• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2019년도 춘계학술대회
• /
• pp.400-402
• /
• 2019

철도 레일의 선로 변경을 위해 사용되는 분기기의 제어를 담당하는 전기선로전환기는 철도시스템 중에서 매우 중요하게 관리되고 있다. 선로전환기의 상태를 확인하기 위해 다양한 유무선 실시간 모니터링 시스템이 사용되고 있으나 센서 또는 네트워크 오류 등으로 인한 오작동 가능성이 존재하고 있다. 본 논문에서는 선로전환기 작동상태를 이중으로 확인하기 위하여 선로전환감시시스템과 CCTV카메라 관제 시스템이 통합된 이중화 감시시스템을 설계하였다. 선로전환감시시스템에서는 전로전환기의 작동상태를 감시, 경보 그리고 네트워크를 통해 전송한다. 그리고 이 정보를 전달받은 CCTV카메라 관제시스템에서는 해당 선로전환기와 분기기의 상태를 촬영하여 관리자에게 전송하도록 하였다. 선로 관리자는 선로전환기용 모니터링 화면을 통해 선로 전환상태를 1차적으로 확인하고 이어서 CCTV카메라 영상을 통해 전환상태를 직접 확인함으로써 선로전환기의 작동에 대한 신뢰성을 향상 시킬 수 있다. 또한 관리를 위한 인력 운용을 안전하고 효율적으로 수행할 수 있게 된다. 이를 통해 선로전환기의 오작동으로 인해 선로 분기기에서 발생되는 선로 이탈사고 예방에 기여될 것으로 기대된다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.249-252
• /
• 2004

The automatic determination of vehicle operation status as well as continuous tracking of vehicle location with intelligent management is one of major elements to achieve the goals. Especially, vehicle operation status can only be analyzed in terms of expert experiences with real-time location data with scheduling information. However the scheduling information of individual vehicle is very difficult to be interpreted immediately because there are hundreds of thousand vehicles are run at the same time in the national wide range workplace. In this paper, we propose the location-based knowledge management system(LKMs) using the active trajectory analysis method with routing and scheduling information to cope with the problems. This system uses an inference technology with dispatching and geographic information to generate the logistics knowledge that can be furnished to the manager in the central vehicle monitoring and controlling center.

• 조명전기설비학회논문지
• /
• 제26권1호
• /
• pp.38-43
• /
• 2012

For safe and stable operations of power plants, it is essential to monitor closely crucial measurement values related to power plant trips. In this paper, an intelligent power plant operating state monitoring technique enabling the operating crew member to monitor conveniently the status of the important measurement values and to perceive almost instantly the significance of the implications of those measurement values is developed. The proposed technique is called a "POST(Plant Operating State Tracking) Chart" technique and provides the foundations in developing an intelligent and integrated power plant operating state monitoring support system called the "P-OASIS"(Plant Operation Assessment and Support Intelligent System). The P-OASIS is applied to a thermal power plant of 500[MW] capacity and exhibited impressive performances.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.213-218
• /
• 2001

VR (Virtual reality) technologies have given engineers the ability to design, test, and evaluate engineering systems in a virtual environment. The virtual plant is the highlight of the application of the VR technology to plant engineering. Plant design, maintenance, control, management, operation are integrated in the virtual plant. The VR monitoring system including the concept of the virtual plant is developed to replace a current control room that has number of gages and warning lamps in two-dimensional panels which shows the operating status of a plant. The operating status of the plant is displayed in the VR monitoring system through the realistic computer graphics. Sophisticated, realistic and prompt control becomes possible. The VR monitoring system consists of advanced visualization, walk-through simulation and navigation. In the virtual environment, a user can navigate and interact with each component of a plant. In addition, the user can access the information by just clicking interesting component. The VR monitoring system is operated with various modules, such as (1) virtual plant constructed with Graphic Management System (GMS), (2) Touch & Tell System, and (3) Equipment DB System of Part. In order to confirm the usefulness of the VR monitoring system, a pilot gas plant which is currently being used for plant operator training is taken as application. The end of the paper gives an outlook on the future work and a brief conclusion.

• Smart Structures and Systems
• /
• 제26권1호
• /
• pp.11-21
• /
• 2020

The hinge joint is the key to the overall cooperative working performance of the assembled beam bridge, and it is also the weakest part during the service period. This paper proposes a method for monitoring and evaluating the lateral cooperative working performance of fabricated beam bridges based on dynamic strain correlation coefficient indicator. This method is suitable for monitoring and evaluation of hinge joints status between prefabricated girders and overall cooperative working performance of bridge, without interruption of traffic and easy implementation. The remote cloud monitoring and diagnosis system was designed and implemented on a real assembled beam bridge. The algorithms of data preprocessing, online indicator extraction and status diagnosis were given, and the corresponding software platform and scientific computing environment for cloud operation were developed. Through the analysis of real bridge monitoring data, the effectiveness and accuracy of the method are proved and it can be used in the health monitoring system of such bridges.

• 한국멀티미디어학회논문지
• /
• 제4권6호
• /
• pp.570-578
• /
• 2001

경계 주사 구조(Boundary Scan Architecture)기 법은 복잡한 인쇄 회로 기판(PCB : Printed Circuit Board)을 테스트하기 위해 도입되었다. 이러한 경계 주사 구조는 시스템의 정상 동작에 간섭을 주지 않고 시스템의 동작 상태를 실시간 모니터링 하는데 대단한 잠재력을 지니고 있다. 본 논문에서는 경계 주사 구조를 이용하여 시스템의 작동 상태를 실시간으로 모니터 하기 위한 새로운 실장 제어기를 제안하고 설계한다. 제안된 실시간 모니터링 실장 제어기는 경계 주사 구조의 경계 주사 셀 제어기(Test Access Port Controller)와 범용 실장 제어기(Embedded Controller)로 구성되어 있다. 제안된 경계 주사 구조를 이용한 실시간 모니터링 실장제어기는 하드와이어의 자원을 절약해 주고 경계 주사 구조를 지니고 있는 칩에 쉽게 인터페이스 된다. 실험 결과는 제안된 실장제어 기가 시스템의 동작 상태를 실시간 모니터 하는데 호스트 컴퓨터에 의한 모니터 링에 비해 효과적임을 보여준다.

• 드라이브 ㆍ 컨트롤
• /
• 제10권2호
• /
• pp.7-12
• /
• 2013

In this study, a wire/wireless communication system transmitting the operation data of engine from the ER (Engine Room) to the engine controller of ECR(Engine Control Room) has been developed through the communication of ISM(Industrial Science Medical) Band for the test operation environment improvement of medium speed engine. This wire/wireless communication system is composed of the RTU (Remote Terminal Unit) gathering and transmitting engine data as well as the MCU (Master Control Unit) receiving engine status information from the RTU to be sent to the engine controller (PLC). Through this study, a trial product of RTU and MCU has been manufactured. A test bench that has made temperature, pressure and pick-up sensor into a module for the local test of prototype was produced a test bench. In addition, at the same time save the data to a Web server and the smart phone real-time monitoring system has been developed using Wi-Fi communications. The ultimate objective of this study is to develop a wireless smart phone monitoring system of engine for the operator of engine to be able to monitor and control engine status even from the outside of engine room and control room based on this study.

• 한국정밀공학회지
• /
• 제30권5호
• /
• pp.480-485
• /
• 2013

Enhancing energy efficiency of machine tools causes substantial impacts on the manufacturing industries, to cope with the competitive introduction of the total energy management strategies. Real-time energy monitoring is essential to identify energy consumption patterns of the machine tools and correlate them with the energy management strategy. Integrated analysis of machine tool's operation status and the corresponding energy usage is most important to accurately evaluate the energy efficiency under the various machining process environments. This paper proposes a system architecture to realize the online energy monitoring system and the embedded energy monitoring approach interconnected with the CNC kernel. The shop-floor operation management system is presented to integrate the proposed online energy monitoring approach.

• 한국임상약학회지
• /
• 제26권2호
• /
• pp.181-186
• /
• 2016

Background: There has been on increasing emphasis on the importance of monitoring the safety of participants in a clinical trial to protect patients and maintain the integrity of the trial. The independent data monitoring committee (IDMC) has become common component of randomized clinical trials in recent years. Methods: It is important to consider the implications of different approaches that are being used in various countries. IDMC guidelines in Korea, US, and Europe were reviewed and compared to provide the objective, composition and operation of IDMC in detail. Results: IDMC is a group of experts in related subject are as who perform interim data monitoring to make a recommendation to the sponsor or organizer regarding appropriateness of trial continuation and the need for modifications of the trial. Independence of IDMC is preferred in order to minimize influence of factors unrelated to scientific, medical and ethical considerations that should underlie decision-making. Conclusion: IDMC has become an increasingly important component of clinical trials in recent years. Practical operating procedures need to be developed considering the future regulatory status of data monitoring committees.

• 대한기계학회논문집
• /
• 제16권1호
• /
• pp.156-161
• /
• 1992

본 연구에서는 이송축 직류 서보 모터의 전류신호와 NC정보를 이용해서 선삭 가공상태를 감시하는 시스템을 개발하였다. 모터 전류는 가공 부하의 상태를 잘 나 타내며, NC 장치에 내장되어 있기 때문에 신호 검출을 위한 별도의 센서가 필요 없어 서 공구가 수시로 바뀌는 NC작업 감시를 위한 유효한 신호이다. 또 NC 정보로부터 작업을 예측함으로써 감시 대상을 명확히 하고 신뢰성을 높이고자 하였다. 전체적인 감시 시스템의 프로그래밍 언어로는 C를 사용하여, 실시간 감시처리를 가능하게 하였 다.