• Journal of the Korean Wood Science and Technology
• /
• 제36권1호
• /
• pp.36-44
• /
• 2008

목조건축물로부터 해체된 고목재를 해당 건축물의 복원이나 새로운 건축물에 재사용하기 위해서는 열화 및 부후 부위를 제외한 건전재의 재질 및 강도성능에 대한 평가가 필요하다. 트러스 현재로 사용된 부재와 사찰에 사용된 부재에 대해 현미경으로 수종식별을 행하고 KS 기준에 따라 각종 물성 및 강도 시험을 행하여 문헌에 의한 결과와 비교 검토하였다. 잎갈나무(Korean larch)는 재질 및 강도 성능이 기존 문헌값보다 높게 나타났으며, 소나무(Korean red pine)와 가문비나무(Yezo spruce)의 경우 해체재의 강도성능이 대체적으로 낮게 나타났다. 육안에 의한 건전부위의 시험편 내의 조직적 열화는 현미경적으로도 관찰되지 않았다. 인장시험편의 중앙부 두께가 5 mm에서 3 mm로 변함에 따라 인장강도가 증가하여 시험편 치수에 대한 검토가 필요한 것으로 판단되었으며, 압축 및 휨 시험법은 현행 기준으로도 적합한 수준이었다. 고목재류에 대한 구체적인 기초 강도 성능평가를 위한 시험방법 및 철물접합부의 접합성능에 대한 차후 연구 검토가 필요한 것으로 평가되었다.

• 임산에너지
• /
• 제25권2호
• /
• pp.1-8
• /
• 2006

안동 봉정사 대웅전의 지붕구조로 사용되었던 해체부재와 새로이 벌채된 소나무재의 물리적, 기계적, 화학적 특성을 평가 분석하였다. 고목재의 해부학적 분석에 의해 만재부위에서 수지의 응고현상을 관찰할 수 있었다. 또한 열화에 의한 비중의 감소, 가도관의 미세할렬이 발생하였으며, 가도관 미세할렬은 S2층 마이크로휘브릴 경사각과 동일한 각도를 갖는 것으로 판단되었다. 고목재의 휨강도, 압축강도 및 전단강도는 모두 35-27% 가량 감소하였으며, 초음파 비파괴시험에 의한 동적탄성계수는 목재의 사용기간이 길어짐에 따라 감소하는 경향을 나타내었다. 목재의 열화는 비중과 동적탄성계수의 측정으로 확인할 수 있었다. 또한 길이방향 동적탄성계수의 측정으로부터 기계적 성능의 예측이 가능하였다. 목재의 부후를 판정할 수 있는 1% NaOH 추출 결과 고목재에서 부후가 많이 진행되었음을 확인하였다. 이에 따라 목재의 열화는 화학조성분의 분석에 의해 평가가 가능할 것으로 판단되었다. 이 연구의 결과는 시간의 경과에 따른 소나무의 물성 변화 분석으로부터 장기적으로 사용하는 목재의 물성 변화를 이해하고 예측을 가능하게 하는 자료의 활용될 수 있을 것이다.

• Journal of the Korean Wood Science and Technology
• /
• 제48권5호
• /
• pp.618-630
• /
• 2020

Muna teakwood, especially from old stands, has been popular as raw material for timber industries in Indonesia for the past ten decades. Due to the scarcity of this wood, superior-grown seedlings of Muna teakwood have been developed and widely planted. Since there is no information on its characteristics, therefore, the aim of this research was to investigate wood characteristics of the 8-year-old superior-grown teak from Muna Island to ensure their proper utilization as raw material for wooden furniture. Wood discs and boards from basal area of three different trees were used as the samples. Macroscopic and microscopic anatomical characteristics were observed following the IAWA's list, while their physical-mechanical properties were measured following British Standard 373-57. Results showed that anatomical characteristics of this wood sample are similar to regular teakwood, but its heartwood portion is higher. Differences among trees are found in regards to wood texture, growth ring width, as well as early and latewood portion. The green moisture content was lower than that of fast-growing teak of a similar age. The wood is more stable than the old teakwood, but its specific gravity is lower. In general, mechanical properties of this wood were higher than those of the regular fast-growing teakwood, but lower than the old one. Based on its specific gravity, this superior Muna teakwood was categorized as a Strength Class of III. The wood is suitable enough for wooden furniture manufacturing.

• Journal of the Korean Wood Science and Technology
• /
• 제10권3호
• /
• pp.168-179
• /
• 1982

The first step to utilize the growing resources of Italian poplar (Populus euramericana I-476) for pulp-Woods, its characteristics and adaptabilities to the pulp industry must be investigated completely. The plantation methods are important for its fast growing in stock, and no less important is the cutting age for its utilization as pulpwood. In this paper, the stone groundwood pulping, refiner groundwood pulping and chemi-groundwood pulping characteristics by the age of tree, along with their physical and chemical characterstics were tested, and relationships between the age groups were analyzed to find out the optimum felling age. The results obtained are as follows: 1. The coefficient of pliability was a little higher in the case of younger trees. 2. The water retention value of each pulp was directly proportional to its physical strength, but this tendency was not detected between the age groups of sample woods. 3. Generally, the physical strength of younger wood pulp was lower regardless of the pulping process. But in the case of pretreatment with NaOH, Asphund and CGP pulp from 5 year old sample wood were stronger in physical strengths than those of GP and Asplund pulp with no pretreatment from 10 years old sample wood. 4. The tear factor of Asplund pulp with alkali pretreatment was higher than that of CGP pulp but the breaking length and the burst factor was similar in all processes. Considering the pulp yield and its brightness, CGP process seems to be advantageous. 5. The dissimilarity of physical strength between 7 and 10 years old wood pulp was not very large in all pulping processes but the physical strength of 5 year old wood pulp was very weak. In the of groundwood pulping from Italian poplar woods, 5 year old wood pulp should be mixed with other long fiber pulp for making a good paper.

• Journal of the Korean Wood Science and Technology
• /
• 제32권4호
• /
• pp.74-81
• /
• 2004

비파괴 시험 방법 중 초음파 방법을 이용하여, 목재의 열화상태를 진단하였다. 기초 자료로서, 목재 내 온도변화에 따른 초음파 전송속도의 변화, 목재 내 함수율변화에 따른 초음파 전송속도 변화, 목재 강제부후에 의한 중량감소와 초음파 전송속도 변화를 검토하였다. 또한 원목의 비파괴 시험 등을 수행하고, 초음파 전송속도에 근거한 부후분포도를 작성하여 고목재의 열화 진단을 하였다. 일련의 시험들을 통하여 비파괴 방법에 의한 목재 열화진단을 위한 데이터를 축적하고, 이를 고목재에 적용하여 목재 내부의 부후분포도를 작성함으로써 금후 고목재의 비파괴 방법에 의한 부후탐지의 가능성을 검토하였다.

• 한국가금학회지
• /
• 제32권2호
• /
• pp.101-106
• /
• 2005

산란노계를 닭고기로서 자원화하여 농가의 수익과 단백질 공급원으로 활용하기 위한 목적으로, 생산성이 낮고 경제적 가치가 적은 산란노계 사료에 목초액을 첨가${\cdot}$급여하여 육질 개선 효과를 조사하기 위하여 계획하였다. 이사브라운 갈색종 240수를 배치하여 대조구에는 육계용 배합사료, 시험 1구에는 국산 목초액 $0.8\%$, 시험 2구에는 외국산 목초액 $0.4\%$를 첨가하여 급여하였다. 사료 섭취량은 대조구가 시험구보다 3g 정도 적었는데 목초액의 유기산이 사료의 소화에 영향을 준 것으로 사려된다. 사육성적의 차이는 국산과 외국산 목초액의 구성성분의 차이에 기인하며, 외국산 목초액의 첨가는 성페르몬과 성분이 유사한 목초액이 내분비 물질의 분비를 촉진한 결과 산란율이 증가하였고, 목초액의 첨가에 따라 조지방 함유량은 다리 고기가 가슴고기보다 많았으며 육색의 개선 효과도 있었다. 다리고기의 육질과 관능검사는 근섬유의 조직을 가늘게 하고 보습력을 증가시키는 외국산 목초액 첨가구에서 좋은 평가를 받았다.

• 펄프종이기술
• /
• 제48권2호
• /
• pp.99-105
• /
• 2016

The increase of wet web solid content after wet press and dry compressive strength were observed in lab study by judicious application of wood flour and starch for the old corrugated container (OCC). Pearl starch was better than cationic starch in strength development, but cationic starch was better for drainage. Application of vacuum on the mixed solution of wood flour and starch helped strength development further without loss of other properties. The effect of wood flour addition on wet web solid content improved as the wet pressing pressure increased. The use of wood flour and starch mixture improved wet web solid contents further.

• 펄프종이기술
• /
• 제31권5호
• /
• pp.12-17
• /
• 1999

This study was to evaluate applications of the alkalophilic enzymes from Coprinus cinereus 2249 with old newsprint(ONP). A enzymatic deinking process based on alkalopholic enzymes was investigated . It was found that alkalophilic enzymes could effectively deink old newsprint. When applied on deinking of the old newsprint, it increases the freeness and brightness due to effect of hydrolysis at 0.1% enzyme concentration . Also, the physical properties of deinked pulp were improved.

• Journal of the Korean Wood Science and Technology
• /
• 제43권5호
• /
• pp.566-577
• /
• 2015

White Jabon (Anthocephalus cadamba Miq.) is one of the fast growing species in Indonesia and has the potential as the raw material for pulp and paper. In this research, 3, 5, and 7 years old White Jabon woods were pulped under different active alkali charge of 15%, 18%, 21%, 24%, and 27%, and its effect on delignification degree, kappa number, pulp yield, pulp viscosity, brightness, unbeaten freeness, and delignification selectivity was investigated. The results showed that tree age and active alkali concentration influenced the quality of pulp and pulping properties, except for that of unbeaten freeness. Delignification degree increased with increasing active alkali charge, and this brought about the decrease of pulp kappa number. The pulping yield tended to decrease below the Klason lignin of approximately 4%. Even though the 3 years old wood resulted in the highest brightness and highest delignification selectivity, the highest pulp viscosity was obtained with the 5 years old wood. The dominant fiber length of all wood ages was in the range of 1.2 - 2.0 mm. The 3 years old wood was considered to be the most promising raw material for kraft pulping in the view point of pulping properties, pulp quality and harvesting rotation.

• Journal of the Korean Wood Science and Technology
• /
• 제42권2호
• /
• pp.193-206
• /
• 2014

Residual performance of old architectural wood which has been damaged was measured using Nondestructive Evaluation (NDE). The wood Pole Tester was used to assess ultrasonic velocity inside wood and drill resistance was determined using an IML-resistograph. For ultrasonic measurements squared timber and circular timber's measurements were separately conducted with 1,300 m/s as the standard ultrasonic velocity. The standard wood samples divided into two parts; a non-sound area (below the standard), and a sound area (above the standard). Furthermore, schematization of wood was compared with results naked eye observation. The drilling resistance test was performed for both length and thickness direction in wood. The internal of the drilling was set at 30 cm (length direction), 5 cm (width direction) and 30cm (thickness direction). A non-sound area was defined as that 1) amplitude is below 20% and 2) carbonization and deterioration are related.