• Title/Summary/Keyword: optical router

Search Result 31, Processing Time 0.027 seconds

Shared-type Encoder/Decoder Based on 2-D Optical Codes for Large Capacity Optical CDMA Network (대용량 광 부호 분할 다중접속(Optical CDMA) 네트워크를 위한 2차원 코드의 공유형 부호기/복호기)

  • Ko Wonseok;Shin Seoyong;Hwang Humor;Chang Chulho
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.30 no.5A
    • /
    • pp.359-369
    • /
    • 2005
  • For large capacity optical CDMA networks, we propose a shared-type encoder/decoders based on an tunable wavelength converter(TWC) and an arrayed waveguide grating (AWG) router. The proposed encoder/decoder treats codewords of wavelength/time 2-D code simultaneously using the dynamic code allocation property of the TWC and the cyclic property of the AWG router, and multiple subscribers can share the encoder/decoder in networks. Feasibility of the structure of the proposed encoder/decoder for dynamic code allocation is tested through simulations using two wavelength/time 2-D codes, which are the generalized multi-wavelength prime code(GMWPC) and the generalized multi-wavelength Reed-Solomon code(GMWRSC). Test results show that the proposed encoder/decoder can increase the channel efficiency not only by increasing the number of simultaneous users without any multiple-access interference but by using a relatively short length CDMA codes.

A photonic packet switching system with contention resolution capability (충돌제어 기능을 갖는 광 패킷 스위칭 시스템 연구)

  • 이기철;이성철;이성근;정지채;강철희;박진우
    • Journal of the Korean Institute of Telematics and Electronics D
    • /
    • v.34D no.8
    • /
    • pp.52-61
    • /
    • 1997
  • In this paper it is proposed a new architecture for N*N optical packet switching system. It consists of active-splitter type pf packet router, travelling type of optical buffer memory for packet contention resoltuion and an electronic controller. the BER performance of the proposed switching system is analyzed with respect to channel crosstalks and amplified spontaneous emissio noise form switching elements and optical amplifiers respectively. Operational validity of the proposed switching system is also experimentally proved by realizing 2*2 optical packet switching system.

  • PDF

Design of an Optical Edge LSR for MPLmS based VPN Service (MPLmS기반의 Optical VPN 서비스를 위한 에지 라우터 설계)

  • 오홍석;김명회;이현태
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2002.11a
    • /
    • pp.301-305
    • /
    • 2002
  • 본 논문에서는 MPLmS(Multiprotocol Lambda Switching) 기반의 Optical VPN 서비스를 제공하는 에지 라우터를 설계하기 위하여 MPLmS 기반의 VPN(Virtual Private Network) 모델과 동작 구조를 기반으로 에지 O-LSR(Optical Label Switching Router)의 기능적 블록을 설계하고 VPN 패킷 전달을 위한 라우팅 테이블을 설계한다.

  • PDF

Performance Evaluation of Energy Saving in Core Router and Edge Router Architectures with LPI for Green OBS Networks (Green OBS 망에서 LPI를 이용하는 코어 및 에지 라우터 구조의 에너지 절감 성능 분석)

  • Yang, Won-Hyuk;Jeong, Jin-Hyo;Kim, Young-Chon
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.37 no.2B
    • /
    • pp.130-137
    • /
    • 2012
  • In this paper, we propose core and edge router architectures with LPI(Low Power Idle) for reducing energy consumption in OBS networks. The proposed core router architecture is comprised of a BCP switch, a burst switch, line cards and sleep/wake controller for LPI. When the offered load of network is low, sleep/wake controller can change the state of the core router line card from active to sleep state for saving the energy after receiving network control packet. The edge router consists of a switch for access line card, a SCU and OBS edge router line cards. The LPI function in edge router line card is performed through network level control by network control packet, individually. Additionally, PHY/transceiver modules can transition active state to sleep state when burst assemble engine generates new bursts. To evaluate the energy saving performance of proposed architecture with LPI, the power consumption of each router is analyzed by using data sheet of commercial router and optical device. And, simulation is also performed in terms of sleep time of PHY/Transceiver through OPNET.

Congestion Control for Burst Loss Reduction in Labeled OBS Network (Labeled OBS 망에서의 버스트 손실 감소를 위한 혼잡 제어)

  • Park Jonghun;Yoo Myungsik
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.30 no.6B
    • /
    • pp.331-337
    • /
    • 2005
  • The optical Internet is considered as a feasible solution for transporting huge amount of traffic volume in the future Internet. Among optical switching technology for the optical Internet, OBS becomes one of the most promoting solution. Recently, a lebeled OBS(LOBS) architecture is considered for an efficient control on OBS network. Given that a data burst may contain few thousands of IP packets, a single loss of data burst results in a serious throughput degradation in LOBS network. In this paper, we improve the performance of LOBS network by introducing the burst congestion control mechanism. More specifically, the OBS router at the network core detects the network congestion by measuring the loss probability of burst control packet. The OBS router at the network edge reduces the burst generation according to the network condition repored by the OBS router at the network core. Through the simulations, it is shown that the proposed congestion control mechanism can reduce the burst loss probability and improve the LOBS network throughput.

Blocking probability improvement for Lightpath Setup based on GMPLS (GMPLS망 기반의 광 경로 설정을 위한 블로킹율 개선 방안)

  • Im Song-Bin;Kim Kyoung-Mok;Oh Young-Hwan
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.41 no.12
    • /
    • pp.41-49
    • /
    • 2004
  • Increase of internet users and new types of applied traffics, have led to demand for more bandwidth for each application. Hence, the amount of internet traffic has risen sharply and it has demanded to use limited resources, such as wavelength and bandwidth, more effectively. These kind of needs can be satisfied with OXC(Optical cross-connects) based on GMPLS that carry out IP packet switching and wavelength switching at the same time and Provide very wide bandwidth. In RSVP-TE signaling of GMPLS studied by IETF. every lambda router in core network should be able to convert wavelength. So, lots of wavelength converters and needed and building and managing cost is high. Another problem is that optimized traffic is limited. In this paper We suggest strengthened GMPLS RSVP-TE signaling algorithm for a better lightpath setup. When setup signaling is blocked suggested algorithm does not send PathErr message to Edge Router, but looks for nearest lambda router which can convert wavelength and carry out setup signaling from that node. Such algorithm can reduce the chance of blocked lightpath setup signaling and provide effective arrangement of lambda router in core network by calculating proper number of wavelength converter.

Optical BGP Routing Convergence in Lightpath Failure of Optical Internet

  • Jeong, Sang-Jin;Youn, Chan-Hyun;Kang, Min-Ho;Min, Kyoung-Seon;Hong, Hyun-Ha;Kim, Hae-Geun
    • ETRI Journal
    • /
    • v.24 no.2
    • /
    • pp.97-108
    • /
    • 2002
  • Optical Border Gateway Protocol (OBGP) is an extension to BGP for Optical Cross Connects (OXCs) to automatically setup multiple direct optical lightpaths between many different autonomous domains. With OBGP, the routing component of a network may be distributed to the edge of the network while the packet classification and forwarding is done in the core. However, it is necessary to analyze the stable convergence functions of OBGP in case of lightpath failures. In this paper, we first describe the architecture of the OBGP model and analyze the potential problems of OBGP, e.g., virtual BGP router convergence behavior in the presence of lightpath failure. We then propose an OBGP convergence model derived from an inter-AS (Autonomous System) relationship. The evaluation results show that the proposed model can be used for a stable OBGP routing policy and OBGP routing convergence under lightpath failures of the optical Internet.

  • PDF

An Integrated Network Control Framework for the Next-Generation Optical Internet (차세대 광 패킷 인터넷을 위한 통합 네트워크 제어 구조)

  • Park, Sung-Yong
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.6 no.8
    • /
    • pp.666-671
    • /
    • 2000
  • With the current advances in optical WDM (Wavelength Division Multiplexing) networking technologies and the increasing demand for network bandwidth the Next Generation Internet is expected to be a network that runs IP(Internet Protocol) directly over WDM-based optical networks. The network control architecture for the IP over WDM networks is different from that of traditional Internet since the underlying WDM devices have more constraints than electronic IP routers such as the lack of optical buffers and wavelength continuity property etc. In this paper we introduce several architectural models for implementing IP over WDM networks and propose an integrated network control framework for the IP over WDM networks. This framework leverages the traffic engineering control architecture for the MPLS (Multi-Protocol Label Switching) networks and is mainly developed for the IP over packet-switched WDM networks. We also report several preliminary simulation results of contention resolution schemes in the packet-switched WDM networks.

  • PDF

Optical CDMA Network Codecs with Symmetric Balance Incomplete Block Design Code and Arrayed-Waveguide Grating (Symmetric Balance Incomplete Block Design Code와 Arrayed-Waveguide Grating을 이용한 Optical CDMA Network Codecs)

  • Jhee, Yoon-Kyoo
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.49 no.5
    • /
    • pp.22-29
    • /
    • 2012
  • By using the cyclic properties of symmetric balance incomplete block design(BIBD) codes and arrayed-waveguide grating(AWG) routers, a compact optical CDMA network coder-decoder(codec) can be constructed. It can be observed that the various code families obtained by BIBD improve the BER performance compared to M-sequence code.

A Study on Measurement Method of Optical Path Error in Arrayed Waveguide Grating Router (광도파로열 격자 라우터의 경로오차 측정 방법에 관한 연구)

  • Park, Jae-Sung;Chung, Young-Chul;Mun, Seong-Uk
    • Proceedings of the KIEE Conference
    • /
    • 1999.07e
    • /
    • pp.2431-2433
    • /
    • 1999
  • Phase errors of arrayed waveguide degrade the performance of AWG router, especially for dense WDM system. So it is necessary to measure the phase error and to compensate. The analysis method of the interference signal from the low coherence interferometer to measure the path length difference phase error is studied. The interference signal generated assuming the intentional path length difference errors of 0.1$\sim$0.4${\mu}m$ are analyzed and the results show that the path length difference phase error of ${\Delta}L$ within ${\pm}14^{\circ}$ of sampling phase error can be accurately measured.

  • PDF