• 한국균학회소식:학술대회논문집
• /
• 2009.10a
• /
• pp.3-13
• /
• 2009

90 wild Agaricus strains from China, including 44 Agaricus bisporus strains identified preliminarily by isozyme electrophoresis, were studied by the techniques of SRAP and ISSR. 18 special SRAP bands and 12 special ISSR bands were analyzed, the strains were clustered and a demdrogram was obtained. The results showed that the strains were divided into 2 groups, wild A. bisporus group and the other Agaricus group. It is similar to the result of isozyme electrophoresis. 41 wild A. bisporus strains from Sichuan and Tibet were divided into 4 groups based on their growing places, suggesting the regionally difference of the strains to be quite obvious. Some white wild A. bisporus strains from Xinjiang and Tibet had special patterns, resulting in lower coefficient values with other wild A. bisporus strains. The biological characteristics of three wild A. bisporus strains were analyzed, and the results showed: 1. The wild strains grew slowly on PDA medium with weak appressed mycelia, and grew normally in kernel or fermented cottonseed shell substrate. 2. They grew faster than control strain As2796 under lower temperature of $16^{\circ}C$, and higher temperature of $32^{\circ}C$, with optimum growing temperature of $20-24^{\circ}C$, which was $4^{\circ}C$ lower than that of control strain. 3. In the cultivation with manure compost via twice fermentation, the mycelia grew normally in compost and quite slowly in casing soil, and the fruitbodies occurred less and late with easily opening and low production. 4. The fruitbody was off-white with flat and scaled cap, long stipe and dark gill. The bisporus basidia occupied 70-80% and trisporus basidia 20-30% of the total basidia. 5. Heterokaryotic monospore isolates could fruit in cultivation, and the homokaryotic isolates could cross with those derived from overseas wild A.bisporus strains. 6. The electrophoresis phenotype of isozymes such as esterase etc. belonged to high production type (H type). 7. The RAPD patterns made much difference from those of high production, good quality or hybrid strains, which indicated that the wild strains produce a new kind of RAPD type.

• Journal of Bio-Environment Control
• /
• v.16 no.4
• /
• pp.291-296
• /
• 2007

This study was conducted to investigate the effects of horizontal air flow produced by circulation fans on horizontal and vertical profiles of meteorological factors. The three-dimensional distributions of air speed, air temperature, relative humidity and carbon dioxide $(CO_2)$ concentration were measured with and without the fans in operation. The uniformity of the spatial distribution of meteorological factors decreased as the outside air temperature decreased. In "fans off" condition, spatial variations of $4.7^{\circ}C$ in air temperature, 19% in relative humidity were detected. When the fans were operated, these variations were reduced to 2.2 and 6.3%, respectively. As the fan capacity increased, the difference in air temperature among sampling points decreased. The fan capacity of $0.0104m^3{\cdot}s^{-1}{\cdot}m^{-2}$ was enough to obtain a reasonable air flow in greenhouse. The vertical profiles of air temperature and $CO_2$ concentration were reasonably uniform regardless of measurement height and fan capacity. Further researches on the position of fans to reduce the difference in air temperature along the width and the effects of using a larger number of smaller fans are required.

• Journal of Korea Port Economic Association
• /
• v.24 no.3
• /
• pp.147-165
• /
• 2008

Since 2000, e-commerce has been increased continuously in its quantity and quality. The growth of e-commerce has resulted in some diversities of distribution channels, and its characteristics of not-spot trading and limited market scale has urged the on-line market to play a role of assistance to off-line market. e-Commerce causes not only the flow of forward logistics, but also that of reverse logistics with every purchasing, which is a very critical factor to hesitate for consumers to purchase the products as well as increase the price of the products. Concern about the reverse logistics by sellers and buyers influences the level of price and purchasing activity of consumers. This study firstly is to lift the awareness of the efficient control of reverse logistics with reviewing the recent change of logistics environment and phenomena of reverse logistics. Secondly we find the factors generating the reverse logistics and look into its questions, and thirdly offer not only the ways to minimize the phenomena of reverse logistics, but also a efficient control system for reverse logistics. We additionally aim to contribute to prevent the price of the products from rising and raise the customers' satisfaction through minimizing the phase of reverse logistics.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.10
• /
• pp.194-201
• /
• 2012

Moxibustion is utilized not only to cure disease but also to increase immunity. However, it may lead to undesired effects including severe pains(blisters and burns) because of the difficulty of controlling heat intensity. To overcome these problems we developed the RF heat stimulation system which can control stimulus. Also, we developed the RF stimulation protocol for effective heat transfer in subcutaneous tissue of rabbit. RF stimulator consists of a medical RF capacitive heating device, isolation probe, isolation plate, negative pressure control part and temperature measurement part. For the designed stimulus protocol, we measured the temperature distribution on epidermis and in subcutaneous(5mm, 10mm) area of rabbit during moxibustion. A stimulation protocol was designed by controlling the ON/OFF duty ratio, repeating number, and energy of applied pulse to get the temperature distribution similar with that by moxibustion. In results, the correlation coefficients between temperature distribution by moxibustion and that of stimulator were 95% and 91% from 5mm and 10mm thick respectively. However, temperature distribution on epidermis by stimulator was remarkably lower than that of the moxibustion. Finally, the RF stimulation system showed that it can not only transfer effectively heat similar with moxibustion to the subcutaneous area, but also the influence by unwanted side effects can be minimized.

• Korean Journal of Environment and Ecology
• /
• v.29 no.4
• /
• pp.590-598
• /
• 2015

Despite various control methods for pine wilt disease, the disease has been increasing at an alarming rate every year in Korea. Still there is a lack of research on the problems of the current methods used to curb the disease. One main method to control pine wilt disease is fumigation for eliminating the larva of the pine sawyer beetle (Monochamus alternatus) which is known as the vector insect for pine wilt disease. We surveyed and analyzed the amount of destroyed uninfected trees in the fumigated area by studying 32 survey plots ($100m^2$) in Miryang city. The destroyed trees' crown area was estimated by induced regression between root collar area and crown area of the remaining trees (coniferous tree: $R^2=57.4$, deciduous broad-leaved tree: $R^2=63.8$). According to the analysis results, the infected trees (cut trees) were 18.7% and cut trees which were not infected were 35.5% of the total tree population of the study area on the basis of total crown area. In case of pine trees, 8.4% of uninfected trees were cut off but 62% of uninfected deciduous broad-leaved trees including Quercus spp. were affected and damaged during the fumigation process. Since these broad-leaved trees dominate the sub-canopy layer of the forest, this indiscriminate interruption of broad-leaved trees has the adverse effect of depriving the public benefits such as shadow, a cooler weather, controlling humidity, etc.

• Asian Journal of Turfgrass Science
• /
• v.17 no.1
• /
• pp.35-44
• /
• 2003

Popillia quqdriguttata is a serious insect pest in Korean golf courses. The adult feeds on leaves of latifoliate trees and herbaceous plants while the larva feeds on roots of turfgrass. Thus, control of p. quadriguttata adults was tried with registered insecticides in golf courses in Korea. The insecticides used in the experiments were carbaryl + phosalone WP, chlorpyrifos + diflubenzuron WP, chlorpyrifos-methyl EC, deltamethrin EC, etofenprox WP, etofenprox + diazinon WP, etofenprox + tebufenozide EC, fenitrothion EC, imidacloprid SC, pyraclofos WP, and tralomethrin EC. Mortalities of P. quadriguttata were over 95% in carbaryl + phosalone WP, chlorpyrifos + diflubenzuron WP, etofenprox + diazinon WP, and fenitrothion EC at petri dish and in greenhouse. In the field test, corrected mortality of P. quadriguttata was 95.2% and 80.9% in carbaryl 40% +phosalone 20% WP and fenitrothion 50% EC, respectively. Spreading agent enhanced toxic effect of used insecticides to p. quadriguttata adults except carbaryl + phosalon 20% EC. p. quadriguttata adult was firstly observed to feed on leaves of Canna generalis at the Yongwon golf club in Jinhae, Gyeongnam and Prunus ameriaca var. ansu and p. salicina at the Anyang Honest golf club in Gunpo, Cyeonggi. Therefure, host plants off quadriguftata became 29 species of 26 genera in 19 families. Zoysia matreila at the fairway and roughs of Anyang Benest golf club was damaged by p. quadriguttata larvae in Octomber, 2002 and not recovered in April, 2003. Damaged turfgrass became yellowish and wilted and that retarded recovering in the following spring.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.4
• /
• pp.287-293
• /
• 1991

The root-mat formation of infant rice seedlings (8- to 10-day-old) is sometime not enough for machine transplanting because of the too-short nursery period. This experiment was conducted to elucidate the effect of metalaxyl seed-soaking treatment in the mixed solution of metalaxyl, seed disinfectant and insectcides on the root-mat formation of infant rice seedling in machine transplanting. The rice seeds of Odaebyeo were soaked in the mixed solution of metalaxyl, prochloraz and insectcides. with the recommended concentrations for 24 hours at room temperature. Seeding rate was 220g per seed tray (30 x 60 x 3cm). Metalaxyl (25% wettable powder), a fungicide. was used in 1. 000 times dilution as a promoting substance on the root-mat formation. Generally, the metalaxyl-treated seeds markedly increased the root number and length, and rooting activity of infant rice seedlings as compared with the control, thus the root-mat formation was excellent. When the rice seeds were sterilized by the mixed solution of prochloraz and insectcides, metalaxyl could be used together for increasing root-mat rormation of infant rice seedlIngs due to no interaction among agro-chemicals used. Seedling damping-off and physiological seedling rot were also controled in the seedlings of metalaxy-treated seeds. The root-mat of metalxyl-treated seeds had higher hardness and tension than control in terms of physical properties.

• Asia Marketing Journal
• /
• v.15 no.1
• /
• pp.83-105
• /
• 2013

During recent decades, the number of mixed attribute products (henceforth mixed products), which have both utilitarian and hedonic benefits, has increased dramatically. Despite these products' growing popularity, academic research has paid little attention to them, and there remains a gap between theory and the real world. Hence, our study was undertaken to understand consumers' perceptions about and behaviors toward mixed products, as well as factors affecting the evaluation and choice of these products. We divided mixed attribute products into two categories: mixed utilitarian products (utilitarian products adding hedonic attributes) and mixed hedonic products (hedonic products adding utilitarian attributes). We then showed how adding different attributes affects consumers' perception, willingness to pay (WTP), and the choice of mixed attribute products compared to pure utilitarian or pure hedonic products. We conducted an experiment using a within-subject design. A total of 160 office workers and college students participated in the study. The pure utilitarian product used in the study was orange juice, and the mixed utilitarian product was carbonated orange juice. The pure hedonic product was chocolate, and the mixed hedonic product was polyphenol enriched chocolate. Results showed that consumers perceived a mixed utilitarian product to be less utilitarian, less pleasurable and more guilty than a pure utilitarian product. On the other hand, a mixed hedonic product was perceived to be more utilitarian, less pleasurable and less guilty than a pure hedonic product. Also, WTP for a mixed hedonic product was higher than WTP for a pure hedonic product, but WTP was lower for a mixed utilitarian product than for a pure utilitarian product. Furthermore, mixed hedonic products were likely to be evaluated more favorably when they were presented together with pure hedonic products, more so than when they were presented alone. Finally, when compared to low self-control participants, high self-control participants chose mixed hedonic products more frequently. The present study contributes to the existing literature on utilitarian and hedonic consumption by adding to the sparse literature on the consumption of products that have both utilitarian and hedonic purposes. Also, our research findings provide several useful implications for practitioners in related fields. First, the current study provides marketers with a useful guide for understanding consumers' perceptions of these types of products, and helps to predict how adding different attributes influences these products. Second, this study has examined the conditions that may moderate the evaluation and choice of hedonic base products and this finding will serve as a good reference for marketers of mixed hedonic products in marketing communication strategy, in-store marketing and targeting. Specifically, comparative advertising with a pure hedonic product will be beneficial for a mixed hedonic product. Also, displaying mixed hedonic products near pure hedonic products may enhance the effectiveness of in-store marketing of mixed hedonic products.

• Journal of Bio-Environment Control
• /
• v.25 no.2
• /
• pp.89-94
• /
• 2016

This study was conducted to determine the optimum nutrient solution, pH, irrigation interval, light intensity and planting density to growth of common ice plant (Mesembryanthemum crystallinum L.) in a closed-type plant production system. Three-band radiation type fluorescent lamps with a 12-h photoperiod were used. Nutrient film technique systems with three layers were used for the plant growth system. Environmental conditions, such as air temperature, relative humidity and $CO_2$ concentration were controlled by an ON/OFF operation. Treatments were comparison of the nutrient solution of Horticultural Experiment Station in Japan (NHES) and the nutrient solution of Jeju National University (NJNU), pH 6.0 and 7.0, irrigation interval 5 min and 10 min, light intensity 90 and $180{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, and within-row spacing 10 cm, 15 cm, 20 cm and 25 cm with between-row spacing 15 cm. Optimum macronutrients were composed N 7.65, P 0.65, K 4.0, Ca 1.6 and Mg $1.0mM{\cdot}L^{-1}$. There were no significant interactions between pH 6.0 and 7.0 about shoot fresh weight and shoot dry weight of common ice plant. Irrigation interval 5 min and 10 min was also the same result. Shoot fresh weight and shoot dry weight were highest at $180{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$. Shoot fresh weight and shoot dry weight were decreased according to increasing the planting density. From the above results, we concluded that optimum nutrient solution, optimum levels of pH, irrigation interval, light intensity and planting density were 6.0-7.0 and 10 min, $180{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and $15{\times}15cm$, respectively for growth of common ice plant in a closed-type plant production system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1326-1331
• /
• 2006

Weld root gap is a important fact of a falling-off weld quality in various kind of weld defect. The welding quality can be controlled by monitoring important parameters, such as, the Arc voltage, welding current and welding speed during the welding process. Welding systems use either a vision sensor or an Arc sensor, both of which are unable to control these parameters directly. Therefore, it is difficult to obtain necessary bead geometry without automatically controlling the welding parameters through the sensors. In this paper we propose a novel approach using neural networks for detecting and monitoring of weld root gap and bead shape. Through experiments we demonstrate that the proposed system can be used for real welding processes. The results demonstrate that the system can efficiently estimate the weld bead shape and detect the welding defects.