• 제목/요약/키워드: optical distortion

검색결과 389건 처리시간 0.04초

주변부 상의 왜곡을 보정한 모바일 광각 카메라의 광학적 설계 (The Design of Wide Angle Mobile Camera Corrected Optical Distortion for Peripheral Area)

  • 김세진;정혜정;임현선
    • 한국안광학회지
    • /
    • 제18권4호
    • /
    • pp.503-507
    • /
    • 2013
  • 목적: 4매의 비구면 렌즈를 사용하여 optical distortion과 TV distortion을 감소시켜 주변부 상의 왜곡을 줄인 광각의 모바일 카메라를 설계하였다. 방법: 광학적 설계는 화각 $95^{\circ}$에서 ${\pm}1%$내의 optical distortion을 만족하도록 하였으며, 광학계 전체길이는 모바일 카메라의 두께를 고려하여 4.5 mm 이내로 하였다. 센서는 1/3.2"의 5M급 CCD를 사용하였으며 MTF는 140 lp/mm에서 20% 이상을 만족하도록 설계 조건을 설정하였다. 결과: 최적화 설계된 모바일 광각 카메라는 화각 $95^{\circ}$의 full field에서 optical distortion은 모든 field에서 ${\pm}1%$내의 결과를 보였으며 TV distortion도 0.46%로 주변부 상의 왜곡이 감소되었다. MTF 성능은 모든 field에서 20%이상으로 나타났다. 광선수차와 비점수차 모두 적은 양으로 안정된 성능을 보였다. 결론: 기존의 모바일 카메라의 화각보다 더 큰 화각을 갖는 광각의 모바일 카메라의 distortion을 광학적으로 개선하여 주변부의 상의 왜곡을 감소시켜 보다 쾌적한 넓은 시야를 얻을 수 있었으며 소프트웨어로 보정할 때 발생하는 단점을 보완할 수 있었다. 이는 안경과 접목되는 카메라의 연구에 활용될 수 있으리라 사료된다.

초고속 광 가입자망 구축을 위한 PN 부호와 FBG를 이용한 광 CDMA의 특성분석 (The characteristics of optical CDMA systems using PN codes and FBGs for ultra-fast optical access networks)

  • 김봉규;연영희;김병휘;박상조
    • 한국광학회지
    • /
    • 제13권6호
    • /
    • pp.501-505
    • /
    • 2002
  • 본 논문에서는 광 가입자망에서 동시 가입자의 수를 늘이는 방법 중의 하나인 광 CDMA방식에서 PN부호를 사용한 FBG 형광 CDMA에 대하여 광원의 spectral power distortion에 의한 특성변화를 수치적으로 분석하였다. 코드의 길이가 길어질수록 두 채널간의 간섭은 작아지며. 코드길이 만큼의 가입자수가 동시에 사용되기 위하여 광원의 spectral power distortion이 최소 한 15%이내이어야 함을 확인하였다. 그리고 15% 이상의 spectral power distortion에서는 동시 가입자의 수가 급격히 감소함을 알 수 있었다. 즉. PN 부호를 사용한 FBG형 CDMA를 이용하여 초고속 광 가입자망을 구성하는데 있어서 광원의 spectral power distortion이 출력특성에 매우 중요함을 알 수 있었다.

초점길이 및 왜곡수차 측정장치 제작 (Fabrication of the focal length and distortion measurement system)

  • 조현모
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
    • /
    • pp.82-86
    • /
    • 1990
  • A camera type optical bench system equipped with a lens collimator and an image analyzer is fabricated to measure the equivalent focal length and distortion of lenses. This system is automatized by the computer which controls stepping motors. A nodal slide optical bench system equipped with an off axis reflective collimator is fabricated and improved by using rotating arms and air bearing system. distortion measurement on a wide angle lens using the camera method and the nodal slide method is reported. Defocusing error in the distortion measurement with the nodal slide optical bench is analyzed and improved by iteration method to search the correct image point.

  • PDF

Design of a Low Distortion Head-Mounted Display with Freeform Reflective Mirror Based on Two Ellipsoids Structure

  • Wang, Junhua;Liang, Yuechao;Xu, Min
    • Journal of the Optical Society of Korea
    • /
    • 제20권2호
    • /
    • pp.234-238
    • /
    • 2016
  • A new method to design a low distortion, even relative illumination, optical see-through head-mounted display (HMD) with a freeform reflective mirror (FFRM) based on the two similar ellipsoids structure is proposed. The HMD we have realized has a simple structure which consists of two similar ellipsoid surfaces, an FFRM, a 7-piece co-axis relay lens, and an OLED. This structure can be applied to offset distortion, reach even relative illumination, and correct the off-axis aberrations. The HMD we finally have realized has a near 3% low distortion, a higher than 80% relative illumination, and a 40°×30° field of view (FOV).

Analysis of Off-axis Integral Floating System Using Concave Mirror

  • Kim, Young Min;Jung, Kwang-Mo;Min, Sung-Wook
    • Journal of the Optical Society of Korea
    • /
    • 제16권3호
    • /
    • pp.270-276
    • /
    • 2012
  • An off-axis integral floating system using a concave mirror is analyzed to resolve the image distortion incurred by the off-axis optical arrangement. The concave mirror can be adopted as the floating device to improve the optical efficiency. The image distortion due to the tilting axis of the concave mirror needs to be analyzed precisely to generate the pre-distortion image. In this paper, we calculate the image deformation in the off-axis structure of the concave mirror using the geometrical optics. Using the calculation results, the compensated elemental image can be generated for the pre-distortion integrated image, which can be projected to the floating 3D image without image distortion. The basic experiments of the off-axis integral floating are presented to prove and verify the proposal.

투사된 영상에 대한 화면 변위 보정에 관한 연구 (Analysis of Correction Displacements of the Projected Distortion Image)

  • 지용석
    • 반도체디스플레이기술학회지
    • /
    • 제20권3호
    • /
    • pp.18-21
    • /
    • 2021
  • This paper analyzes the distortion correction of the in the micro DMD(digital micro mirror device) projector system using 0.25 or less optical throwing distance ratio. The distortion of projected image occurs depending on the performance of the optical lens, the installation location of the projection system, and the tilt of the screen. This study analyzed the physical tilt values influencing of the distortion of projected image, removed the tilt distortion of throwing distance ratio optical lens, and adjusted the distortion image by the simulation of calibration displacements. The results of this study demonstrated within 5% TV distortion reference. Moreover, the correction method reduced the pin-distortion correction of projection system.

Functional Relation Between Signal Distortion and a Figure of Merit for Nonlinear Process in Dispersion-managed Optical Transmission

  • Kim, Sungman
    • Journal of the Optical Society of Korea
    • /
    • 제16권2호
    • /
    • pp.95-100
    • /
    • 2012
  • We show that the minimum EOP (eye-opening penalty) obtained by tunable dispersion compensation is a function of a figure of merit for a nonlinear process, $I_0L_{eff}$, where $I_0$ is the optical intensity and $L_{eff}$ is the effective length of the interaction region. Using this rule, we do not need to conduct nonlinear simulations in all the cases of signal power and transmission length to obtain the signal distortion in dispersion-managed optical transmission. Instead, we need to conduct a simulation in only one case of a signal power and find the functional relation, and then we can obtain the values of the signal distortion in other cases using the discovered functional relation. This technique can reduce the number of nonlinear simulations to less than 10%.

노광 광학계의 왜곡수차 측정에 관한 연구 (Direct Measurement of Distortion of Optical System of Lithography)

  • 주원돈;이지훈;채성민;김혜정;정미숙
    • 한국광학회지
    • /
    • 제23권3호
    • /
    • pp.97-102
    • /
    • 2012
  • 일반적으로 왜곡을 측정하는 방법으로 패턴의 전체 이미지를 분석하여 왜곡을 평가하는 방법을 이용하고 있으나 정확도가 높지 않아 카메라 등의 광학계에 많이 적용되고 있다. 1um이하의 정확도를 요구하는 왜곡수차를 측정하는 방법으로는 고가의 정밀 스테이지를 이용하여 마스크의 이미지 위치를 정확히 측정하는 방법이 주로 이용된다. 본 논문에서는 정확도가 요구되지 않는 매뉴얼 스테이지를 이용하여 왜곡을 정확히 측정하는 방법을 연구 하였다. 주요 아이디어로는 CCD나 CMOS를 이용하여 마스크 이미지를 일부 중첩되도록 분할측정하고 인접중첩영역의 이미지를 통합하여 마스크 이미지 위치를 정확히 계산하는 것이다. 마스크 이미지의 정확한 위치정보를 얻기 위해 Canny Edge Detection 기법을 사용하였으며 이렇게 확보된 위치정보로부터 좌표변환과 최소자승법을 사용하여 정확한 왜곡수차를 계산하는 과정을 연구하였다.

Waveform distortion of the stimulated Brillouin scattering in a single mode optical fiber with Q-switched Nd:YAG laser

  • Lee, Sang-Hun;Cho, Jin-Hang;Kim, Chil-Min
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2008년도 동계학술발표회 논문집
    • /
    • pp.335-336
    • /
    • 2008
  • We observe the distortion of the back scattered Stokes pulse and the complementary distortion of the transmitted pulse by the stimulated Brillouin scattering when a Q-switched Nd:YAG laser pulse injected into a single mode optical fiber. We determine the constant required energy for the SBS by comparing their temporal shapes.

  • PDF

고보 조명 광학계의 이미지 왜곡 보정에 관한 연구 (A Study on Image Distortion Correction for Gobo Lighting Optical System)

  • 김규하;이지환;이창훈;정미숙
    • 한국광학회지
    • /
    • 제34권2호
    • /
    • pp.61-65
    • /
    • 2023
  • 본 논문은 고보 조명 광학계의 image mask에 사전 왜곡을 적용하여, image를 선명하게 조사 및 보정하는 방법을 연구하였다. 고보 조명 광학계의 경우, 일반적으로 기울여 조사되는 경우가 많기 때문에 image에서 상·하 방향의 왜곡이 심하게 발생한다. 이러한 문제점을 해결하기 위해 비례식을 이용해 image의 보정 좌표를 도출하고, 이를 image mask에 적용하여 왜곡을 보정하였다. 그 결과, 기존 image mask를 사용하였을 경우에 비해 왜곡이 64.5% 감소되는 것을 확인하였다.