• Journal of Astronomy and Space Sciences
• /
• 제21권4호
• /
• pp.417-428
• /
• 2004

광시야 망원경 3호기의 광학계 특성을 조사하고 이를 바탕으로 광학계를 조정하였다. 보정렌즈를 쓰기 때문에 필터는 V, R, I로 제한된다. 광시야 망원경 3호기는 초점비가 작기 때문에 광학계의 정렬 상태에 매우 민감하다. 2도${\times}2$도의 시야각 내에서 성상의 RMS 반경을 $8{\mu}m$ 이내로 맞추려면 다음의 조건을 만족해야 한다: 1) 관측기기는 초점면에 대하여 0.05도 이상 기울어지면 안된다. 2) 주경과 보정렌즈의 축간 거리(decenter)를 1mm 이내로 맞추어야 한다. 3) 주경과 보정렌즈 사이를 최적 거리에서 2.3mm 이내로 맞추어야 한다. 광시야 망원경 3호기는 곡률감지법을 이용한 수차 측정법으로 광학계를 조정하고 있으며 마무리 단계에 있다. 현재 대덕전파천문대 옥상에 임시로 설치되어 시스템 정상화와 인공위성 관측을 수행하고 있다.

• 한국인쇄학회지
• /
• 제16권1호
• /
• pp.69-79
• /
• 1998

The type photographic optical system is designed by using numerical method. Initially the paraxial quantites, numerical solutions are found for the system which is free from the Seidel seven aberrations. The final system has f/4 with the half field angle 20$^{\circ}$, and the image size is 36mm with the focal length of 50mm.

• 한국광학회지
• /
• 제6권2호
• /
• pp.93-100
• /
• 1995

3구면경계에서 aplanat 조건을 해석적으로 유도하고 이를 바탕으로 3종의 3차수차가 보정된 3구면 경계의 형태 및 존재영역을 조사하였다. 실상을 맺으면서 aplanat 저건을 만족하는 3구면경계는 유효초점거리가 양수인 경우 PPN, NPP, PNP 형태의 해가 존재하였으며 N은 볼록 거울, P는 오목 거울을 나타낸다. 유효초점거리가 음수인 경우 NPN, NPP, PNP, NNP형의 4종류의 형태가 존재하였다. 3종의 3차수차가 보정된 3구면경계에서 astigmatic aplanat는 실상을 맺는 해가 존재하지 않았다. Flat field aplanat는 PPN, PNP, NPP형태의 해가 존재하였고 distortion free aplanat의 경우는 PPN, PNP, NPN, NPP, NNP형의 해가 존재하였다.

• 천문학회보
• /
• 제46권2호
• /
• pp.55.5-56
• /
• 2021

The optical design of the Linear-Astigmatism-Free Three-Mirror-System (LAF-TMS) for KASI-Deep Rolling Imaging Fast-optics Telescope(K-DRIFT) is presented. LAF-TMS is an all-reflective imaging system consists of three freeform mirrors. Due to its well-corrected aberrations and obstruction-free clear aperture, the LAF-TMS provides a wide field of view with very low scattered lights.

• 대한기계학회논문집A
• /
• 제26권6호
• /
• pp.1194-1202
• /
• 2002

A study on the topology optimization of a multi-spectral camera for space-use is presented. The optimization is carried out under self-weight and polishing pressure loading. A multi-spectral camera for space-use experiences degradation of optical image in the space, which can not be detected on the optical test bench on the earth. An optical surface deformation of a primary mirror, which is a principal component of the camera system, is an important factor affecting the optical performance of the whole camera system. In this study, topology optimization of the primary mirror of the camera is presented. As an objective function, a measure of Strehl ratio is used. Total mass of the primary mirror is given as a constraint to the optimization problem. The sensitivities of the objective function and constraint are calculated by direct differentiation method. Optimization procedure is carried out by an optimality criteria method. For the light-weight primary mirror design, a three dimensional model is treated. As a preliminary example, topology optimization considering a self-weight loading is treated. In the second example, the polishing pressure is also included as a loading in the topology optimization of the mirror. Results of the optimized design topology for the mirror with various mass constraints are presented.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.920-925
• /
• 2001

A study on the topology optimization of a multi-spectral camera for space-use is presented. A multi-spectral camera for space-use experiences degradation of optical image in the space, which can not be detected on the optical test bench on the earth. An optical surface deformation of a primary mirror, which is a principal component of the camera system, under the self-weight loading is an important factor affecting the optical performance of the whole camera system. In this study, topology optimization of the primary mirror of the camera is presented. Total mass of the primary mirror is given as a constraint to the optimization problem. The sensitivities of the objective function and constraint are calculated by direct differentiation method. Optimization procedure is carried out by an optimality criterion method using the sensitivities of the objective function and the constraint. As a preliminary example, topology optimization considering a self-weight loading is treated. For practical use, the polishing pressure is included as a loading in the topology optimization of the primary mirror. Results of the optimized design topology for the primary mirror with varying mass ratios are presented.

• Current Optics and Photonics
• /
• 제7권3호
• /
• pp.273-282
• /
• 2023

This paper presents a new method for redistributing effectively the first orders of each lens element to achromatize and athermalize an optical system, by introducing a novel method for adjusting the slope of an achromatic and athermal line. This line is specified by connecting the housing, equivalent single lens, and aberration-corrected point on a glass map composed of available plastic and glass materials for molding. Thus, if a specific lens is replaced with the material characterized by the chromatic and thermal powers of an aberration-corrected point, we obtain an achromatic and athermal system. First, we identify two materials that yield the minimum and maximum slopes of the line from a housing coordinate, which specifies the slope range of the line spanning the available materials on a glass map. Next, redistributing the optical first orders (optical powers and paraxial ray heights) of lens elements by moving the achromatic and athermal line into the available slope range of materials yields a good achromatic and athermal design. Applying this concept to design a mobile-phone camera lens, we efficiently obtain an achromatic and athermal system with cost-effective material selection, over the specified temperature and waveband ranges.

• Current Optics and Photonics
• /
• 제5권4호
• /
• pp.409-420
• /
• 2021

We propose a method to synthesize a color non-hogel-based computer-generated-hologram (CGH) from light field data of a three-dimensional scene with a hologram pixel pitch shared for all color channels. The non-hogel-based CGH technique generates a continuous wavefront with arbitrary carrier wave from given light field data by interpreting the ray angle in the light field to the spatial frequency of the plane wavefront. The relation between ray angle and spatial frequency is, however, dependent on the wavelength, which leads to different spatial frequency sampling grid in the light field data, resulting in color aberrations in the hologram reconstruction. The proposed method sets a hologram pixel pitch common to all color channels such that the smallest blue diffraction angle covers the field of view of the light field. Then a spatial frequency sampling grid common to all color channels is established by interpolating the light field with the spatial frequency range of the blue wavelength and the sampling interval of the red wavelength. The common hologram pixel pitch and light field spatial frequency sampling grid ensure the synthesis of a color hologram without any color aberrations in the hologram reconstructions, or any loss of information contained in the light field. The proposed method is successfully verified using color light field data of various test or natural 3D scenes.

• 한국광학회지
• /
• 제4권2호
• /
• pp.145-156
• /
• 1993

고화질 프로젝션 TV에서 광학부품들이 가격 및 성능면에서 경쟁력을 갖춘 최적의 시스템을 설정하고, 그로부터 현재 방송규격인 NTSC 및 향후에 시행될 HDTV에 공용적용할 투사렌즈를 설계 개발하였다. 3차 수차가 모두 보정된 초기설계치, 프라스틱 렌즈의 비구면화, 공차 및 제작성을 고려한 최적화 설계, 그리고 온도보상등의 과정을 통해 설계 제작된 렌즈의 구현가능한 화면크기는 40∼55인치, 해상도는 1000TV-line 이상이다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.130-131
• /
• 2000

One of the more promising proposals for guiding and focusing neutral atoms involves dark hollow laser beams. When the frequency of the laser is detuned to the blue of resonance, the dipole force the atoms feel in the light confines them to the dark core where the atoms can be transported with minimal interaction with the light. The ability of the all-light atom guides to transport large number of ultracold atoms for long distances without physical walls leads to the possibility of a versatile tool for atom lithography, atom interferometry, atomic spectroscopy as well as for transporting and manipulating Bose-Einstein condensates. Furthermore since the atoms transported in all-light atom guides do not come into contact with matter, they can in principle be used to transport antimatter as well. The ability to vary the core size of the hollow beam makes the all-light atom guide potentially useful for focusing neutral atoms. The atoms could be focused as tight as the core size of the hollow beam at its waist. This new focusing scheme, called the atom funnel, would not show spherical and chromatic aberrations that conventional harmonic focusing suffers from. (omitted)