• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.434.1-434.1
• /
• 2014

최근 자성 나노 입자를 이용한 온열치료가 주목을 받고 있다. 자성을 띄는 나노 입자를 암 세포에 보내, 교류 자기장을 걸어주어 회전에 의한 마찰손실로 인한 열을 이용하여 암 조직만을 국소 가열하는 원리이다. 본 실험은 유도 자기장을 사용한 자성 나노 파우더의 가열을 목적으로 시행하였다. 나선형 코일위에 세라믹, 유리 등 절연체 원판 위에 자기장이 발생되도록 휴대용 평판형 자기장 발생장치를 제작하였다. 자기장 발생 장치는 평판형 나선형 코일에 특정 주파수를 가진 전원을 인가하여 자기장을 발생시킨다. 평판형 나선형 코일은 내경 40 mm, 외경 140 mm, 2 mm 동선으로 제작하였다. 제작한 자기장 발생장치를 자기장 측정 센서(Hall sensor 등)을 원판 위에 설치하여 거리별 자기장의 크기를 측정하였다. 자기장은 나선형 코일 위 원판 중심에서 최대로 발생되어 중심에서 멀어질수록 크기가 감소하였다. 자기장 발생장치 위에 자성 나노 파우더($Fe_3O_4$와 $CoFe_2O_4$)를 혼합한 용액 시료를 위치시키고 자기 쌍극자 모멘트와 자기장간의 상호작용을 유도한다. 이때 자성 나노 파우더별로 발생하는 열을 열전쌍(TC)이나 Optical fiber를 사용한 Thermometer로 측정하여 비교분석하였다.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.242-243
• /
• 2007

본 논문은 1310nm 단일모드 광섬유를 이용하여 온도센서로 활용하기 위한 연구이다. 기존광섬유센서의 연구는 복잡한 여러 가지 기기를 이용하여 구성된 시스템이었다. 그리고 산란 변화를 주기 위하여 Bragg 격자나 Pulse generator를 이용하여 광주파수의 변화를 측정하거나, YAG 레이저를 이용 벌크형 시스템을 택하여 구성하였는데 실험 환경을 구성하는 어려움과 측정된 데이터의 정확도에 대한 문제점이 있었다. 본 연구에서 제안한 유도 브릴루앙 산란(sBs: stimulated Brillouin scattering)광을 이용한 온도센서 시스템은 기존의 측정방식 보다 간소화된 직렬방식의 시스템이다. 광주파수에서 발생하는 노이즈와 애매한 결과에 대해서 신뢰성과 정확도를 확보하기 위하여 지능형인 뉴로-퍼지 알고리즘을 이용하여 분석함으로써 기존 시스템 보다 정확한 데이터를 얻고자 하였다. 본 연구에서 sBs는 빛의 산란 특성 중 광주파수가 온도에 변화에 대해 각각의 온도 변화당 천이가 이루어졌음을 측정하였다. 시스템에서 출력된 데이터를 뉴로-퍼지로 분석한 변화율은 1.1MHz/의 결과를 얻었다.

• Design & Manufacturing
• /
• v.16 no.3
• /
• pp.39-43
• /
• 2022

In this study, we designed an vibration cutting tool that can achieve improvements such as low cutting force, interrupted chip evacuation and better surface quality of cutting performance to obtain high-quality surface roughness and improvement of tool wear, which is an issue in the machining of high-hardness mold steel. Among the resonance frequency modes of the vibration cutting tool, the bending mode was used to maximize the driving amplitude of the vibration tool tip, and the resonance frequency was confirmed through the finite element method. After measuring the actual resonant frequency of the designed tool using an optical fiber sensor, the cutting force and machining surface of vibration cutting and conventional cutting were compared and analyzed in the turning process of high hardness mold steel (STAVAX). As a result of the experiment, the cutting force was reduced by about 20 % compared to the conventional cutting process, and the surface roughness was also improved by about 60 %. This study suggested that the tool wear and surface quality of high-hardness steel can be improved through the vibration cutting method in the machining of high hardness mold steel.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.04a
• /
• pp.308-311
• /
• 2010

1990년 이후 우리나라를 둘러싼 동북아시아를 비롯하여 동남아시아의 도시에 이르기까지 지진, 태풍, 쓰나미 등의 환경재해가 빈발하고 있는 상황이다. 또한 최근 아이티, 칠레에서의 지진 발생뿐만 아니라 국내 수도권에서도 지진이 발생하여 자연지해에 대한 우려가 많아지고 있다. 현대의 건축물들은 다양한 자연재해로부터 취약할 수밖에 없으므로, 이를 최대한 빠르게 확인하여 경보하는 것만이 인명 및 재산의 피해를 최소화할 수 있는 방법이다. 본 연구에서는 구조물 건전성 진단을 위한 통합 모니터링 시스템에 대하여 소개한다. PDA나 스마트폰을 갖고 있는 관리자는 실시간으로 통합 모니터링 시스템에 접근하여, 해당 구조물의 상태를 확인함으로써 피해 상황을 파악한다. 시설물 유지 관리자에게 건전성 유무를 판단할 자료를 실시간으로 제공하는 것은 조기대응으로 인한 현재의 피해를 최소화할 수 있으며, 추후 발생할 수 있는 추가적인 피해를 예방할 수 있는 장점이 있다.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.6
• /
• pp.979-985
• /
• 2001

A fluorometric detection technique for HDL (High Density Lipoprotein) and LDL (Low Density Lipoprotein) was developed for application in a fiber-optic immunosensor using a protein A Langmuir-Blodgget (LB) film. For the fluorescence immunoassay, antibodies specific to HDL or LDL were imobilied on the protein A LB film, and a fluorescence amplification method was developed to overcome their weak fluorescence. The deposition of protein A using the LB technique was monitored using a surface pressure-are $({\pi}-A)$ curve, and the antibody immobilization of the protein A LB film was experimentally verified. The immobilized antibody was used to separate only HDL and LDL from a sample, then the fluorescence of he separated HDL or LDL was amplified. The amount of LDL or HDL was measured using the developed fiber optic fluorescence detection system. The optical properties resulting from the reaction of HDL or LDL with o-phtaldialdehyde, detection range, response time, and stability of the immunoassay were all investigated. The respective detection ranges for HDL and LDL were sufficient to diagnose the risk of coronary heart disease. The amplification step increased the sensitivity, while selective separation using the immobilized antibody led to linearity in the sensor signal. The regeneration of the antibody-immobilized substrate could produce a stable and reproducible immunosensor.

• Journal of Korean Association for Spatial Structures
• /
• v.9 no.3
• /
• pp.67-74
• /
• 2009

Presently means of utilizing sensors such as Piezoelectric(PZT) Element for evaluating the affect of oscillator, strain gauge for analyzing physical changes and use of Fiber Bragg Grating(FBG) Sensor are widely practiced in the field. In this study, PZT and FBG sensors were used to tearing damage of cable systems in these sensors. Cable systems are a construction of elements carrying only tension and no compression or bending in membrane structure. But damage detection of cable systems by using existing safety diagnosis is difficult to detect the characteristic change of overall structural action. If cable snaps are occurred to cable release and tear in tension structures, these are set up a vibration. So, we used piezo-electric materials and result of experiment using this was compared with result of experiment using FBG sensors The purpose of this research is to develop of damage detection method of cable system in tensile stress.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.6
• /
• pp.17-26
• /
• 2011

Ground anchor method is one of the most popular reinforcing technology in Korea. For the sound monitoring of slope reinforced by permanent anchor for a long period, monitoring the tension force of ground anchor is very important. However, special technology except conventional load cell has not been developed for this purpose. In this paper, a new method is described to replace the conventional strain gauge and V.W. type load cell which has been commonly used as a prestress force monitoring tool for a short-term and long-term. Four 11.5 m long strain detectable tension type anchors were made using FBG sensor embedded tendon since FBG sensor is smaller than strain gauge type load cell and does not have noise from electromagnetic wave. Each two set strain detectable tension type anchors were installed into the different ground conditions, i.e., soft rock and weathered granite soil. Prestress force of ground anchor was monitored during the loading-unloading step from in-situ pullout test using proposed FBG sensor embedded in the tendon and the conventional load cell Test results show that the prestress force monitored from FBG sensor may well be used practically, for it almost matches with that measured from expensive load cell.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.6
• /
• pp.699-706
• /
• 2015

This paper presents results of one-year monitoring on prestressing force of a 7-wire steel post-tensioning strand which is installed in a UHPC(ultra high performance concrete) bridge with 11.0 m long, 5.0 m wide, and 0.6 m high by using a FBG-encapsulated 7-wire steel strand. The initial prestressing forces and the prestress changes during a vehicle load test were measured using the FBG-encapsulated strand. The results show that the FBG-encapsulated 7-wire strand is very effective for monitoring the prestress forces even the change in the tension force is very small. Additionally, it was indicated that selection of the thermal expansion coefficient which is used for the temperature correction shall be carefully carried out.

• Korean Journal of Optics and Photonics
• /
• v.17 no.3
• /
• pp.216-222
• /
• 2006

We propose the use of the Gaussian-curve fitting algorithm for the improvement of measurement accuracy in wavelengthscanned Fabry-Perot filter based demodulation systems. The peak locations of FBG sensors were calculated from the fitted curves rather than from distorted PD profiles, resulting in much better measurement accuracy than that of the highest-peak search algorithm. Also, the algorithm was proved to minimize measurement uncertainty of spectrally-distorted grating sensors. From our experimental results, a temperature resolution as small as ${\sim}0.3^{\circ}C$ was readily achieved by use of the Gaussian-curve fitting algorithm whereas the highest-peak search algorithm gave a temperature resolution larger than ${\sim}4^{\circ}C$.

• KSBB Journal
• /
• v.10 no.1
• /
• pp.105-112
• /
• 1995

The fiber-optic biosensor using enzyme-immobilized Langmuir-Blodgett film is developed fort the measurement of ethanol. The enzyme, alcohol dehydrogenase, is immobilized at the molecular level on the arachidic acid monolayer using Langmuir-Blodgett film technique. Based on the ordered multisubstrate mechanism, the immobilized enzyme kinetics is investigated. The optical sensing system is proposed, and sensor signal is proportional to ethanol concentration and is related wish the number of enzyme layers. As the number of deposited LB film layer increases up to 20 1ayers, the high ethanol concentration of 45mM can be measured without the saturation of signal. Surface pressure-area isotherm is measured for the three-different charged-lipids. Arachidic acid is the most suitable for the adsorption of alcohol dehydrogenase based on electrostatic force.