• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.371-377
• /
• 2018

Navigational equipment standardization mode is a function which is used to standardize key functions, screen display and operation method of major navigation equipment. This is aimed towards to quickly and accurately checking information relevant for safe navigation. Currently, the International Maritime Organization is working on the development of guidelines for the application of navigational equipment in the standardized mode to the task of NCSR Sub-Committee. This study was conducted to investigate users' opinions and preferences in the application of standardization modes and to reflect them in the development of guidelines. In addition, the test program was designed to investigate user preferences for ECDIS among the navigational equipment, such as the types of information and functions that are necessary or preferentially required to perform navigational duties, and the screen configuration. In the study, 333 preference surveys were conducted in 35 countries using a web - based test program. ECDIS users confirmed the content and screen layout of their preferred ECDIS information when conducting navigation duty. The results of the study are significant as they contribute to the development of effective guidelines by presenting user requirements to be considered in the standardization mode.

• Membrane Journal
• /
• v.31 no.5
• /
• pp.343-350
• /
• 2021

In this study the suction pressure was measured with respect to operational time by submersing the multi-bore capillary membrane module in membrane bioreactor(MBR). The hexagonal shape capillary module which has the nominal pore size of 0.2 ㎛, outer diameter of 6.4 or 4.2 mm was immersed in MLSS 8,000 mg/L active sludge aqueous solution, and confirmed changes with respect to permeation flux and air flow rate. It was operated by the filtration/relaxation(FR), FR with backwashing(FR/BW), and sinusoidal flux continuous operation(SFCO) modes. The suction pressure for the SFCO and FR modes was lower at 30 and 50 L/m²·hr, respectively. In addition, the suction pressure of the module with a small outer diameter was relatively low. The suction pressure of a large outer diameter was greatly increased, but it could be reduced by more than 40% by backwashing.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.875-878
• /
• 2015

In this paper, we propose an intra prediction hardware architecture with less processing time, computations and reduced hardware area for a high performance HEVC encoder. The proposed intra prediction hardware architecture uses common operation units to reduce computational complexity and uses $4{\times}4$ block unit to reduce hardware area. In order to reduce operation time, common operation unit uses one operation unit to generate predicted pixels and filtered pixels in all prediction modes. Intra prediction hardware architecture introduces the $4{\times}4$ PU design processing to reduce the hardware area and uses intemal registers to support $32{\times}32$ PU processmg. The proposed hardware architecture uses ten common operation units which can reduce execution cycles of intra prediction. The proposed Intra prediction hardware architecture is designed using Verilog HDL(Hardware Description Language), and has a total of 41.5k gates in TSMC $0.13{\mu}m$ CMOS standard cell library. At 150MHz, it can support 4K UHD video encoding at 30fps in real time, and operates at a maximum of 200MHz.

• Korean Journal of Comparative Education
• /
• v.27 no.4
• /
• pp.45-71
• /
• 2017

This study was designed to examine the characteristics of Chinese-foreign Cooperation in Running Schools (CFCRS) to draw implications for the introduction and management of curriculum cooperation with foreign universities. For this study, relevant literatures and articles on CFCRS were collected and analyzed. This study summarized the characteristics of CFCRS from the perspectives of the running purpose, cooperation modes, and evaluation and quality management. The results show that the main characteristics of CFCRS are to promote the comprehensive development of China's higher education and cultivate talents for imminent national development by introducing the advanced educational resources and experience, to achieve the purpose of "not studying abroad" through diversified and high-quality co-operation programs, to conduct strict quality management over the introduction and operation stages, and to establish legal grounds by establishing enough relevant policies. Based on the results, this study proposes several areas of improvement such as the introduction and operation of foreign curriculum in Korea to foster global talents, enhancement of the evaluation and management of cooperation programs and institutions with foreign universities, regulation and examination of the foreign university curriculum introduction, and normalization of the curriculum operation through the policy review process and related policies.

• Journal of Energy Engineering
• /
• v.28 no.3
• /
• pp.18-25
• /
• 2019

In this study, in order to solve the problem of the program of calculating code input by experienced users in the power generation, the wide area energy network research group developed the local heating operation analysis program EntPLAN, which can be easily used by anyone, including scalability, with domestic technology. Therefore, the Commission intended to compare the heat sources, heat demand, and the results of operation of the combined heat plant (CHP) on the energy network through simulation with the EnetPLAN and the program A on the market. The results showed that the heat and power output on the energy network of the EnetPLAN and A programs were mostly similar in pattern in the simulation results of the heat supply and the operation method of the accumulator. This enabled the application of the simulation for the various operation modes of the cogeneration facilities existing on the energy network. It is expected that EntPLAN, which was developed with domestic technology, will be easily applied in the field in the future and will present efficient operation simulation results.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.2
• /
• pp.130-135
• /
• 2000

The characteristics of two different modes of perfusion culture, intermittent and continuous bleedings, were investigated by culturing the hybridoma cells producing von Willebrand Factor (vWF) monoclonal antibody (McAb) in a 15 L bioreactor without clogging the filter. Both culture methods exhibited similar profiles of cell density and metabolite concentrations during the culture period at the cell concentration of around 1${\times}$107 cells/mL. When the perfusion rate was increased, the intermittrnt bleeding culture showed problems of ammonia accumulation and decrease of cell viability. The continuous bleeding culture in terms of nutrient consumption and metabolite production kinetics. But the analysis of specific oxygen consumption rate showed that the specific oxygen consumption rate of intermittent bleeding culture was similar to that of exponential growth phase. The continuous bleeding culture showed higher specific oxygen consumption rate of intermittent bleeding culture. finally we proved the possibility of long-term operation of continuous bleeding culture and produced approximately 40 g of vWF McAb in a 15L bioreactor after one-month operation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.12
• /
• pp.44-55
• /
• 2001

MAC(Multiply and ACcumulate) is the core operation of multimedia data processing. Because MAC units implemented on traditional DSP units or embedded processors have latency of three cycles and cannot operate on multiple data simultaneously, then, performances are seriously limited. Many high end general purpose microprocessors have SIMD MAC unit as a functional unit. But these high end MAC units must support pipeline structure for various operation modes and high clock frequency, which makes control logic complex and increases chip area. In this paper, a 64bit SIMD MAC unit for embedded processors is designed. It is implemented to have a latency of one clock cycle to remove pipeline control logics and a minimal area overhead for SIMD support is added to existing Booth multipliers.

• International Journal of Fluid Machinery and Systems
• /
• v.9 no.2
• /
• pp.182-193
• /
• 2016

Introduction of intermittent electricity production systems like wind and solar power to electricity market together with the deregulation of electricity markets resulted in numerous start/stops, load variations and off-design operation of water turbines. Hydraulic turbines suffer from the varying loads exerted on their stationary and rotating parts during load variations since they are not designed for such operating conditions. Investigations on part load operation of single regulated turbines, i.e., Francis and propeller, proved the formation of a rotating vortex rope (RVR) in the draft tube. The RVR induces pressure pulsations in the axial and rotating directions called plunging and rotating modes, respectively. This results in oscillating forces with two different frequencies on the runner blades, bearings and other rotating parts of the turbine. This study investigates the effect of transient operations on the pressure fluctuations exerted on the runner and mechanism of the RVR formation/mitigation. Draft tube and runner blades of the Porjus U9 model, a Kaplan turbine, were equipped with pressure sensors for this purpose. The model was run in off-cam mode during different load variations. The results showed that the transients between the best efficiency point and the high load occurs in a smooth way. However, during transitions to the part load a RVR forms in the draft tube which induces high level of fluctuations with two frequencies on the runner; plunging and rotating mode. Formation of the RVR during the load rejections coincides with sudden pressure change on the runner while its mitigation occurs in a smooth way.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2113-2120
• /
• 2015

This paper presents an integrated receiver to support multimode broadcasting standards such as DVB-T2, DVB-C2, and DVB-S2 in a single platform. The integrated receiver consists of a tuner block, a receiver engine, a frame processor, and an A/V decoder. The receiver engine includes a channel decoding engine and a demodulation engine to perform OFDM and APSK demodulations. The frame processor performs deinterleaving and BB frame decoding functions. The demodulator engine and the frame processor are implemented in two FPGA devices and DSP-based embedded software, respectively. To verify the functionality of the integrated receiver, it is tested in the laboratory. Commercial PC-based modulators are used to generate the DVB-T2, DVB-C2, and DVB-S2 modulated signals. The integrated receiver was tested under various operation modes as specified in the standards such as DVB-T2, DVB-C2, and DVB-S2 and showed successful operation in all the scenarios tested.

• Composites Research
• /
• v.18 no.5
• /
• pp.1-8
• /
• 2005

Among many fabrication methods of composite materials, filament winding is the most effective method for fabricating axis-symmetric structures such as pressure tanks and pipes. Filament wound pressure tanks are under high internal pressure during the operation and it has the complexity in damage mechanisms and failure modes. For this reason, it is necessary to monitor the tank through its operation as well as whole fabrication process. A large number of sensors must be embedded into multi points of the tank from its fabrication step for monitoring the whole tank. Fiber optic sensors, especially fiber Bragg grating(FBG) sensors are widely used for various applications because of good multiplexing capabilities. However, we need to develop the embedding technique of FBG sensors into harsh inner environment of the tank far the successful embedment. In this paper, we studied the embedding technique of a number of FBG sensors into filament wound pressure tanks considering multiplexing.