의 중합도는 각각 15와 40부근이며 peak II에 대한 peak III의 중량비는 $2.15{\sim}2.42$ 분포를 나타내었다.
본 연구에서는 유연하고 투명한 특성을 지닌 유연 투명 정전용량형 압력 센서를 제안하여 기존의 X, Y 좌표 위치 인식이 가능할 뿐만 아니라 3차원 인식이 가능한 터치스크린을 제작하였다. 유연 투명 정전용량형 압력 센서는 상부 기판, 압력 감지층, 하부 기판의 3 중 구조로 구성되어 있다. 은나노와이어 전도성고분자 하이브리드 필름이 상부 및 하부 기판으로 사용되었다. 유연 투명 정전용량형 압력 센서의 터치 면적은 5인치이며, 전기적 신호를 인가하기 위한 11개의 driving line과 정전용량의 변화를 감지하기 위한 19개의 sensing line으로 구성되었다. 은나노와이어 전도성고분자 하이브리드 필름 및 유연 투명 정전용량형 압력 센서의 전기적, 광학적 특성을 평가하였다. 또한 기계적 유연성을 평가하기 위하여 굽힘 시험을 수행하였다. 제작된 은나노와이어 전도성고분자 하이브리드 필름은 평균 투과율 91.1%, 평균 탁도 1.35%로서 매우 우수한 광학 특성을 나타내었고, 평균 면저항은 $44.1{\Omega}/square$이었다. 굽힘 시험 결과 은나노와이어 전도성고분자 필름은 곡률 반경 3 mm까지 저항의 변화가 거의 없어 매우 우수한 유연성을 갖고 있음을 알 수 있었다. 또한 200,000회의 반복 굽힘 피로 시험 결과, 저항의 증가는 매우 미미하여, 유연 내구성이 매우 우수함을 알 수 있었다. 유연 투명 정전용량형 압력 센서의 평균 투과율은 84.1%, 탁도는 3.56%이었다. 또한, 직경 2 mm의 팁으로 눌렀을 경우, 누르는 압력에 따라 센서가 잘 작동함을 알 수 있었으며, 이를 통하여 멀티 터치 및 멀티 포스 터치가 가능함을 확인하였다. 본 연구에서 제작한 유연 투명 정전용량형 압력 센서는 유저인터페이스, 사용자 경험이 강조되고 있는 현재 상황에서 새로운 인터페이스의 터치스크린 패널에 대한 발전 가능성을 제시할 수 있을 것이라 판단된다.
Sol-gel dip coating법으로 soda lime glass 기판 위에 ATO(antimony-doped tin oxide) 투명전도막을 제조할 때, 기판 위에 형성된 $SiO_2$ barrier 층 및 $N_2$ gas annealing 에 따른 광투과율 및 전기적 특성에 대한 효과를 정량적으로 측정하고, XPS(X-ray photoelectron spectroscopy) 분석을 통해 고찰하였다. $SiO_2$ barrier층을 갖는 glass 기판 위에 코팅된400 nm 두께의 ATO 박막을 질소분위기에서 annealing한 결과, 광 투과율은 84%그리고 전기저항은 약 $5.0\times 10^{-3}\Omega \textrm{cm}$로 측정되었다 XPS 분석결과 이러한 우수한 전기전도성은 $SiO_2$ buffer층이 glass 기판으로부터 Na 이온의 확산을 막아 ATO막 내에 $Na_2SnO_3$ 및 SnO와 같은 2차상 불순물의 형성을 억제하여 막 내부의 Sb의 농도 및 $Sb^{5+}/Sb^{3+}$ 비를 증가시키고, $N_2$ annealing은 $Sb^{5+}$ 도 환원시키지만 $Sn^{4+}$를 환원시키는 효과가 크게 작용하였기 때문으로 사료된다.
In-line magnetron sputtering system을 사용하여 대면적($60{\times}60cm^2$) 소다라임 유리기판위에 투명전도성 ZnO(Al)와 ZnO(AlGa) 박막을 500 nm에서 1,450 nm까지 두께별로 증착하여 전기적, 광학적 특성을 연구하였다. XRD를 통해 c-축 방향성(002)을 가지고 성장된 것을 확인 하였다. Hall 특성 분석을 통해 이동도 및 캐리어 농도의 특성을 확인 하였으며, 그에 따른 ZnO(AlGa)의 비저항이 $9.03{\times}10^{-4}{\Omega}{\cdot}cm$에서 $7.83{\times}10^{-4}{\Omega}{\cdot}cm$으로 ZnO(Al) 보다 높게 나타났으며, 가시광선 영역에서 투과율은 87.6%에서 84.3%으로 나타났다. 따라서 ZnO(AlGa)는 전기적 특성이 우수하고 높은 투과율로 대면적용 투명전도성 재료로의 활용에 적합한 특성을 지닌 것을 확인 할 수 있었다.
General D-glass(Dielectric glass) fibers are adaptable to PCBs(Printed circuit boards) because they have a low dielectric constant of about 3.5~4.5. However, very few papers have appeared on the physical characteristics of D-glass fibers. D-glass fibers were fabricated via continuous spinning process using bulk D-glass. In order to fabricate the D-glass, raw materials were put into a Pt crucible, melted at $1650^{\circ}C$ for 2 hrs, and then annealed at $521{\pm}10^{\circ}C$ for 2 hrs. We obtained transparent clear glass. The transmittance and adaptable temperature for spinning of the bulk marble glass were characterized using a UV-visible spectrometer and a viscometer. Continuous spinning was carried out using direct melting spinning equipment as a function of the fiberizing temperature in the range of $1368^{\circ}C$ to $1460^{\circ}C$, while the winder speed was between 100 rpm and 200 rpm. We investigated the physical properties of the D-glass fibers. The average diameters of the glass fibers were measured by optical microscope and FE-SEM. The average diameters of the D-glass fibers were 21.36 um at 100 rpm and 34.06 um at 200 rpm. The mechanical properties of the fibers were confirmed using a UTM(Universal materials testing machine). The average tensile strengths of the D-glass fibers were 467.03 MPa at 100 rpm and 522.60 MPa at 200 rpm.
At Gosan ABC superstation in Jeju Island, we measured organic carbon (OC) and elemental carbon (EC) in $PM_{2.5}$ from October 2009 to June 2010 using a Sunset Laboratory Model-4 Semi-Continuous OC/EC Field Analyzer. It employs TOT (Thermal-Optical-Transmittance) method with NIOSH 5040 protocol and enables to continuously monitor OC and EC concentrations with 1-hour time resolution. The mean values of OC and EC for the entire period of measurements were $2.1{\pm}1.4{\mu}g/m^3$ and $0.7{\pm}0.6{\mu}g/m^3$, respectively. The OC/EC ratio was 3 and EC accounted $25{\pm}2.1%$ of total carbon (TC, TC=OC+EC). Although OC and EC showed similar trend in seasonal variation, the ratio of OC to EC was the highest in early summer when temperature was the highest and the air was affected by biomass burning in the southern part of China. In winter, the high OC and EC concentrations were likely influenced by increased coal combustion from residential heating. The high OC and EC concentrations were observed during events such as haze, dust, and the combination of the two. During the haze events, OC and EC were enhanced with increase in $PM_{10}$, $PM_{2.5}$, $SO_2$, and $NO_2$ with broad maxima. When dust occurred, both OC and EC started decreasing after reaching their maxima a couple of hours before $PM_{10}$ maximum. The peak separation of carbonaceous species and aerosol masses with time was more noticeable when haze event was followed by dust plume. These results confirm that OC and EC are key components of haze occurring in the study region.
아끼바레 및 밀양 23호 쌀 전분의 이화학적 성질, 전분 gel의 노화 및 음이온에 의한 호화양상을 조사하였다. 두 전분입자의 성상은 다각형이며 입자의 크기는 $3{\sim}6{\mu}m$ 정도였으며, 아끼바레가 밀양 23호 보다 다소 작았다. 두 전분의 X-ray 회절도는 A형으로 peak 형태와 강도에서 약간의 차이를 보였다. 아끼바레 및 밀양 23호 쌀 전분의 아밀로스함량은 각각 18.5 및 19.5%이었고 물 결합능력은 106 및 100%이었다. 팽화력은 $50^{\circ}C$까지는 큰 변화가 없었으나 이후에 급격히 증가하였고 밀양 23호 쌀 전분의 팽화력이 더 컸다. 전분 현탁액(0.1%)의 광투과도는 두 전분 모두 $60^{\circ}C$ 이후에서 급격히 증가하였으며 밀앙 23호 쌀 전분이 더 큰 광투과도를 보였다. 음이온에 의한 아밀로 그람 pattern은 NaCl과 NaF는 동일하였고 NaSCN과 NaI는 유사였다. 호화온도 및 최고점도시의 온도는 SCN-${SO_4}^=$의 순으로 증가하였고 SCN- 및 I-이온은 최고점도를 증가시켰으나 NaCl은 감소시켰다. ${SO_4}^=$ 이온을 첨가한 경우 점도는 계속 증가하였고 최고점도에 도달하지 않았다. 아끼바레 및 밀양 23호 전분 gel을 $21^{\circ}C$에서 저장한 경우 시간 상수가 각각 6.72 및 6.42일이었다.
율무와 염주 전분을 분리하여 입자의 형태와 몇가지 물리화학적인 특성을 검토하여 다음과 같은 결과를 얻었다. 1. 광학 현미경으로 본 입자의 외형은 6각형, 8각형, 구형이었고, 평균직경은 율무와 염주 모두 $12.0{\mu}$이었다. 2. X-선 회절에 의한 결정구조는 A-type이었고, amylose함량은 율무전분이 0%, 염주전분은 23%였다. 3. 요오드 친화성은 율무전분이 0.08%, 염주전분은 4.2%이었고, blue value는 각각 0.13과 0.43이었다. 4. 다율무전분의 amylopectin분자의 1 segment 당 D-glucose 평균 중합도는 23이었고, 율무 및 염주전분의 alkali number는 각각 2.4와 7.2였다. 5. 팽화력은 율무와 염주 전분에서 각각 280과 20이었고, 가열에 의한 팽윤 현상은 율무전분이 염주전분보다 2배 높았으나, 융해도는 1/2배로 낮았다. 6. 0.1% 전분농도의 광투과도는 율무와 염주 전분 모두 $60^{\circ}C$에서 증가하는 호화양상을 보였고 amylogram에 의한 호화개시온도는 율무전분이 $68.5^{\circ}C$, 염주전분이 $78^{\circ}C$이었고 최고점도는 920 B.U.와 310 B.U.였으며 율무부분은 set back이 아주 낮았다. 7. 고유점도는 율무와 염주전분에서 각각 1.49, 1.77이었고 점조도지수는 0.67과 0.56이었다. 8. 전분 gel의 노화양상은 율무전분에서는 $2^{\circ}C$에서 거의 일어나지 않았고 염주전분은 완만하게 노화되었다.
In this study, real-time absorption coefficients of carbonaceous species in $PM_{2.5}$ was observed using a dual-spot 7-wavelength Aethalometer between November 1, 2016 and December 31, 2017 at an urban site of Gwangju. In addition, 24-hr integrated $PM_{2.5}$ samples were simultaneously collected at the same site and analyzed for organic carbon and elemental carbon (OC and EC) using the thermal-optical transmittance protocol. A main objective of this study was to estimate mass absorption cross section (MAC) values of black carbon (BC) particles at the study site using the linear regression between aethalometer-based absorption coefficient and filter-based EC concentration. BC particles observed at 880 nm is mainly emitted from combustion of fossil fuels, and their concentration is typically reported as equivalent BC concentration (eBC). eBC concentration calculated using MAC value of $7.77m^2/g$ at wavelength of 880 nm, which was proposed by a manufacturer, ranged from 0.3 to $7.4{\mu}g/m^3$ with an average value of $1.9{\pm}1.2{\mu}g/m^3$, accounting for 7.3% (1.5~20.9%) of $PM_{2.5}$. The relationship between aerosol absorption coefficients at 880 nm and EC concentrations provided BC MAC value of $15.2m^2/g$, ranging from 11.4 to $16.2m^2/g$. The eBC concentrations calculated using the estimated MAC of $15.2m^2/g$ were significantly lower than those reported originally from aethalometer, and ranged from 0.2 to $3.8{\mu}g/m^3$, with an average of $1.0{\pm}0.6{\mu}g/m^3$, accounting for 3.7% of $PM_{2.5}$ (0.8~10.7%). Result from this study suggests that if the MAC value recommended by the manufacturer is applied to calculate the equivalent BC concentration and radiative forcing due to BC absorption, they would result in significant errors, implying investigation of an unique MAC value of BC particles at a study site.
The current spectral shape matching method (SSMM), developed by Ahn and Shanmugam (2004), relies on the assumption that the path radiance resulting from scattered photons due to air molecules and aerosols and possibly direct-reflected light from the air-sea interface is spatially homogeneous over the sub-scene of interest, enabling the retrieval of water-leaving radiances ($L_w$) from the satellite ocean color image data. This assumption remains valid for the clear atmospheric conditions, but when the distribution of aerosol loadings varies dramatically the above postulation of spatial homogeneity will be violated. In this study, we present the second version of SSMM which will take into account the horizontal variations of aerosol loading in the correction of atmospheric effects in SeaWiFS ocean color image data. The new version includes models for the correction of the effects of aerosols and Raleigh particles and a method fur computation of diffuse transmittance ($t_{os}$) as similar to SeaWiFS. We tested this method over the different optical environments and compared its effectiveness with the results of standard atmospheric correction (SAC) algorithm (Gordon and Wang, 1994) and those from in-situ observations. Findings revealed that the SAC algorithm appeared to distort the spectral shape of water-leaving radiance spectra in suspended sediments (SS) and algal bloom dominated-areas and frequently yielded underestimated or often negative values in the lower green and blue part of the electromagnetic spectrum. Retrieval of water-leaving radiances in coastal waters with very high sediments, for instance = > 8g $m^{-3}$, was not possible with the SAC algorithm. As the current SAC algorithm does not include models for the Asian aerosols, the water-leaving radiances over the aerosol-dominated areas could not be retrieved from the image and large errors often resulted from an inappropriate extrapolation of the estimated aerosol radiance from two IR bands to visible spectrum. In contrast to the above results, the new SSMM enabled accurate retrieval of water-leaving radiances in a various range of turbid waters with SS concentrations from 1 to 100 g $m^{-3}$ that closely matched with those from the in-situ observations. Regardless of the spectral band, the RMS error deviation was minimum of 0.003 and maximum of 0.46, in contrast with those of 0.26 and 0.81, respectively, for SAC algorithm. The new SSMM also remove all aerosol effects excluding areas for which the signal-to-noise ratio is much lower than the water signal.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.