• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.289-291
• /
• 2004

ln this paper, A dc-offset elimination novel algorithm based on an An model is proposed. The algorithm can eliminate dc-offset rapidly than other algorithms. The signal of fault current can be presented as a linear equation combined sinusoidal with exponential signals. Then, the linear equation can be presented an auto-regressive(AR) model and do-offset can be calculated by the equation of AR model. So it is possible to be removed the dc-offset from the original current signal. Performance evaluation of the algorithm was tested on condition that A-phase ground fault on 154kV 25km overhead transmission line.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.533-534
• /
• 2007

This paper investigates impulsive noise from a pole transformer in low voltage distribution system for power line communication. EMI noise from the pole transformer is indicated from the experiment. The noise has certain characteristics because it is caused by partial discharge. The noise level is above -35dBm without a filter. Therefore, the filter which is made of ferrite is used in order to eliminate the noise. the noise filters should be applied to both the phase line and the neutral line. Otherwise, It is likely to have little overall impact on elimination of noises. the performance of filter is verified with various experiments. In conclusion, the equivalent circuit of power line communication including noise source is described as a lumped circuit.

• 제어로봇시스템학회논문지
• /
• 제5권8호
• /
• pp.898-906
• /
• 1999

A control structure is introduced for the purpose of rejecting periodic (or repetitive) disturbances on a tracking system. The objective of the proposed structure is to drive the output of the system to the reference input that will result in perfect following without any changing the inner configuration of the system. The structure includes an adaptation block which learns the dynamics of the periodic disturbance and forces the interferences, caused by disturbances, on the output of the system to be reduced. Since the control structure acquires the dynamics of the disturbance by on-line adaptation, it is possible to generate control signals that reject any slowly varying time-periodic disturbance provided that its amplitude is bounded. The artificial neural network is adopted as the adaptation block. The adaptation is done at an on-line process. For this , the real-time recurrent learning (RTRL) algoritnm is applied to the training of the artificial neural network.

• 한국기계가공학회지
• /
• 제11권4호
• /
• pp.39-45
• /
• 2012

In this paper, process conditions are investigated for elimination of the grain coarsening and improved material flow during forging process by both of experiments and FEM analysis. Particular interest has been given to understand role of preform shape on the grain coarsening behavior and magnitude of the hammer forging load. As the results of FEM simulation by using DEFORM-3D, the simulated forging loads were 2,200ton in the case of a machined bar which is machined from 65mm to 60mm diameter, and below 1,900ton in the case of machined preform, respectively. The use of preform has been beneficial for reduction of the forging load and elimination of the grain coarsening. However, in the case of as received bar and the round bar, which was machined to 2.5mm thickness in surface layer, some degree of local grain coarsening behavior has been observed. The optimized preform shape could be properly designed by applying the FEM simulation.

• 한국의류산업학회지
• /
• 제15권1호
• /
• pp.1-11
• /
• 2013

This study analyzed the expressive characteristics of padding in contemporary fashion. The methodology of this study was quantified through documentaries, fashion collections, and internet news. The results of expressive characteristics and methods were as follow. First, variability showed the creation of dwelling space by air filling, detail mode by zipper, and diversity of recycled filling by zipper pocket. It reflected the pursuit of nomadism and subversion of permanence by change of filling. Second, it was sexual symbolicity that showed the blurred androgynous silhouette by air filling and padding bar design of the chest, stomach, shoulder for the male body silhouette. It emphasized male sexual identity and power through the expression of a modern ideal body. Third, decoration displayed various crafts (such as knitting), various fabric such as polapolis, suedette, corduroy, denim, leather, knit, and spangle. It reflected visual pleasure, scarcity and various interpretations. Fourth, playfulness character forms throug hair filling, unfamiliar fashion items, diversity of silhouette and change of uses. It reflected a pleasant feeling through astonishment and surprise, nostalgia involved in memory and childhood play and disembarrassment from reality. Fifth, simplicity showed the elimination of a sportswear's factor with regular wad quilting, elimination of wad quilting, wad quilting following the structural line of clothes and the structual line of clothes omitted. It reflected disembarrassment from stereotype and an emphasis on essential elements.

• Elastomers and Composites
• /
• 제51권1호
• /
• pp.63-67
• /
• 2016

Poly(ethylene-co-vinyl acetate) (EVA) was pyrolyzed to eliminate acetic acid of VA unit using off-line pyrolysis, and the deacetylated EVA was analyzed infrared spectroscopy (IR) and pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). EVA film for deacetylation was prepared by solution casting on aluminum foil and it was pyrolyzed at low temperature of $300^{\circ}C$ in the off-line pyrolysis apparatus. After deacetylation, carbon-carbon double bond (C=C) was formed by 1,2-elimination of the VA unit in the EVA backbone. Most of C=C bonds were trans-1,4-unit and 1,2-unit was also observed. Presence of the 1,2-unit in deacetylated EVA indicates that terminal or branch VA units exist in the raw EVA. Py-GC/MS chromatogram of deacetylated EVA displayed much smaller acetic acid and much more abundant other pyrolysis products than that of raw EVA, which means that the pyrolysis efficiency and separation condition were improved.

• 한국광학회지
• /
• 제18권2호
• /
• pp.117-121
• /
• 2007

In-line 디지털 홀로그래피가 가지고 있는 가장 근본적인 단점은 실상과 허상 그리고 영차 회절광이 공간적으로 분리 되지 않는 것이다. 본 연구에서는 영차 회절광은 소프트웨어를 이용하여 제거하고, 실상과 허상의 구분은 in-line 홀로그래피 현미경의 기하학적 배치를 이용하여 구분하였다. in-line 홀로그래피 현미경에서 허상의 크기는 대물렌즈와 홀로그램간의 거리에 의존한다. 본 연구에서는 허상의 크기가 대물렌즈의 후방 초점거리와 대물렌즈와 홀로그램 면까지의 거리가 일치할 때 최소가 되는 것을 알았으며, 이를 이용하여 실상과 허상을 구분하였다.

• Bulletin of the Korean Chemical Society
• /
• 제1권1호
• /
• pp.35-39
• /
• 1980

A vacuum ultraviolet photolysis of ethyl bromide was studied in the pressure range of 0.5-19.9 torr and at 123.6 nm krypton resonance line. The pressure effect on the reaction was studied by increasing the reactant pressure and by adding an inert gas, e.g., He. In the observation the monatomic gas is found to be no effect in the reaction. A scavenger effect of the reaction was also performed by adding NO gas as a radical scavenger and was found to be quite efficient to scavenge a radical product $C_2H_6$. The observation of the major reaction product $C_2H_6$ was interpreted in terms of a molecular elimination. Nontheless the decreasing phenomenon of ${\phi}_{C_2H_4}/{\phi}_{C_2H_6}$ with pressure rise was attributed to the existence of the two electronically excited states. One state proceeds to the molecular elimination and the other to carbon-bromine bond fission. The excitation and the decomposition mechanisms between two excited states and the reaction products were interpreted in terms of the first excitation which proceeds the molecular elimination, and the second excitation which resulted from the first excited state by collisional cross over decomposes by carbon-bromine bond fission.

• 전력전자학회논문지
• /
• 제19권5호
• /
• pp.450-456
• /
• 2014

In HVDC converters that employ a line-commutated control, reactive power is absorbed by the rectifier and inverter terminals during AC/DC conversion. An AC filter usually consists of filters and large shunt capacitors to supply reactive power to the HVDC station. When STATCOM is used to supply reactive power to the HVDC system with AC filter, the low-order harmonics generated from STATCOM can result in a resonance between the shunt capacitor and AC network. Therefore, a control strategy based on selective harmonic elimination is adopted to minimize the low-order harmonics from STATCOM. The cancellation of harmonic instabilities is verified through simulations in PSCAD/EMTDC.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.512-515
• /
• 2001

홀터 심전계는 휴대용 소형 심전도 기록기로서 신체에 부착한 후 일상생활을 계속하면서 심장의 운동 및 전위변화를 기록, 분석하여 심장질환의 유무를 판단하는데 유용하게 쓸 수 있으므로 연구가 활발하게 진행되고 있다. 깨끗한 심전도를 얻기 위해서는 심전도(ECG) 신호에 섞여있는 60Hz 전원 잡음, 기저선 변동, 근 잡음을 제거해야 된다. 홀터 심전계에서 심전도 신호를 기록하는데 있어서 가장 큰 문제를 야기하는 부문이 기저선 변동인데 전극을 부착한 부위의 근육수축과 호흡의 리듬에 따라서 발생하게된다. 그러한 기저선은 상하로 심하게 불규칙한 변동을 하면서 흔들리게 되어 심전도 신호를 진단하는데 어려움이 있으므로 기저선 변동을 제거하는 부분이 매우 중요하다. 본 연구에서는 아날로그 단에서 기저선 변동을 안정화하고 실시간으로 신호 처리할 수 있는 디지털 필터를 구현함으로써 기저선 변동을 제거하는 시스템을 설계하여 환자의 심장질환을 분석하는데 응용할 수 있도록 하였다.