• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.784-787
• /
• 2006

Dual-polarized transmission is one of the effective methods to transmit such a high speed data thanks to two independent channel leads to the orthogonal feature between RHCP (Right-Hand Circular Polarization) and LHCP (Left-Hand Circular Polarization). However, in practical case, the transmitted signal by RHCP polarized antenna in satellite can be occurred at the output port of LHCP polarized antenna in ground station, vice versa. XPD (Cross-Polarization Discrimination) is the ratio of the signal level at the output of a receiving antenna that is nominally co-polarized to the transmitting antenna to the output of a receiving antenna of the same gain but nominally orthogonally polarized to the transmitting antenna. In this paper, the detailed estimation of XPD within the interface between satellite and ground station is written and the influence of XPD to link performance is also described.

• 전자공학회논문지D
• /
• 제35D권7호
• /
• pp.9-16
• /
• 1998

The nput impedance of a patch-tupe dipole antenna for GPR is calculated by using the moment methods in case that the surrounding medium is modeled on a multi-layer structure consisting of lossy dielectircs. When the cone-type function equivalent to pulse basis function in employed, one of the double integration can be performed analytically. The remaining integration is excuted numerically in a finite rnage and analytically in asymptotic region. The current distributions and input impedances of those antennas are calculated numerically.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권10호
• /
• pp.492-499
• /
• 2002

This paper presents the method for an estimation of discharge current waveform in short gap discharge by radiated electromagnetic fields. The method of current waveform estimation is to use the one antenna method (single field method) with a measured electric or magnetic field at given field point by a time domain antenna. In order to verify the availability of the estimation theory, the discharge current waveform estimation was performed by one antenna methods using the measured electric fields of Wilson & Ma and compared with experiments. In addition diagnosis technique for power equipments is able to prevent from large accidents by finding signs of tile accidents before they happen. From the results of the estimation of discharge current, we have a possibility for the application of insulation diagnosis technique for power equipments using S$F_6$ gas. From this point of view, this paper simulated discharge progress and partial discharge by using needle-plan electrodes system in S$F_6$, studied the distribution of frequency spectrum of the radiated electromagnetic waves using a biconical antenna and a spectrum analyzer. From the experimental results of this study, according to the consideration of the mutual relation between frequency spectrum of the radiated electromagnetic waves and discharge progress, it was confirmed that detecting Partial discharge and estimating discharge progress in S$F_6$ could be Possible.

• 전기학회논문지
• /
• 제68권1호
• /
• pp.83-89
• /
• 2019

In this paper, beam forming using moving least squares method (MLSM) is studied. In the previous research, the least squares method (LSM), one of the data interpolation methods, was used to determine the desired beam pattern and obtain a beam pattern that minimizes the square of the error with the desired beam pattern. However, LSM has a disadvantage in that the beam pattern can not be formed to satisfy the exact steering angle of the desired beam pattern and the peak sidelobe level (PSLL) condition. To overcome this drawback, MLSM is used for beam forming. In order to verify, the proposed method is applied in beam forming of Bezier platform array antenna which is one of conformal array antenna platform.

• 대한전자공학회논문지TC
• /
• 제37권10호
• /
• pp.37-42
• /
• 2000

마이크로스트립 패치를 이용하여 안테나의 대역을 증가시키는 방법이 꾸준히 연구되고 있다. 본 연구에서 구형 패치를 이용하여 LMDS용 안테나를 설계하기 위하여 패치의 구조를 변형시킨 형태로 구형 패치 외부 에 밴드를 설치하여 프린징 효과에 의한 전자계의 외부 발산을 최소화하였으며, 이로 인한 안테나 효율의 증가와 원하는 대역의 안테나의 설계 파라미터 값과 실제 시뮬레이션 결과와의 차를 줄일 수 있는 장점을 갖고 있다. 또한 종래의 적층 패치 안테나구조에 비하여 본 연구에서 제시한 외부 밴드를 갖은 구조의 대역폭이 더 넓어짐을 확인 할 수 있었다.

• 한국통신학회논문지
• /
• 제31권11C호
• /
• pp.1092-1099
• /
• 2006

차세대 무선 통신 시스템은 단일 안테나 시스템보다 큰 채널 용량 이득을 얻기 위하여 다중 송수신 안테나 시스템을 갖는 공간 다중화 기술이 사용될 것이다. 다중 송수신 안테나 시스템에서 안테나의 수가 많을 경우 하드웨어 부품의 추가에 따른 비용과 이들을 연산하기 위한 알고리듬 등의 신호 처리 계산을 줄이기 위한 방법으로 효과적인 안테나 선택 기법이 요구될 것이다. 본 논문에서는 채널 용량에 기반을 둔 효과적인 송수신 안테나 선택 기법을 제안하였고, 제안된 방법과 기존의 여러 방법을 모의실험을 통해 비교분석 하였다. 또한 본 논문에서 제안된. 방법이 기존의 여러 송수신 안테나 선택 방법보다 최적의 성능에 더욱 근접함을 확인 할 수 있었다.

• Journal of Positioning, Navigation, and Timing
• /
• 제12권1호
• /
• pp.83-89
• /
• 2023

The Korea Augmentation Satellite System (KASS) system is a Satellite Based Augmentation System (SBAS) under development to provide APV-I SBAS service in the Republic of Korea. The KASS ground segment generates correction and integrity information for GPS measurements of KASS users using the accurate positions of KASS Reference Station (KRS) antenna phase centers. For this reason, the accuracy of KRS reference points through geodetic survey campaigns is one of the important factors for providing the KASS service in compliance with the required navigation performance. In order to obtain accurate positions, two geodetic survey campaigns were performed at several reference points, such as Mark, Center of Mast at Ground Level (CMGL), and Center of Hole in Top Plate (CHTP), of each KRS site using three different survey methods, the Virtual Reference Station (VRS), Flächen Korrektur Parameter (FKP), and raw data post-processing methods. By comparing and analyzing the results, the computed coordinates of the reference points were verified and Antenna Phase Center (APC) positions were calculated using KRS Antenna Reference Point (ARP) data, and the first KASS Site Acceptance Test (SAT#1) was performed successfully using the verified APC coordinates. After the first site survey activities, the KASS operators should maintain the coordinates with the required performance such that the overall KASS navigation performance commitment is guaranteed during the lifetime of 15 years. Therefore, the maintenance plan for the KRS antenna coordinates should be developed before the commissioning of KASS operation planned after 2023. Therefore, this paper presents a geodetic survey method selected for the maintenance activities and provides the rationale for using this method.

• International Journal of Aeronautical and Space Sciences
• /
• 제13권2호
• /
• pp.250-259
• /
• 2012

The need for position information in indoor environments has been growing lately. Several indoor navigation systems have been studied. Among them, pseudolite-based indoor positioning systems are one of the best systems to obtain precise position measurements. However, the installation of such systems is very difficult because the calibration of pseudolite antenna position is complicated. For precise calibration, the use of carrier phase measurements is necessary, and whenever carrier phase measurements are considered, problems with cycle ambiguity appear. In this paper, a new approach to calibrate the positions of pseudolite antennas is proposed. By using a multi-antenna, the ambiguity can be eliminated, epoch by epoch, for every single carrier phase measurement. Moreover, the number of calibration points can be reduced down to 3 by use of measurements collected at unknown positions. Using the proposed methods, the process of the collection of carrier phase measurements becomes considerably simple and convenient. Simulation results are presented to verify the proposed algorithms.

• 한국전자파학회논문지
• /
• 제11권2호
• /
• pp.259-267
• /
• 2000

본 논문에서는 미소 간극에서 방전이 일어날 때 발생하는 방사 전자파를 측정하여 이로부터 방전전류의 파형 을 추정하는 방법에 관하여 검토하고 있다. 시간영역 전자계 측정용 안테나를 사용하여 적절한 위치에서 관측한 측정 전계 또는 측정 자계로부터 방전전류를 추정하는 1 안테나 법(단일 전자계 법)과 2 안테나 법(복수 전자계 법)을 제시하고, 측정된 전계를 이용하여 1 안테나 법 및 2 안테나 법에 의한 방전전류의 파형을 추정(복원)하 고 였다. 추정된 방전 전류파형은 Wilson & Ma의 방전 전류 측정 결과와도 비교하여 본 논문에서 제시한 2가지 추정볍 이론의 타당성을 확인하고 있다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.555-559
• /
• 2003

Recently, in accordance with the commercialization of novel radio frequency utilization technologies, the radiated power must be rigorously limited for the purpose of protection of wireless facilities against frequency jamming or interference and for maintaining the quality of communication service. At present, the output power is measured from the conducted power for the domestic measurement criterion but is not a real radiated power and inaccurate. So, it is peformed to survey the more precisely accurate measurement scheme and analyze its criterion and methodology in comparison with foreign one. As a result of surveying and analyzing, it is concluded that the U.S. and E.U. is actually using the measurement method in consideration of terms of the Equivalent Isotropic Radiated Power(EIRP) and Effective Radiated power(ERP). In case of the frequency below 1 GHz, the half wave-length dipole antenna is used to measure the ERP and above 1 GHz the horn antenna as a reference antenna is used to measure the EIRP. Therefore, for the domestic purpose it is also necessary to take EIRP and ERP into consideration as a measurement criterion in order to make an accurate measurement and regulation.