• 설비공학논문집
• /
• 제13권1호
• /
• pp.30-37
• /
• 2001

The purpose of this study is to present the method to determine the optimal stop time of HVAC using Artificial Neural Network model, one of the learning methods. For this, the performance of determining the stop time of HVAC for unexperienced learning data was evaluated, and time interval for measurement of input data and permissible error needed for practical application of ANN model were presented using the results of daily simulation.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제13권1호
• /
• pp.22-30
• /
• 2005

The purpose of this study is to present a method to determine the optimal stop time of HVAC using the Artificial Neural Network model, which is one of the learning methods. For this, the performance of determining the stop time of HVAC for unexperienced learning data was evaluated, and time interval for measurement of input data and permissible error needed for practical application of ANN model were presented using the results from daily simulation.

• ETRI Journal
• /
• 제32권5호
• /
• pp.827-830
• /
• 2010

For an adaptive cruise control (ACC) stop-and-go system in automotive applications, three radar sensors are needed because two 24 GHz short range radars are used for object detection in an adjacent lane, and one 77 GHz long-range radar is used for object detection in the center lane. In this letter, we propose a single sensor-based 24 GHz radar with a detection capability of up to 150 m and ${\pm}30^{\circ}$ for an ACC stop-and-go system. The developed radar is highly integrated with a high gain patch antenna, four channel receivers with GaAs RF ICs, and back-end processing board with subspace based digital beam forming algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1798-1803
• /
• 2003

In this work the dynamic heat transfer occurring in a cable penetration fire stop system built in the firewall of nuclear power plants is three-dimensionally investigated to develop a test-simulator that can be used to verify effectiveness of the sealants. The dynamic heat transfer can be described by a partial differential equation (PDE) and its initial and boundary conditions. For the shake of simplicity PDE is divided into two parts; one corresponding to the heat transfer in the axial direction and the other corresponding to the heat transfer on the vertical layers. Two numerical methods, SOR (Sequential Over-Relaxation) and FEM (Finite Element Method), are implemented to solve these equations respectively. The axial line is discretized, and SOR is applied. Similarly, all the layers are separated into finite elements, where the time and spatial functions are assumed to be of orthogonal collocation state at each element. The heat fluxes on the layers are calculated by FEM. It is shown that the penetration cable influences the temperature distribution of the fire stop system very significantly. The simulation results are shown in the three-dimensional graphics for the understanding of the transient temperature distribution in the fire stop system.

• 전기학회논문지P
• /
• 제63권2호
• /
• pp.89-94
• /
• 2014

Tidal generation has become one of environmentally friendly new and renewable future sources of energy. The Sihwa Tidal Power Plant in South Korea, which was imported from abroad by turnkey type in 2011, connected to the power system in 2012, and is currently under commercial operation. However, leading companies are reluctant to disclose their technologies associated with the control systems and are not cooperative in technology transfers, making it a high priority to develop core technologies in South Korea. In order to develop a start stop control system for tidal generation, this paper presents the optimal algorithm for decision making and prototype of hardware design. First, control systems in tidal power, such as plant operation control, data interfaces between systems, monitoring and control points of the control system, are analyzed. The software development and PC based emulator processes for optimization algorithm processing are described. Finally, verification of the algorithm implementation, hardware platform for start stop control device, and implementation of prototype control system were discussed.

• 조명전기설비학회논문지
• /
• 제28권6호
• /
• pp.106-112
• /
• 2014

Recently, tidal power generation has gained much attention. South Korea's tidal power generation systems were imported from abroad by turnkey type and have being operated. Therefore, for efficient operation and technological independence of a tidal power system, development of core technology is required. This paper deals with the start stop control system of water turbine generator in the tidal power plant, as one of our development project results. Using the SCADA system, the status and operations of water turbine generator in the tidal power plant, as well as simulation for calculation of maximum power were carried out. A small model type of start stop control device was also developed. In addition, the control system in Sihwa tidal power plant was modeled, and the results obtained by the dynamic simulation were given in graphics by 2D simulator.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2003년도 추계학술대회 및 정기총회
• /
• pp.289-292
• /
• 2003

SME's (Small and Medium-sized Enterprises) have limited resources to build information systems on their own. We suggest what government need to do to support SME's, which includes establishing a one-stop service center, outsourcing of public service, and triggering strategy In order for the government support to be effective, it should serve SME's needs continuously and professionally.

• 소음진동
• /
• 제9권4호
• /
• pp.643-651
• /
• 1999

A brief description of the current technology (contact-start-stop) employed in most of today's hard disk drive is presented. The dynamics and head/disk interactions during a start/stop process are very complicated and no one has been able to accurately model the interactions. Thus, the head/disk interface that meets the start/stop durability and stiction requirements are always developed statistically. In arriving at a solution. many sets of statistical tests are run by varying several parameters. such as, the carbon overcoat thickness. lubricant thickness. disk surface roughness, etc. Consequently, the cost associated III developing an interface could be significant since the outcome is difficult to predict. An alternative method known as Load/Unload technology alters the problem set. such that. the start/stop performance can be designed in a predictable manner. Although this techno¬logy offers superior performance and significantly reduces statistical testing time, it also has some potential problems. However. contrary to the CSS technology. most of the problems can be solved by design and not by trial and error. One critical problem is that of head/disk contacts during the loading and unloading processes. These contact can cause disk and slider damage because the contacts are likely to occur at high disk speeds resulting in large friction forces. Use of glass substrate disks also may present problems if not managed correctly. Due to the low thermal conductivity of glass substrates. any head/disk contacts may result in erasure due to frictional heating of the head/disk interface. In spite of these and other potential problems. the advantage with L/UL system is that these events can be understood. analyzed. and solved in a deterministic manner.

• 한국수소및신에너지학회논문집
• /
• 제28권5호
• /
• pp.502-511
• /
• 2017

Design, manufacture and operate the 700W Solid oxide fuel cell system suitable for housing. Except for BOP not produced domestically, most of the domestic BOPs were applied as much as possible. Finally, the system size was 350 liter. System performance was electric efficiency 44.64%, thermal efficiency 40.99%, total efficiency 85.62% at certificate authority. The system was operated for 4,500 hours, this operation time include automatically system on/off, E-stop for emergency stop, load trip for blackout and inverter error. There were that the system on/off were 26 times. System performance remains intact after system on/off.

• Spatial Information Research
• /
• 제19권2호
• /
• pp.65-70
• /
• 2011

홍보우편 서비스의 활성화와 효율적인 마케팅 캠페인을 위해서 GIS 및 시간/공간마이닝을 접목한 홍보우편 시스템을 개발하였다. 이 시스템은 정확한 고객선정을 위해서 순차/주기패턴을 이용한 구매 성향 정보와 RFM 분석 및 군집화 기법을 이용한 라이프스타일 군집 정보를 제공한다. 제안한 홍보우편 시스템을 통해 원청업체는 고객의 요구사항에 맞는 마케팅 캠페인이 가능하며, 온라인상에서 고객 선정, 홍보물 제작 및 배달까지의 "one-stop" 서비스가 가능하다.