• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.3 no.2
• /
• pp.87-90
• /
• 2007

It's important that detect early caries of deciduous and permanent teeth to prevent dental caries and prevserve teeth, especially on proximal surface of deciduous teeth. The reason is that their prominent pulp horn lead to pulp treatment easily due to rapid caries progression. There are conventional exploring, visual inspection and radiographic exam for early caries detection. But, the standard method for diagnosing dental caries is subject and cavitation may be accelerated during exploring procedure. Caries can be diagnosed up to 40% mineral loss with radiograph. $DIFOTI^{(R)}$ (Digital Imaging Fiber-Optic TransIllumination) is diagnostic imaging system for early caries detection using fiber-optic illumination. It is possible that remineralize the tooth surface without tooth preparation and conserve the tooth structure by using $DIFOTI^{(R)}$.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.1 s.94
• /
• pp.3-11
• /
• 2005

For monitoring of the civil and building structure, optical fiber sensors are very convenient. The fiber sensors are very small and do not disturb the structural properties. They also have several merits such as electro-magnetic immunity, long signal transmission, good accuracy and multiplexibility in one sensor line. Strain measurement technologies with fiber optic sensors have been investigated as a part of smart structure. In this paper, we investigated the possibilities of fiber optic sensor application to the monitoring of beam-column joints of structures. We expect that the fiber optic sensors replace electrical strain gauges. The commercial electric strain gauges show good stability and dominate the strain measurement market. However, they lack durability and long term stability for continuous monitoring of the structures. In order to apply the strain gauges, we only have to attach them to the surfaces of the structures. In this paper, we investigate the possibility of using fiber optic Bragg grating sensors to joint structure. The sensors show nice response to the structural behavior of the joint.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.9 s.174
• /
• pp.69-76
• /
• 2005

The laser interferometer system such as HP5529A is one of the most powerful equipment fur measurement of the straightness error in precision stages. The straightness measurement system, HP5529A is composed of a Wollaston prism and a reflector. In this system, the straightness error is defined as relative lateral motion change between the prism and the reflector and computed from optical path difference of two polarized laser beams between these optics. However, rotating motion of the prism or the reflector used as a moving optic causes unwanted straightness error. In this paper, a compensation method is proposed for removing the unwanted straightness error generated by rotating the moving optic and an experiment is carried out for theoretical verification. The result shows that the unwanted straightness error becomes very large when the reflector is used as the moving optic and the distance between the reflector and the prism is far. Therefore, the prism must be generally used as the moving optic instead of the reflector so as to reduce the measurement error. Nevertheless, the measurement error must be compensated because it's not a negligible error if a rotating angle of the prism is large. In case the reflector must be used as the moving optic, which is unavoidable when the squareness error is measured between two axes, this compensation method can be applied and produces a better result.

• Journal of Computing Science and Engineering
• /
• v.8 no.1
• /
• pp.17-24
• /
• 2014

In this paper, we propose a new implementation of a failure detector. The implementation uses a dual model of heartbeat and interaction. First, the heartbeat model is adopted to shorten the detection time, if the detection process does not receive the heartbeat message in the expected time. The interaction model is then used to check the process further. The expected time is calculated using the exponential smoothing method. Exponential smoothing can be used to estimate the next arrival time not only in the random data, but also in the data of linear trends. It is proven that the new detector in the paper can eventually be a perfect detector.

• Journal of Sensor Science and Technology
• /
• v.10 no.3
• /
• pp.163-172
• /
• 2001

Fiber optic BOTDA (Brillouin Optical Time Domain Analysis) sensor was developed to be able to detect intrusion effect through several ten kilometer optical fiber. Fiber optic BOTDA sensor was constructed with 1 laser diode and 2 electro-optic modulators. The intrusion detection experiment was peformed by the strain inducing set-up installed on an optical table to simulating an intrusion effect. In the result of this experiment, the intrusion effect was well detected as the distance resolution of 3 m through the fiber length of about 4.81 km during 1.5 seconds.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.7
• /
• pp.89-93
• /
• 2001

In recent years Fiber optic hydrophone systems have been the focus of much attention in the sonar world. For sonar arrays, a fiber optic approach offers the major benefit of passive multiplexing of large numbers of hydrophones without underwater electronics. This paper describes recent development work covering array construction, opto-electronics development, hydrohpone design and sea trials. And the development of an interferometric mult-channel fiber optic hydrophone system which uses time division multiplexing capable of driving in excess of 32 channel is described. For this, a 12 channel time division multiplexing array has been constructed, and the performance of this system is demonstrated by sea trial.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.5
• /
• pp.1190-1201
• /
• 1995

Photoelastic experiment has been restricted by three significant problems such as the problems of modeling for a complicated body, of development of experimental model material, and of residual stress in photoelastic specimen. The residual stress in photoelastic model materials is caused by molding, cutting and time effects, etc.. Especially, large residual stress exists on the interface of photoelastic model material for bi-material. Small residual stress occurred in the photoelastic model materials is usually neglected in the photoelastic experiments. But the residual stress provides some errors in the results of photoelastic experiments. In this paper, the stress optic law which can be effectively applied to the phtoelastic model materials with residual stress is developed. By using this stress optic law, we can obtain good results from isochromatic fringe patterns of photoelastic experiment specimen in which residual stress are involved. The stress optic law can be applied to obtain good results of photoelastic experiment from composite materials or bimaterials.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.11
• /
• pp.1028-1036
• /
• 2007

A method for measurement and monitoring of mechanical loads in large slender structures such as wind turbine blade and tower is presented based on continuous strain data obtained from distributed fiber optic sensor. An experimental study was carried out on an aluminum cantilever beam. A static load test was performed and the calculated moment from the distributed fiber optic sensor agree well with the actual applied moment. A series of damages was inflicted on the beam, and vibration tests were carried out for each damage case. The estimated natural frequencies from the distributed fiber optic sensor for each damage case are found to compare well with those from a conventional accelerometer and a numerical analysis based on an energy method.

• Journal of the Optical Society of Korea
• /
• v.18 no.4
• /
• pp.335-340
• /
• 2014

Based on Zernike polynomial fitting, we propose an algorithm believed to be new for interferometric measurements of rotationally asymmetric surface deviation of optics. This method tests and calculates each angular surface by choosing specified rotation angles with lowest error. The entire figure can be obtained by superimposing these sub-surfaces. Simulation and experiment studies for verifying the proposed algorithm are presented. The results show that the accuracy of the proposed method is higher than single-rotation algorithm and almost comparable to the rotation-averaging algorithm with fewer rotation measurements. The new algorithm can achieve a balance between the efficiency and accuracy.

• Proceedings of the KIPE Conference
• /
• 2003.07b
• /
• pp.949-952
• /
• 2003

인터넷으로 표현되는 디지털 세상은 빠른 속도로 변하는 삶 전체에 영향을 미치는데, 특히 산업체에서의 업무와 일하는 방식을 바꾼다. 인터넷과 웹 접속 기술은 현재의 업무 과정을 개선하고, 전통적인 제조 기업의 생산성과 관리 효율을 극대화한다 본 논문에서는 이러한 발전 설비의 안정성과 원거리 모니터링의 신뢰성과 PV시스템의 제어에 관한 것이다 그리고 PV시스템의 센서 모니터링 데이터와 간접적인 제어를 설계하였다. 전통적인 모니터링 시스템은 특수한 하드웨어나 소프트웨어에 의존한다 모니터링 시스템의 기본적인 목표는 사용자가 휴대용 단말기를 통해 모니터링과 제어를 할 수 있게 하는 것이다. Labview GUI를 이용하여 설계한 모니터링 시스템은 윈도우 2000을 운영체제로 한 IBM PC를 사용하였고, TCP/IP 프로토콜에 기본을 두었다. 이러한 모니터링 시스템의 이점은 사원의 지출(급여)를 줄이고 지구 어느 곳에서든 발전 시스템을 인공위성을 통하여 모티터링과 제어를 할 수 있다.