• 한국지열·수열에너지학회논문집
• /
• 제14권2호
• /
• pp.15-22
• /
• 2018

As heat pump application has been extending to residential, commercial, and industrial fields, the heat pump should have many operation modes. It is required to optimize refrigerant charge amount at all operation modes in order to enhance the annual performance of heat pumps. In this study, the performance analysis of the heat pump which has cooling, heating, cooling-hot water, heating-hot water, and hot water modes was executed with the variation of refrigerant charge amount. As the refrigerant charge amount changed, the maximum COPs of the heat pump at different operation modes were changed within ${\pm}10%$. Therefore, it is highly recommended to select optimum charge amount for the heat pump based on the analysis of annual load for each operation modes.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 춘계학술발표회논문집(2)
• /
• pp.1027-1032
• /
• 1995

To develop operation scenarios of KT-2 tokamak, 3 operation modes(OH, high ${\beta}$ and high bootstrap) deduced from zero dimensional steady-state power balance are examined with TSC(Tokamak Simulation Code) time-dependent transport .ode. Plasma profiles are evaluated self consistently during simulations and plasma shapes are maintained by feedback control on PF coil currents. Simulations show operation modes which are typical of KT-2 expected discharges are compatible with the KT-2 PF system design specifications[1].

• 대한기계학회논문집A
• /
• 제40권11호
• /
• pp.955-962
• /
• 2016

최근 산업 자동화 분야에서는 확장성을 고려한 표준화된 소프트웨어 기반 모션 제어 시스템 개발 방법과 다품종 소량 생산을 위한 다양한 동작 모드 지원에 대한 요구가 증대되고 있는 추세이다. 소프트웨어 기반 모션 시스템은 단일 장비 상에서 다양한 동작 모드 전환이 용이하게 하지만 다중 동작 모드를 쉽게 정의하는 도구와 동작 모드 변경에 대한 표준화된 동작 절차가 정의되어 있지 않은 상태에서 다중 동작 모드를 지원하는 모션 제어시스템을 구성하는 것은 쉽지 않다. 본 논문에서는 PLCopen 표준 호환 모션 블록들을 이용해 다중 동작 모드를 구성하고 모드 변경을 외부에서 구동하기 위한 프로토콜을 포함하는 모션 레시피 개념을 제안한다. 제안된 모션 레시피 개념은 IEC 61131-3 표준 호환 통합개발 환경인 Beremiz의 기능을 확장하여 구현하였으며, 실제 테스트베드 상에서 그 동작을 검증하였다.

• 신재생에너지
• /
• 제2권2호
• /
• pp.23-27
• /
• 2006

The power split hybrid powertrain is considered to be one of the most prospective configuration for the hybrid electric vehicle (HEV). Toyota Prius, representing this type of vehicle, showed outstanding performances in fuel efficiency, emission reduction and acceleration. The excellence is largely due to the fact that it utilizes almost all operation modes of HEV. Those modes include ZEV (Zero Emission Vehicle) driving, idle stop, fuel cut-off, power assist, active charging, regenerative braking and so forth. In this paper, a few of the mode operations were simulated using AVL Cruise. Also, control logics to operate the powertrain in each mode were developed. The states of powertrain components were displayed and analyzed. By controlling the three components (engine, motor and generator), it was possible to run the powertrain in several hybrid operation modes.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.547-550
• /
• 2006

The power split hybrid power train is considered to be one of the most prospective configuration for the hybrid electric vehicle (HEV). Toyota Prius, representing this type of vehicle, showed outstanding performances in fuel efficiency, emission reduction and acceleration. The excellence is largely due to the fact that it utilizes almost all operation modes of HEV. Those modes include ZEV (Zero Emission Vehicle) driving, idle stop, fuel cut-off, power assist, active charging, regenerative braking and so forth. In this paper, a few of the mode operations were simulated using AVL Cruise. Also, control logics to operate the powertrain in each mode were developed. The states of powertrain components were displayed and analyzed. By controlling the three components (engine, motor and generator), it was possible to run the powertrain in several hybrid operation modes.

• 정보보호학회논문지
• /
• 제16권1호
• /
• pp.79-85
• /
• 2006

일반적으로 블록암호를 이용한 암호화는 블록암호의 입력에 맞추기 위해 메시지의 마지막에 적당한 값을 패딩한다. 만약 공격자에게 평문의 패딩이 옳은지 아닌지의 여부를 판단하는 오라클이 있다면 임의의 암호문에 대응하는 평문을 찾는 공격을 패딩 오라클 공격이라 한다. 본 논문에서는 다양한 패딩 방법을 사용하는 블록암호의 이중 모드와 삼중 모드에 대해 이 공격을 수행한다. 이러한 안전성 분석 결과, 공격자가 패딩 오라클을 사용할 수 있다면 36개의 이중 모드들 중 12개, 216개의 삼중 모드들 중 22개가 패딩 오라클 공격에 취약함을 알 수 있었다. 이는 이중 모드와 삼중 모드들은 단일 모드만큼의 안전성 밖에 제시하지 못한다는 사실을 나타낸다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권7호
• /
• pp.3608-3628
• /
• 2017

Several block cipher modes of operation have been proposed in the literature to protect sensitive information. However, different security analysis models have been presented for attacking them. The analysis indicated that most of the current modes of operation are vulnerable to several attacks such as known plaintext and chosen plaintext/cipher-text attacks. Therefore, this paper proposes a secure block cipher mode of operation to thwart such attacks. In general, the proposed mode combines one-time chain keys with each plaintext before its encryption. The challenge of the proposed mode is the generation of the chain keys. The proposed mode employs the logistic map together with a nonce to dynamically generate a unique set of chain keys for every plaintext. Utilizing the logistic map assures the dynamic behavior while employing the nonce guarantees the uniqueness of the chain keys even if the same message is encrypted again. In this way, the proposed mode called SPCBC can resist the most powerful attacks including the known plaintext and chosen plaintext/cipher-text attacks. In addition, the SPCBC mode improves encryption time performance through supporting parallelized implementation. Finally, the security analysis and experimental results demonstrate that the proposed mode is robust compared to the current modes of operation.

• Nuclear Engineering and Technology
• /
• 제53권9호
• /
• pp.2859-2865
• /
• 2021

One of the important issues raised from the Fukushima-Daiichi accident is the safety of multi-unit sites when simultaneous accidents occur at the site and recently a multi-unit PSA methodology is being developed worldwide. Since all operation modes of the plant should be considered in the multi-unit PSA, the accident analysis needs to be performed for shutdown operation modes, too. In this study, a station blackout during the mid-loop operation is selected as a reference scenario. The overall accident progression for the mid-loop operation is slower than that for the full-power operation because the residual heat per mass of coolant is about 6 times lower than that in the mid-loop scenario. Though the fractions of Cs released from the core to the RCS in both operation modes are almost the same, the amount of Cs delivered to the containment atmosphere is quite different due to the chemisorption in the RCS. While 45.5% of the initial inventory is chemisorbed on the RCS surfaces during the full-power operation, only 2.2% during the mid-loop operation. The containment remains intact during the mid-loop operation, though 83.9% of Cs is delivered to the containment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.480-483
• /
• 2001

Recent power quality measurement projects report that voltage sags are the most frequent disturbances in the sites [1]-[4]. DVRs were emerged as the best effective and economic solution for this problem [11]. This paper analyzed the power flow of a DVR in distribution grids. This paper showed various operation modes and boundaries such as inductive operation, capacitive operation, and minimal power operation beside the in-phase compensation.

• 대한인간공학회지
• /
• 제5권2호
• /
• pp.3-9
• /
• 1986

The present paper deals with obtaining the proper application criteria for the control mode, by using computer graphic simulation, in order to recover the error effectively occurring in the practical supervisory contol work of hyman-robot system. In these experiments the opteations by human and by control program are performed as control modes for recovering the error. And then we compare and analyze tow control modes taking task error and task time as performance measures and task difficulty as a variable factor. Consequently as the task difficulty increases, the task error in the operation by hyman tends to be less than in the operation by control program and the task time is superior in the operation by control program. Therefore, we suggest that two control modes should be used jointly for recovering the error and the operation by control program should be applied in major fraction of control and the operation by human in minor fraction of control.