• International Journal of Advanced Culture Technology
• /
• v.4 no.4
• /
• pp.81-86
• /
• 2016

In this paper, we propose a simple and effective vision-based tracking controller design for autonomous object tracking using multicopter. The multicopter based automatic tracking system usually unstable when the object moved so the tracking process can't define the object position location exactly that means when the object moves, the system can't track object suddenly along to the direction of objects movement. The system will always looking for the object from the first point or its home position. In this paper, PID control used to improve the stability of tracking system, so that the result object tracking became more stable than before, it can be seen from error of tracking. A computer vision and control strategy is applied to detect a diverse set of moving objects on Raspberry Pi based platform and Software defined PID controller design to control Yaw, Throttle, Pitch of the multicopter in real time. Finally based series of experiment results and concluded that the PID control make the tracking system become more stable in real time.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.4
• /
• pp.1-6
• /
• 2010

We can see the motion blur phenomenon on theedge of the moving picture when it moves in the LCDs. To reduce this phenomenon, we suggested a new over-deriving method, implemented on the board XUP Virtex-2 Pro Development System by using Virtex-2 Pro XUP XC2VP30 and improved the Motion Blur. In this method, we did not use additional parts except for a SDRAM. Hardware implementation for IP and data interface were handled in software. In this paper, we used the moving bar and the moving video image as a design model. We also showed that the afterimage was reduced and the vivid moving images was displayed. through this method.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.479-483
• /
• 1997

In general, motor parameters can be divided into mechanical/electrical parameters and harmonic parameters. Mechanical/electrical parameters identification of motor have been studying systematically for a long time. But, systematical study on harmonic parameters analysis for efficient motor drive system are very poor. The goal of this paper is to propose analyzing method of harmonic parameters for motor drive system with various experimental graphic screens and numerical results and to develope harmonic parameters analyzer. A developed analyzer is made up 586-PC and DSP (digital signal processor) board, motor drive system, power and harmonic parameters analyzing software for windows. Harmonic parameters are analyzed using correlation signal processing techniques based on the correlation between voltage and current waveforms. Analysis results are visualized by 3-D current coordinates, and it is compared and evaluated with conventional time/frequency domain. To verify the validity of the proposed system, 1/4HP capacitor run type single phase induction motor and thyristor speed controller is used for analyzing. Harmonic parameters of motor drive system is analyzed and verified, with varying fire angle of thyristor speed controller, and the proposed approach is to confirm validity.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.447-452
• /
• 2001

An automated system is developed to perform fatigue crack growth tests under constant effective stress intensity factor range ${\Delta}K_{eff}$. In the system, crack length and crack opening load are measured in real-time by using the unloading elastic compliance method. The system consists of two personal computers, an analogue electrical subtraction circuit, a stepping motor, a stepping motor driver, a PIO board, and the application software used to integrate the whole system. The performance of the developed system was tested and discussed performing constant ${\Delta}K_{eff}$ crack growth tests on a CT specimen of 7075-T6 aluminum alloy. The performance of the system is found to be strongly dependent on the accuracy of measurements of crack opening load. Besides constant ${\Delta}K_{eff}$ testing, the system is expected to be successfully applied for automation of various fatigue tests.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05b
• /
• pp.47-53
• /
• 2004

The paper shows that the combination of the hardware, NI PCI 6110E board and the software, Fourier and continuous wavelet transform(CWT) can be used to implement for extracting the important features of the real-time signal. The results confirmed that CWT produces the fast computation enough for the application of the real-time signal processing except the negligible time delay. In denoising case, because of the lack of translation invariance of wavelet basis, traditional wavelet thresholding leads to pseudo-Gibbs phenomena in the vicinity of discontinuities of signal. In this paper, in order to reduce the pseudo-Gibbs phenomena, wavelet coefficients are threshold and reconstruction algorithm is implement through shift-invariant gibbs free denoising algorithm based on wavelet transform footprint. The proposed algorithm can potentially be extended to more general signals like piecewise smooth signals and represents an effective solution to problems like signal denoising.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.2
• /
• pp.126-130
• /
• 2021

The ball grid array is one of the packaging methods that used in high density printed circuit board. Solder void defects caused by voids in the solder ball during the BGA process do not directly affect the reliability of the product, but it may accelerate the aging of the device on the PCB layer or interface surface depending on its size or location. Void inspection is important because it is related in yields with products. The most important process in the optical inspection of solder void is the segmentation process of solder and void. However, there are several segmentation algorithms for the vision inspection, it is impossible to inspect all of images ideally. When X-Ray images with poor contrast and high level of noise become difficult to perform image processing for vision inspection in terms of software programming. This paper suggests the solution to deal with the suggested problem by means of using Mask R-CNN instead of digital image processing algorithm. Mask R-CNN model can be trained with images pre-processed to increase contrast or alleviate noises. With this process, it provides more efficient system about complex object segmentation than conventional system.

• Journal of Fashion Business
• /
• v.27 no.4
• /
• pp.67-87
• /
• 2023

This study analyzed the fashion design features of Iris van Herpen and createdsixdigital fashion designsusing the SCAMPER technique with 3D clothing design software, incorporating a futuristic theme. The research methodology involvedcase analysis and a literature survey. First, the study summarizedthe design style and characteristics of Iris van Herpen. Second, a design concept wasestablished, and a design mood board wascreated. Third, the resulting design features were combined with the SCAMPER technique to incorporate Iris van Herpen's design elements intonew digital fashion designs. Fourth, after discussion with the professor and expert group, six designs were selected for production. They includededgy suit coats, overcoats, asymmetrical hoodies and asymmetrical skirts, irregularly shaped tops, dresses, leggings, jackets,and fishtail skirts. This study provides a reference for the future development of digital fashion designs and showcases the integration of science and technology in fashion design.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.106-106
• /
• 2014

SIGMA (Scientific cubesat with Instrument for Global Magnetic field and rAdiation)는 근 지구공간에서 우주방사선량 측정과 자기장 변화 검출의 과학적 목적과 교육적 목적을 가지고 개발하고 있는 초소형 큐브위성이다. $100mm{\times}100mm{\times}340.5mm$의 크기로 약 3.6 kg의 무게를 가지며, 탑재체는 방사선에 대하여 인체와 동일한 산란 흡수 특성을 가진 Tissue Equivalent Proportional Counter (TEPC)와 자기장 측정을 위한 Magnetometer (Mag)이다. 위성체는 구조계, 자세제어계, 전력계, 명령 및 데이터처리계, 통신계로 구성되어있다. 구조계는 위성의 뼈대인 Chassis와 Mag deployer로 이루어져있고, 위성의 안정적인 자세유지를 목적으로 Attitude Control System (ACS) Board와 Torque Coil이 자세제어계로 구성된다. 전력의 생산과 공급 및 충전은 태양전지판과 Electrical Power System (EPS), 리튬 배터리로 구성된 전력계에서 이뤄지며, 명령 및 데이터처리계는 On Board Computer (OBC)와 Instrument Interface board (IIB)를 중심으로 서브시스템의 명령체계와 데이터처리를 다룬다. 통신계는 Uplink인 VHF 안테나와 Downlink인 UHF, S-band 안테나로 구성되며 지상과 명령을 송수신한다. SIGMA는 타임인터럽트 기능을 활용한 Flight Software (FSW)로 운용되며 임무에 따른 6가지 모드의 시나리오로 위성을 운용한다. 이에 SIGMA의 개발과 테스트 결과를 소개한다. 본 큐브위성 개발기술을 바탕으로 향후 천문관측용 위성에도 활용할 예정이다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.10 s.352
• /
• pp.27-34
• /
• 2006

This paper has implemented a very small($1.4{\times}2.8[Cm^2]$) 13.56[MHz] RFID reader ensuring machine ID recognition correctly in a noise space of Tag-to-Reader within 3Cm. For operation of the RFID system, at first, this paper has designed the loop antenna of a reader and the fading model of back-scattering on microwave propagation following to 13.56[MHz] RFID Air Interface ISO/IEC specification. Secondly, this paper has proposed the automatically path selected RF switching circuit and the firmware operation relationship by measuring and analyzing the very small RFID RF issues. Finally, as a very small reader main body, this paper has shown the DSP board and software functions made for extraction of $1{\sim}2$ machine ID information and error prevention simultaneously with carrying of 13.56[MHz] RFID signals that the international standard specification ISO/IEC 18000-3 defined.

• The Journal of the Korea Contents Association
• /
• v.7 no.12
• /
• pp.245-253
• /
• 2007

In this paper, we propose an effective web service software platform for remote monitoring and control. We removed the servlet container for better web service performance so as to improve the gSOAP processing which is an essential element of web service implementation. Furthermore, we designed the web service server/client software platform which can be applied to robot or ubiquitous sensor applications. For validation of this study we tested it by manufacturing robot hardware for monitoring control which combined tanks and sensors on a LDS4000 engine board mounted with a PXA270 processor. The practical excellence and the efficiency of the result of this study was validated by the comparison of gSOAP message exchange load between the web service client application and the conventional remote monitoring control technique through a web server.