• Computers and Concrete
• /
• v.5 no.4
• /
• pp.375-388
• /
• 2008

Crack opening governs many transfer properties that play a pivotal role in durability analyses. Instead of trying to combine continuum and discrete models in computational analyses, it would be attractive to derive from the continuum approach an estimate of crack opening, without considering the explicit description of a discontinuous displacement field in the computational model. This is the prime objective of this contribution. The derivation is based on the comparison between two continuous variables: the distribution if the effective non local strain that controls damage and an analytical distribution of the effective non local variable that derives from a strong discontinuity analysis. Close to complete failure, these distributions should be very close to each other. Their comparison provides two quantities: the displacement jump across the crack [U] and the distance between the two profiles. This distance is an error indicator defining how close the damage distribution is from that corresponding to a crack surrounded by a fracture process zone. It may subsequently serve in continuous/discrete models in order to define the threshold below which the continuum approach is close enough to the discrete one in order to switch descriptions. The estimation of the crack opening is illustrated on a one-dimensional example and the error between the profiles issued from discontinuous and FE analyses is found to be of a few percents close to complete failure.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.26 no.1
• /
• pp.51-58
• /
• 1998

The opening of an event in a given geographical area may be defined as an innovation. Visitors to the event adopt the innovation; therefore, their visitation patterns since the opening can be regarded as a diffusion process. Bass' model of diffusion process was applied to analyzing weekly visitation of Kwang-ju Viennale. Parameters of the Bass' model were estimated by regression analysis, and then reviewed in terms of applicability. Actual estimation of event visitation was implemented by calculation of the three parameters of the model based on the actual data. After comparing estimated value with actual value, it was concluded that Bass' model is applicable to estimating event visitation as far as it is the only prediction method available at this point.

• Nuclear Engineering and Technology
• /
• v.54 no.3
• /
• pp.849-859
• /
• 2022

Feed-water valves (FWVs) are used to regulate the flow rate of water entering steam generators, which are very important devices in nuclear power plants. Due to the working environment of relatively high pressure and temperature, there is strength failure problem of valve body in some cases. Based on the thermo-fluid-solid coupling model, the valve body stress of the feed-water valve in the opening process is investigated. The flow field characteristics inside the valve and temperature change of the valve body with time are studied. The stress analysis of the valve body is carried out considering mechanical stress and thermal stress comprehensively. The results show that the area with relatively high-velocity area moves gradually from the bottom of the cross section to the top of the cross section with the increase of the opening degree. The whole valve body reaches the same temperature of 250 ℃ at the time of 1894 s. The maximum stress of the valve body meets the design requirements by stress assessment. This work can be referred for the design of FWVs and other similar valves.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.1
• /
• pp.5-11
• /
• 2014

The purpose of this paper is to investigate an analytical approach for opening performance evaluation of the nuclear pressure safety valve based on standard codes such as ASME or KEPIC. It is well-known that safety valve is considered as one of pressure relief valves for protecting a boiler or pressure vessel from exceeding the maximum allowable working pressure. When pressure in a container reaches its set pressure, the safety valve commences discharging the internal fluid by a sudden opening called as popping. Safety valve is usually evaluated by set pressure, full open, blow-down, leakage and flow capacity. The test procedure and technical requirement for performance evaluation is described in international code of ASME code such as BPVC. The opening characteristics of steam safety valve can be analyzed by computational fluid dynamics (CFD) and steam shaft dynamics. First, the flow analysis along opening process is simulated by running the CFD models of the ten types of opening steps from 0 to 100%. As a analysis result, the various CFD outputs of flow pattern, pressure, forces on the disc and mass flow at each simulation step is demonstrated. The lift force is calculated by using the forces applied on disc from static pressure and secondary flow. And, the effect of huddle chamber or control chamber is studied by dynamic analysis based on CFD simulation results such as lift force. As a result, dynamics analysis shows opening features according to the sizes of control chamber.

• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.1
• /
• pp.55-81
• /
• 1989

Recently the instantaneous center concept has been to understand the biomechanics by which a tissue derangement causes a mechanical derangement in human joint. Therefore, to understand the biomechanics of temporomandibular joint (T.M.J.) as a part of human joint, it is necessary to clarify the instantaneous center of rotation (I.C.R.) in the mandibular movement. Twenty male subjects without T.M.J. disorder and mandibular deviation during the mandibular movement were selected for this study. The habitual opening and closing paths were recorded on the paper of the sagittal metal plate by two pencil markers connected to the resin open clutch attached on the lower teeth, which was designed for this study. The coordinates of the 33-target points and the 109-anatomical landmarks were obtained using a Summagraphic digitizer connected to a 18AT computer. The original raw data of the opening and closing paths were smoothed by B-spline curve fitting technique and then the I.C.R. pathways were determined mathematically by the computer using algorithm for finding the I.C.R. of a planer rigid body model. Also the opening and closing movements of the mandible were simulated according to the determined I.C.R. The results obtained from this study were as follows. 1. At the early opening and the last closing, I.C.R's were almost distributed around the mastoid process outside the mandibular body without the presence in the region of the mandibular condyle. 2. The I.C.R. pathway showed variable patterns to each subject at the opening and closing movements. 3. The K constant with uniform pattern was obtained by the rotation angle times the radius, which was assumed to the index of the mandibular movement. 4. The opening and closing movements of the mandible were simulated by the I.C.R. pathways at the habitual opening and closing movements. 5. The mandibular condyle was rotated or translated accordng to the relative rotation angle and radius of the determinant factors of K contant.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.3
• /
• pp.63-69
• /
• 2014

This paper studies the strength, fatigue sensitivity, safety factor and lifetimes by means of structural and fatigue analyses of different models of rear doors upon the opening of doors and windows leading to severe fatigue fractures of the window motor components of rear doors. The simulation models were a standard model and other models. The other models, which are denoted here as models I and II, were modified versions of the standard model, with a rib of 3mm and a thickness of 2mm as compared to the standard model. The door was modelled with CATIA V5 and analyzed with the ANSYS program. The material of the rear door was cold rolled steel (DDQ). From the study results, the standard model and model I were confirmed to be less safe upon the opening of the door as compared to the opening of a window in terms of fatigue, but model II was found to be safe for both door and window openings.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.1
• /
• pp.42-47
• /
• 2021

Recently, many structures using lightweight materials have been developed. This study was conducted by using Al6061-T6 and carbon fiber reinforced plastic (CFRP), two common lightweight materials. In addition, the failure characteristics of an interface bonded between a single material and a heterogeneous bonding material were analyzed. The specimens bonded with CFRP and Al6061-T6 were utilized by the combination of the heterogeneous bonding material. The specimens had a double cantilevered shape and the bonding between the materials was achieved by applying a structural adhesive. The experiments were conducted in opening mode: the lower part of the samples was fixed, while their upper part was subjected to a forced displacement of 3 mm/min by using a tensile tester. Under the tested amount of strength, energy release rate, and considering the specimens' fracture characteristics in opening mode, the specimen "CFRP-Al" presented the maximum stress, followed by "Al" and "CFRP". We can hence conclude that the inhomogeneous material "CFRP-Al" is useful for the construction of lightweight structures bonded with structural adhesive.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.48 no.3
• /
• pp.133-148
• /
• 2022

Treatment of mandibular coronoid process hyperplasia (MCPH) has been described and explored in the literature. This systematic review aims to provide a comprehensive overview of the surgical and non-surgical treatment options for MCPH in pediatric and adult populations. Three databases were searched for treatment of MCPH patients (MEDLINE, Embase, and Web of Science). Two reviewers selected case reports and case series based on titles and abstracts. Finally, 55 studies reporting a total of 127 cases were included for qualitative synthesis and data extraction. The mean age at symptom onset was 15.6 years, while the mean age at diagnosis was 23.5 years. Of the included cases, 83.7% were male, and the condition was bilateral in more than 81% of the cases. Coronoidectomy was performed in 82.7% of the included cases, while coronoidotomy was performed in 3.9% of the cases. In 85.0% of the surgically treated cases, the approach was intraoral. The mean maximal intraoperative mouth opening was 38.1 mm compared with 16.5 mm at diagnosis. The mean maximal postoperative mouth opening was 35.3 mm, and the mean follow-up period was 16.3 months. Maximum mouth opening was achieved intraoperatively, and non-surgical treatment after surgery aims to reduce the risk of relapse. Additional research with a higher level of evidence is necessary to confirm these findings.

• Journal of Distribution Science
• /
• v.15 no.8
• /
• pp.65-73
• /
• 2017

Purpose - Although e-learning has this advantage, currently many organizations have failed to recognize the necessity for basic e-learning educational training. It follows that practitioners working in the above organizations face the difficulty of having to find educational training processes of boosting their capabilities by themselves, rather than being able to utilize the educational training processes offered by e-learning. So of their own accord, learners have considered the necessity of information relating to being able to choose between high quality educational training processes. The purpose of this study is to propose opening e-learning content information for enabling an efficient choice of learning processes related to e-learning. Research design, data, and methodology - To pinpoint the items of e-learning content information, the study was initiated according to the following process. First, information relating to e-learning content (offered on e-learning websites) was researched. Second, based on the items of information which emerged from the research, selection and validity verification took place with 5 e-learning specialists as the subjects. Third, the opinions of adult learners at K University were collated relating to the items of information which emerged from the research. Results - The e-learning content information was comprised of 16 items in order to improve the choosing process for learner's e-learning contents. The analysis results showed that when learners were choosing e-learning processes, the most highly considered item was 'mobile support' (4.35). Following this (in order) were 'tuition fees' (4.30), 'certificate issuing' (4.23), and 'awareness of educational institution' (4.18). The least considered items were 'recruiting learners' (3.01) and 'tutor support' (3.18). Conclusions - The 16 items of e-learning content information in this study, were deemed to be helpful to learners in providing them with a choice of desirable e-learning process when this process was offered to them. Following this, there is a need for service institutions offering e-learning processes to make public the information suggested by this study. Research into educational methods additionally points to a necessity for not only e-learning forms, but also offline educational methods and a combination of blended learning to be offered and run parallel to e-learning.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.431-433
• /
• 2007

The drawbeads, which is used for controlling the flow of the sheet by imposing the tension and for preventing the springback in the sheet metal forming process, affects a lot the formability because of the differences in the restraint and opening forces according to the drawbead shapes and dimensions. In this study, the experimental device enabling to measure the drawbead restraining and opening forces was manufactured and the drawing forces of circular, square, and step drawbeads are measured. The drawbead restraining and opening forces of a circular drawbead are increased as its drawbead height is increased. Similarly, those of a square drawbead are increased as its height is increased and shoulder radii decreased. Also, those of a step drawbead are increased as its height and difference in their heights are increased.