• Transactions of Materials Processing
• /
• v.16 no.4 s.94
• /
• pp.293-298
• /
• 2007

Recently, there is a need to produce a large forged part for the flight, shipping, some energies, and military industries, etc. Therefore, an open die forging technique of cast ingots is required to obtain higher quality of large size forged parts. Cogging process is one of the primary stages in many open die forging processes. In the cogging process prior to some open die forging processes, internal cavities have to be eliminated for defect-free. The present work is concerned with the elimination of the internal cavities in large ingots so as to obtain sound products. In this study, hot compression tests were carried out to obtain the flow stress of cast microstructure at different temperature and strain rates. The FEM analysis is performed to investigate the overlap defect of cast ingots during cogging stage. The measured flow stress data were used to simulate the cogging process of cast ingot using the practical material properties. Also the analysis of cavity closure is performed by using the $DEFORM^{TM}-3D$. The calculated results of cavity closure behavior are compared with the measured results before and after cogging, which are scanned by the X-ray scanner. From this result, the criteria for deformation amounts effect on the cavity closure can be investigated by the comparison between practical experiment and numerical analysis.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.2
• /
• pp.157-161
• /
• 2004

The eyes, the saying goes, are the windows of the soul. It's the first thing you notice about a person. Therefore, many people want to possess beautiful eyelids. Surgical formation of a palpebral fold and sulcus divides the lid into two well-defined segments (palpebral and pretarsal), producing the double eyelid desired by many Oriental women as well as an increasing number of man recently. Upper lid blepharoplasty is the Oriental eye is one of the variations of standard upper lid blepharoplasty. In Oriental double eyelid surgery, there have been two approaches to form a superior palpebral fold: the buried suture(nonincision) method and the full external incision method. Conventionally, the nonincision technique has been shown to produce little postoperative edema. However, the probability of the fold disappearing is high, and this technique cannot be performed in patients with fatty eyelids. Conversely, the incision technique has contrary characteristics. Recently, partial incision(or semi-open) technique which is combination of mentioned methods is used, this technique is removal of pretarsal tissue, muscle, and/or orbital fat around 2 or 3 incision site to facilitate tarsus-dermal adhesion. Our method is on the basis of this technique, furthermore, compared with conventional semi-open method, Y(Yang's) needle assisted double eyelid operation is more easy, convenient, saving-time method and provide satisfactory results.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.6
• /
• pp.409-416
• /
• 2020

The research has been conducted to explore the combination of three intangible resources, including social capital, entrepreneurship, and resilience capability on the performance of State Capital Enterprises (SCEs) in Vietnam. Both qualitative and quantitative approaches are applied in the study. An in-depth interview of ten CEOs at SCEs in Vietnam was made to explore new indicators for the contextual latent variables in the research models. By employing the data from the authors' survey of 568 SCEs in Vietnam in 2019, using Cronbach's alpha, confirmatory factor analysis (CFA) and path analysis (SEM), the mechanism that social capital impacts on SCE performance has been analyzed. In addition to the direct role, social capital indirectly affects corporate performance through entrepreneurship and resilience capability. It was found that social capital has a larger impact on entrepreneurship than resilience capacity. However, the contribution of resilience capacity to the firm performance is much more than the entrepreneurship's in Vietnamese context. This study enriches the theory by proposing a measurement scale of the contextual latent variables as a result of in-depth interviews with experts using a qualitative analysis technique. In addition, the path analysis findings suggest practical implications for managers to effectively use their resources in SCEs.

• Journal of Chest Surgery
• /
• v.50 no.6
• /
• pp.467-470
• /
• 2017

Extensive mitral annulus calcifications are considered a contraindication for valve surgery. We describe the case of a 76-year-old female with severe mitral and aortic stenosis associated with extensive calcifications of the heart. The patient underwent an open mitroaortic valve replacement using transcatheter aortic valve implantation with an Edwards SAPIEN XT valve (Edwards Lifesciences Corp., Irvine, CA, USA) in the mitral position. The aortic valve was replaced using a stentless valve prosthesis (LivaNova S OLO; LivaNova PLC, London, UK). Postoperative echocardiography showed that the prosthetic valve was in the correct position and there were no paravalvular leaks. A bailout open transcatheter valve implantation can be considered a safe and effective option in selected cases with an extensively calcified mitral valve.

• Journal of Environmental Science International
• /
• v.20 no.5
• /
• pp.581-587
• /
• 2011

Industrial natural ventilation systems consist of gravity ventilator, the high/low windows and doors. Especially, the high windows play an important role in the industrial natural ventilation systems. Generally speaking, industrial high windows are divided into 3 types; louver type, $45^{\circ}$ open type and $90^{\circ}$ open type. This study was numerically and experimentally conducted. Three types of windows were tested to know the ventilation characteristics and estimate the ventilation efficiencies. Numerically, computational fluid dynamics software (AIR PAK Ver. 2.0) was used to observe the flow characteristics inside the industrial building and the concentration contours generated by the tracer gas method. Experimentally, the flow visualization technique and the tracer gas method were applied with the model building to characterize the flow pattern inside the model building and to estimate the ventilation efficiencies with the different windows. It was found that $90^{\circ}$ open type window was most effective for the discharge of pollutants from the industrial building. On the other hand, the louver type window was found to be less effective than any other windows.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.2 no.3
• /
• pp.139-145
• /
• 2010

In the present study, we conducted resistance test, propeller open water test and self-propulsion test for a ship's resistance and propulsion performance, using computational fluid dynamics techniques, where a Reynolds-averaged Navier-Stokes equations solver was employed. For convenience of mesh generation, unstructured meshes were used in the bow and stern region of a ship, where the hull shape is formed of delicate curved surfaces. On the other hand, structured meshes were generated for the middle part of the hull and the rest of the domain, i.e., the region of relatively simple geometry. To facilitate the rotating propeller for propeller open water test and self-propulsion test, a sliding mesh technique was adopted. Free-surface effects were included by employing the volume of fluid method for multi-phase flows. The computational results were validated by comparing with the existing experimental data.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.6
• /
• pp.2277-2287
• /
• 2015

In recent times, multilevel inverters are given high priority in many large industrial drive applications. However, the reliability of multilevel inverters are mainly affected by the failure of power electronic switches. In this paper, open-switch and short-switch failure of multilevel inverters and its identification using a high performance diagnostic system is discussed. Experimental and simulation studies were carried out on five level cascaded H-Bridge multilevel inverter and its output voltage waveforms were analyzed at different switch fault cases and at different modulation index values. Salient frequency domain features of the output voltage signal were extracted using the discrete wavelet transform multi resolution signal decomposition technique. Real time application of the proposed fault diagnostic system was implemented through the LabVIEW software. Artificial neural network was trained offline using the Matlab software and the resultant network parameters were transferred to LabVIEW real time system. In the proposed system, it is possible to precisely identify the individual faulty switch (may be due to open-switch (or) short-switch failure) of multilevel inverters.

• International Journal of Fluid Machinery and Systems
• /
• v.7 no.4
• /
• pp.174-182
• /
• 2014

The ultimate objective of this study is to develop a water turbine appropriate for low-head open channels to effectively utilize the unused hydropower energy of rivers and agricultural waterways. The application of a cross-flow runner to open channels as an undershot water turbine has been considered and, to this end, a significant simplification was attained by removing the turbine casing. However, the flow field of an undershot cross-flow water turbine possesses free surfaces, and, as a result, the water depth around the runner changes with variation in the rotational speed such that the flow field itself is significantly altered. Thus, clear understanding of the flow fields observed with free surfaces to improve the performance of this turbine is necessary. In this study, the performance of this turbine and the flow field were evaluated through experiments and numerical analysis. The particle image velocimetry technique was used for flow measurements. The experimental results reflecting the performance of this turbine and the flow field were consistent with numerical analysis. In addition, the flow fields at the inlet and outlet regions at the first and second stages of this water turbine were clarified.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.2 s.10
• /
• pp.45-54
• /
• 1997

A mathodology to manage effectively urban open space using GIS(Geographic Information System) was developed to explore the methology of efficient urban open space management focusing on landscaped trees. Cartographic modeling technique was used for practical use of GIS as a case study of the Childeren's park in Kwangju city. First, spatial and attribute information for efficient landscaped tree management was acqired through the development of a tree management cartographic model. Second the information of location and the attribute of individual trees can be applied as a means of decision making in tree management. Thira optimal path of tree management and priority of management in work process of the selected urban open space could be determined according to the objective of park management.

• The Journal of Information Systems
• /
• v.24 no.4
• /
• pp.83-97
• /
• 2015

Purpose: Traditionally, information technology acceptance have been considered one of the most important research issues. However non-acceptance, which was main objective of acceptance theories, have not been included in main research area by communities of information systems. This study is to identify the factors influencing non-acceptance of information technology and suggest a total research model for explaining the phenomena of non-acceptance. Design/methodology/approach: Grounded theory was adopted as a principal research method. which is an inductive technique of interpreting qualitative data about a social phenomenon to build theories about that phenomenon. Data were collected by depth interview and open question on potential non-adopters during 3 months. The collected data were coded by two main coding paradigm in ground theory, open coding and axis coding. Findings: Factors influencing non-acceptance, status quo, imitation, value evaluation, and concerning risk were extracted from open coding. These factors were integrated into system 1 thinking and system 2 thinking, which were from axis coding. More specifically, status quo and imitation are system 1 thinking which are more responsive and emotional thinking and value evaluation and concerning risk are system 2 thinking which are more rational and reasoning thinking.