• Current Optics and Photonics
• /
• 제5권6호
• /
• pp.606-616
• /
• 2021

A photonic integrated interferometric imaging system possesses the characteristics of small-scale, low weight, low power consumption, and better image quality. It has potential application for replacing conventional large space telescopes. In this paper, the principle of photonic integrated interferometric imaging is investigated. A novel lenslet array arrangement and lenslet pairing approach are proposed, which are helpful in improving spatial frequency coverage. For the novel lenslet array arrangement, two short interference arms were evenly distributed between two adjacent long interference arms. Each lenslet in the array would be paired twice through the novel lenslet pairing approach. Moreover, the image reconstruction model for optical interferometric imaging based on compressed sensing was established. Image simulation results show that the peak signal to noise ratio (PSNR) of the reconstructed image based on compressive sensing is about 10 dB higher than that of the direct restored image. Meanwhile, the normalized mean square error (NMSE) of the direct restored image is approximately 0.38 higher than that of the reconstructed image. Structural similarity index measure (SSIM) of the reconstructed image based on compressed sensing is about 0.33 higher than that of the direct restored image. The increased spatial frequency coverage and image reconstruction approach jointly contribute to better image quality of the photonic integrated interferometric imaging system.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 추계학술대회
• /
• pp.658-660
• /
• 2021

본 연구의 목표는 확산 광학 단층 촬영에 대한 기준 영상을 사용하여 동질성과 이질성을 분리하기 위한 재구성된 영상들간의 수치적 평가를 위해 구조적 유사성 지수에 기초한 알고리즘을 개발한다. 글로벌 지오메트리 및 관심 영역 평가는 유사성을 산출하기 위해 측정되었으며, 그 결과 구조적 유사성 지수의 평균이 모델 내부에 가시적 포함 여부를 판단할 수 있는 잠재적 성능을 나타낸다는 것을 알 수 있으며, 구조적 유사성 지수는 유방 구조 정보를 평가하기 위한 이미지 평가를 지원 가능한 것으로 확인 되었다.

• 대한원격탐사학회지
• /
• 제34권6_1호
• /
• pp.857-868
• /
• 2018

특정 지점에서 대기 에어러솔의 미세물리적 특성과 시공간적 분포는 에어로솔 입자의 광학특성을 파악하기 위한 중요한 변수이다. 이러한 에어러솔의 광학특성값에 대한 정확한 산출은 복사전달 모의 과정에서 정확한 값을 제공함으로 중요한 역할을 가지게 된다. 따라서 본 연구는 사용자가 요구하는 시공간적 조건에서 정확한 에어로솔 모델을 산출하기 위한 방법으로서 재분석 자료와 광학 특성 데이터 베이스를 이용한 시너지 에어로솔 모델을 산출하는 방법을 제시하였다. 제안된 시너지 에어로솔 모델은 에어로솔의 주요 성분별 광학두께(Aerosol Optical Depth; AOD)값에 의하여 가중치가 적용된 혼합 에어러솔 형태의 광학 모델을 산출하기 위함이며, $40{\mu}m$까지의 파장영역에서 광학특성값을 제공한다. 주요 에어로솔 이벤트 사례에 대하여, 시너지적 에어러솔 모델(Synergy Aerosol Model; SAM)은 기존의 복사전달 모델에서 사용되고 있는 표준 에어러솔 모델과는 차별적인 결과를 보여주었으며, 지상관측 Aerosol Robotic Network(AERONET) inversion 산출물과의 비교를 통하여 오차범위 내의 정량적인 결과를 가지고 있는 것을 보였다. 따라서, 복사전달 모의에 있어 시너지 에어로솔 모델의 사용은 실제 대기 중 에어러솔에 의한 영향을 정량적으로 평가하는데 도움을 줄 수 있을 것이며, 개선된 복사 모의 결과를 얻을 수 있을 것이다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.56.1-56.1
• /
• 2011

The solar and meteorological resources map is calculated using by one-layer solar radiation model (GWNU model), satellites data and numerical model output on the Korean peninsula. The Meteorological input data to perform the GWNU model are retrieved aerosol optical thickness from MODIS (TERA/AQUA), total ozone amount from OMI (AURA), cloud fraction from geostationary satellites (MTSAT-1R) and temperature, pressure and total precipitable water from output of RDAPS (Regional Data Assimilation and Prediction System) and KLAPS (Korea Local Analysis and Prediction System) model operated by KMA (Korea Meteorological Administration). The model is carried out every hour using by the meteorological data (total ozone amount, aerosol optical thickness, temperature, pressure and cloud amount) and the basic data (surface albedo and DEM). And the result is analyzed the distribution in time and space and validated with 22 meteorological solar observations. The solar resources map is used to the solar energy-related industries and assessment of the potential resources for solar plant. The National Institute of Meteorological Research in KMA released $4km{\times}4km$ solar map in 2008 and updated solar map with $1km{\times}1km$ resolution and topological effect in 2010. The meteorological resources map homepage (http://www.greenmap.go.kr) is provided the various information and result for the meteorological-solar resources map.

• 한국해양공학회지
• /
• 제36권3호
• /
• pp.153-160
• /
• 2022

Moored floating platforms have great potential in ocean engineering applications because a mooring system is necessary to keep the platform in station, which is directly related to the operational efficiency and safety of the platform. This paper briefly introduces the technical and operational details of an optical sensor for measuring the tension of mooring lines of a moored platform in waves. In order to check the performance of optical sensors, an experiment with a moored floating platform in waves is carried out in the wave tank at Changwon National University. The experiment is performed in regular waves and irregular waves with a semi-submersible and triangle platform. The performance of the optical sensor is confirmed by comparing the results of the tension of the mooring lines by the optical sensor and tension gauges. The maximum tension of the mooring lines is estimated to investigate the mooring dynamics due to the effect of the wave direction and wavelength in the regular waves. The significant value of the tension of mooring lines in various wave directions is estimated in the case of irregular waves. The results show that the optical sensor is effective in measuring the tension of the mooring lines.

• 한국광학회지
• /
• 제25권2호
• /
• pp.95-101
• /
• 2014

표면 플라즈몬 공명 (SPR) 센서에서 금속 전극에 전압을 걸었을 경우, 표면에 여기 되는 전기장에 의해 전하가 쌓이게 된다. 이는 금속 표면의 광학적 성질과 표면 플라즈몬 공명 각도의 변화를 야기시킨다. 본 논문에서는 그에 대한 검증을 위해 다양한 산도 조건의 수용액 하에서 금속에 전압을 걸었을 때의SPR 각도 변화를 측정하였고, 누적 전하량과 공명 각도에 대한 의존성을 그렸을 때 수용액의 산도에 관계없이 일치함을 확인 하였다. 이 관계를 설명하는 기존의 공간전하층(SCL) 모델과 비교해보고 실험결과와 어긋나는 부분과도 잘 맞는 수정된 SCL 모델을 제시하였다. 이 결과는 표면 플라즈몬 공명 센서의 응용과 금속박막의 광학적 성질에 대한 연구에 기여할 거라 기대된다.

• Bulletin of the Korean Chemical Society
• /
• 제13권4호
• /
• pp.385-388
• /
• 1992

The transition probabilities for the thermal intramolecular electron transfer and the optical intervalence transfer band for a symmetric mixed-valence Cu(I)-Cu(II) compound were used to extract the PKS parameters $\varepsilon$ = -1.15, ${\lambda}$ = 2.839, and ${\nu}g$- = 923 $cm^{-1}$. These parameters determine the potential energy surfaces and vibronic energy levels. Three pairs of vibrational levels are below the top of the energy barrier in the lower potential surface. The contribution of each vibrational state to the intramolecular electron transfer was calculated. It is shown that the three pairs of vibrational states below the top of the barrier are responsible for most of the electron transfer at 261-306 K. So the intramolecular electron transfer in this system is a tunneling process. The transition probability exhibits the usual high-temperature Arrhenius behavior, but at lower temperature falls off to a temperature-independent value as tunneling from the lowest levels becomes the limiting process.

• Journal of Biosystems Engineering
• /
• 제33권4호
• /
• pp.260-268
• /
• 2008

Optical diffuse reflectance sensing has potential for rapid and reliable on-site estimation of soil properties. For good results, proper calibration to measured soil properties is required. One issue is whether it is necessary to develop calibrations using samples from the specific area or areas (e.g., field, soil series) in which the sensor will be applied, or whether a general "factory" calibration is sufficient. A further question is if specific calibration is required, how many sample points are needed. In this study, these issues were addressed using data from 42 paddy fields representing 14 distinct soil series accounting for 74% of the total Korean paddy field area. Partial least squares (PLS) regression was used to develop calibrations between soil properties and reflectance spectra. Model evaluation was based on coefficient of determination ($R^2$) root mean square error of prediction (RMSEP), and RPD, the ratio of standard deviation to RMSEP. When sample data from a soil series were included in the calibration stage (full information calibration), RPD values of prediction models were increased by 0.03 to 3.32, compared with results from calibration models not including data from the test soil series (calibration without site-specific information). Higher $R^2$ values were also obtained in most cases. Including some samples from the test soil series (hybrid calibration) generally increased RPD rapidly up to a certain number of sample points. A large portion of the potential improvement could be obtained by adding about 8 to 22 points, depending on the soil properties to be estimated, where the numbers were 10 to 18 for pH, 18-22 for EC, and 8 to 22 for total C. These results provide guidance on sampling and calibration requirements for NIR soil property estimation.

• Journal of the Optical Society of Korea
• /
• 제19권1호
• /
• pp.13-21
• /
• 2015

In recent years energy consumption has become a main concern for network development, due to the exponential increase of network traffic. Potential energy savings can be obtained from a load-adaptive scheme, in which a day can be divided into multiple time periods according to the variation of daily traffic patterns. The energy consumption of the network can be reduced by selectively turning off network components during the time periods with light traffic. However, the time segmentation of daily traffic patterns affects the energy savings when designing multiperiod logical topology in optical wavelength routed networks. In addition, turning network components on or off may increase the overhead of logical topology reconfiguration (LTR). In this paper, we propose two mixed integer linear programming (MILP) models to design the optimal logical topology for multiple periods in IP-over-WDM networks. First, we formulate the time-segmentation problem as an MILP model to optimally determine the boundaries for each period, with the objective to minimize total network energy consumption. Second, another MILP formulation is proposed to minimize both the overall power consumption (PC) and the reconfiguration overhead (RO). The proposed models are evaluated and compared to conventional schemes, in view of PC and RO, through case studies.

• Bulletin of the Korean Chemical Society
• /
• 제31권1호
• /
• pp.92-99
• /
• 2010

Photoexcitation of a precursor ion inside a cell floated at high voltage installed in a tandem time-of-flight (TOF) mass spectrometer provides triple tandem mass spectrometric information and allows kinetic and mechanistic studies. In this work, the factors affecting, or downgrading, the performance of the technique were identified. Ion-optical and computational analyses showed that an optimum instrument could be designed by utilizing a reflectron with linear-plus-quadratic potential inside. Theoretical predictions were confirmed by tests with instruments built with different ion-optical layout. With optimized instruments, masses of intermediate ions in the consecutive dissociation of a precursor ion could be determined with the maximum error of $\pm5$ Da. We also observed excellent agreement in dynamical parameters (critical energy and entropy) for the dissociation of a model peptide ion determined by instruments with different ion-optical layout operated under optimum conditions. This suggests that these parameters can be determined reliably by the kinetic method developed previously when properly designed and operated tandem TOF instruments are used.