• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.224-227
• /
• 2006

For estimation of three inherent optical properties (IOPs), the absorption coefficients for phytoplankton ($a_{ph}$) and suspended solid particle ($a_{ss}$) and dissolved organic matter ($a_{dom}$), from ocean reflectance, we used inversion of remote sensing reflectance model (Ahn et al., 2001) at this study. The IOP inversion model assumes that (1) the relationship between remote sensing reflectance ($R_{rs}$) and absorption (a) and backscattering ($b_{b}$) is well known, (2) the optical coefficients for pure water ($a_{w}$, $b_{bw}$) are known, (3) the spectral shapes of the specific absorption coefficients for phytoplankton ($a^*_{ph}$) and suspended solid particle ($a^*_{ss}$) and the specific backscattering coefficients for phytoplankton ($b_b^*_{ph}$) and suspended solid particle ($b_b^*_{ss}$) are known. The input data of IOP inversion model is used in-situ ocean optical data at the seawater around the Korea Peninsula for 5 years (2001-2005). We compared the output data of the IOP inversion model and the in-situ observation for seawater around the Korea Peninsula.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.324-327
• /
• 2006

This research is about the optical characteristic of red tide which is collected from Nam-Hae for basic research of red tide remote sensing technique development. 21 kinds of red tide organisms are cultivated to investigate optical characteristic of them on the level of laboratory, and chlorophyll specific absorption coefficient($a^*$) and backscattering coefficient($b_b^*$) are estimated by using spectrophotometer. Absorption spectrums according to species are appeared diversely from 0.005 to 0.06 (mg/ $m^2$), and the shapes of spectrums are also different. The range of $b_b^*$ are appeared $10^{-2}{\sim}10^{-4}$ mg/ $m^2$, which have around 100 times differences between species, and the shape of spectrum also have significant difference between species. These results are able to use as an input data of inverse model from ocean color.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume I
• /
• pp.372-375
• /
• 2006

The MSC is a high resolution multi-spectral camera system which is mounted on the KOMPSAT-II satellite. The electro-optic camera system has a refocusing mechanism which can be used in-orbit by ground commands. By adjusting locations of some elements in optics, the system can be focused precisely. The focus mechanism in MSC is implemented with stepper motor and potentiometer. By reading the value of the potentiometer, rough position of the motor can be understood. The exact location of the motor can not be acquired because the information from the potentiometer can not be so accurate. However, before and after certain events of the satellite, like a satellite launch, the direction of the movement or order of the magnitude of the movement can be understood. In this paper, the trend analysis of the focus motor position during the ground test phase is introduced. This result can be used as basic information for the focus calibration after launch. By studying the long term trend, deviation from the best focal point can be understood. The positions of the focus motors after launch are also compared.

• 항공우주산업기술동향
• /
• 제8권2호
• /
• pp.98-104
• /
• 2010

광학위성영상의 다양한 활용성을 바탕으로 위성영상에 대한 다양하고 많은 수요가 지속적으로 증대되고 있다. 그러나, 태양광에 의한 영상획득을 기반으로 하는 광학영상의 획득은 기상상황 및 밤낮에 대한 제약을 가지고 있을 수 밖에 없다. 이에 따라 전파를 이용한 영상레이더(Synthetic Aperture Radar; SAR)를 통한 영상획득은 위성영상 수요 활성화 및 다양한 활용분야에 수요를 증가시키고 있다. 본 논문에서는 고품질의 레이더영상을 획득하기 위해 반드시 필요한 영상레이더의 검보정을 위한 시스템을 논의하고자 한다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.637-640
• /
• 2005

In the development of a electronic system for a optical payload comprising mainly EOS(Electro-Optical Sub-system) and PDTS(Payload Data Transmission Sub-system), many aspects should be investigated and discussed for the easy implementation, for th e higher reliability of operation and for the effective ness in cost, size and weight as well as for the secure interface with components of a satellite bus, etc. As important aspects the interfaces between a satellite bus and a payload, and some design features of the CEU(Camera Electronics Unit) inside the payload are described in this paper. Interfaces between a satellite bus and a payload depend considerably on whether t he payload carries the PMU(Payload Management Un it), which functions as main controller of the Payload, or not. With the PMU inside the payload, EOS and PDTS control is performed through the PMU keep ing the least interfaces of control signals and primary power lines, while the EOS and PDTS control is performed directly by the satellite bus components using relatively many control signals when no PMU exists inside the payload. For the CEU design the output channel configurations of panchromatic and multi-spectral bands including the video image data inter face between EOS and PDTS are described conceptually. The timing information control which is also important and necessary to interpret the received image data is described.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.805-808
• /
• 2005

This paper is a study on an optical bench satisfying stiffness and thermal pointing error requirements for LEO earth observation satellite. According to shape and stiffness requirements, optical bench type 1 is designed. Because type 1 does not satisfy the thermal pointing error requirement, an optical bench type 2 is suggested. Although the type 2 has better results than type 1, it still does not meet the thermal pointing error requirement. Using the results of optical bench type 1&2, the optical bench type 3 is finally designed, which satisfies both the stiffness and thermal pointing error requirements.

• 항공우주시스템공학회지
• /
• 제12권3호
• /
• pp.9-17
• /
• 2018

지구 관측용 소형 위성카메라의 경우, 중대형 위성에 비해 상대적으로 약한 구조 안정성으로 인해 열악한 발사환경 및 우주환경에서 광부품의 정렬오차가 발생하기 쉽다. 발생한 정렬오차는 위성카메라의 광학 성능 저하를 유발시킨다. 본 연구에서는 소형 위성 카메라의 정렬오차를 보상하기 위하여 3축 포커스 메커니즘을 제안하였다. 이 메커니즘은 3개의 압전 작동기로 구성되어 x-축, y-축 틸트 및 디스페이스(De-space) 보정을 수행할 수 있다. 포커스 메커니즘의 설계 요구조건은 슈미트-카세그레인(Schmidt-Cassegrain) 타입의 목표 광학계 설계에서 도출되었다. 부경 정렬오차 보상을 위하여 부 반사경의 뒤에 포커스 메커니즘을 부착하여 부경의 3축 운동을 제어하였다. 이 때 파면오차로 인한 광학 성능 저하를 최소화하기 위한 플렉셔를 Box-Behnken 실험계획법을 통하여 설계하였으며, ANSYS를 이용하여 파면오차 해석을 수행하였다. 제작된 포커스 메커니즘은 작동기의 수학적 모델링, PID 제어기 설계, 서보 제어실험을 통해 서보성능을 검증하였다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.232-235
• /
• 2008

The mission of the EO(electro-optical) based low earth orbit satellite is provision of the high-resolution images required for GIS(Geographical Information Systems) establishment and the applications for environmental, agriculture and ocean monitoring. AEISS(Advanced Earth Imaging Sensor System) which is the main payload on the satellite consists of EOS(electro-optical subsystem) and PDTS(Payload Data Transmission Sub-system). IDHU(Image Data Handling Unit) which is one of the major unit in PDTS is capable of compression, storage, encryption and encoding. In this paper, the payload system of the EO based satellite is briefly introduced and the influence of the compression on AEISS is analyzed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.242-245
• /
• 2006

This paper is an assessment on the dynamic test results of optical bench for LEO satellite. According to the design requirements, optical bench was designed and manufactured. Dynamic test was performed to verify stability of optical bench. Low level random vibration test, sine burst test and sine vibration test are carried out to identify dynamic characteristics and to verify static strength and safety under quasi-static load conditions. From the result it can be stated that the optical bench is well qualified under the launch environmental conditions.

• Corrosion Science and Technology
• /
• 제18권5호
• /
• pp.182-189
• /
• 2019

A thin spray coating of inorganic black lithium polysilicate (IBLP) on black anodized AZ31B magnesium alloy was fabricated for better corrosion resistance and thermo-optical properties for thermal control of spacecraft components. The morphology of the specimens with and without IBLP-based spray coating was characterized by SEM-EDS techniques. Impedance and potentiodynamic measurements on the specimens revealed better corrosion resistance for the specimen with a thin coating of lithium polysilicate. This was primarily due to the presence of lithium polysilicate inside the micro-cracks of the black anodized specimen, restricting the diffusion paths for corrosive media. Environmental tests, namely, humidity, thermal cycling, thermo vacuum performance, were used to evaluate the space-worthiness of the coating. The thermo-optical properties of the coating were measured before and after each environmental test to ascertain its stability. The specimen with an IBLP-based spray coating showed enhanced thermo-optical properties, greater than ~0.90. Hence, the proposed coating demonstrated better handling, better corrosion resistance, and space-worthiness during the pre-launch phase owing to its improved thermo-optical properties.