• Journal of Mechanical Science and Technology
• /
• 제18권6호
• /
• pp.1036-1041
• /
• 2004

A newly designed pressure-scanning slit viscometer is developed to combine an optical device without refraction while measuring blood viscosity over a range of shear rates. The capillary tube in a previously designed capillary viscometer was replaced with a transparent slit, which is affordable to mount optical measurement of flowing blood cells. Using a pressure transducer, we measured the change of pressure in a collecting chamber with respect to the time, p(t), from which the viscosity and shear rate were mathematically calculated. For water, standard oil and whole blood, excellent agreement was found between the results from the pressure-scanning slit viscometer and those from a commercially available rotating viscometer. This new viscometer overcomes the drawbacks of the previously designed capillary viscometer in the measuring whole blood viscosity. First, the pressure-scanning slit viscometer can combine an optical instrument such as a microscope. Second, this design is low cost and simple (i.e., ease of operation, no moving parts, and disposable).

• 한국기계가공학회지
• /
• 제11권5호
• /
• pp.88-93
• /
• 2012

This paper describes the machinability of the sintered carbide and tool-die steel(STD-11) by electric discharge drilling with various tubular electrodes which have multi-holes. Various types of electrode which have different diameters and materials are used with the application of continuous direct current and axial electrode feed. Inner part of electrodes are inserted with smaller tubes or Y-channel or bar. In ED-Drilling, the dielectric flushed down the interior of the rotating tube electrode, in order to remove machining debris from the hole. As result of experiments, the bigger the diameter of the electrode is, the lower the material removal rate is. Machinability of copper electrode is higher than that of brass. In machining of sintered carbide, to use oil is better than distilled water as dielectric.

• 한국산업융합학회 논문집
• /
• 제4권4호
• /
• pp.413-418
• /
• 2001

The change of crystalline structure and mechanical properties of drawn PP filaments which was treated by tensioned and non-tensioned annealing was investigated. Measurements were carried out with XRD for crystallite size, density gradient tube for crystallinity. and UTM for mechanical properties. Tensioend and non-tensioned annealing were carried out $80^{\circ}C$, $100^{\circ}C$, $120^{\circ}C$: for 10min., 30min., 60min, in oil bath. It was found that the crystallinity and crystallite size of (110) plane of samples were increased with increasing of annealed temperature and time. Also crystallinity and crystallite size of samples which was tensioned annealing were larger than those of non-tensioned annealed samples. Initial modulus and tensile strength of tensioned annealed samples were higher than non-tensioned annealed samples, But elongation of tensioned annealed samples was lower than non-tensioned annealed samples.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 추계학술대회 논문집
• /
• pp.157-160
• /
• 2008

본 연구에서는 디스크 이동식 폐타이어 열분해 실증 설비(10톤/일)를 설계, 제작 그리고 시운전을 통하여 열분해 설비의 안정적인 연속 운전이 가능함을 확인하였다. 시운전 결과 반응기 내부 온도는 $500{\sim}600^{\circ}C$, 내부 압력은 $-80{\sim}-100mmHg$, 체류시간은 $60{\sim}90min$ 범위에서 안정적인 열분해가 일어났다. 또한 이번 과제 수행을 통해NC 가스의 연소기를 개발 적용하여 NC 가스의 열분해 열원으로 사용 가능성을 확인하였으며, NC 가스 연소 시 대기 측정을 통하여 규제치도 만족함을 확인할 수 있었다. 지금까지 나온 결과는 장기 연속 운전과 scale-up을 위한 기초 자료가 될 것이다.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2003년도 추계정기총회 및 국제심포지엄
• /
• pp.190-195
• /
• 2003

A novel microwave-induced pyrolysis of polystyrene in motor oil was performed using a quartz tube reactor with silicon carbide as the microwave absorbent. Different pyrolysis conditions were investigated, such as time range from 30 minutes to 1 hour and power range from 180 to 250 watt. The distillate components were analyzed with GC-MS, and styrene, 1-methyl styrene, toluene, ethyl benzene were the four main products. Among these, styrene took over 70 percentages. Temperature of the complete pyrolysis using microwave was much lower than that of conventional thermal pyrolysis method.

• Current Research on Agriculture and Life Sciences
• /
• 제9권
• /
• pp.61-69
• /
• 1991

탈지 은행 종실 및 잎에서 유리페놀산, 에스터형 및 불용성 페놀산을 추출하여 식용 옥수수유 기질에서 항산화 효과를 비교하고자 0.02%(w/w)의 BHA, BHT와 각 추출물 $1m{\ell}$(2% w/w)를 넣어 $45{\pm}1^{\circ}C$의 항온기에서 45일간 저장하면서 매 5일 간격으로 과산화물가, TBA가를 측정하여 다음과 같이 항산화 효과를 추정하였다. BHA, BHT와 은행 종실의 유리페놀산, 에스터형 및 활용성 페놀산, 잎의 유리페놀산, 에스터형 및 불용성 페놀산 추출물을 첨가한 시험구와 대조구의 45일 저장후 과산화물가는 각각 133, 52, 115, 190, 127, 95, 140, 121, 280meq/kg, oil이었다. 한편 같은 조건하에서 각 항산화성 물질의 TBA가는 0.153, 0.059, 0.175, 0.260, 0.187, 0.160, 0.1 74, 0.195 0.430이었다. G.C.로 분리 확인된 페놀산은 은행 종실 및 잎 공히 Vanillin, ${\rho}$-Hydroxybenzoic acid, Syringic acid, Gallic acid, Protocatechuic acid가 확인되었고 은행 종실에서는 trans-Cinnamic acid, Caffeic acid가, 잎에서는 Coumaric acid, Gentisic acid, Phloroglucinol, Pyrogallol이 각각 확인되었다. 이상의 결과를 종합해 볼 때 은행 종실 및 잎의 페놀산은 식용 옥수수유 기질에서 우수한 항산화 효과가 있는 것으로 사료된다.

• 대한의용생체공학회:의공학회지
• /
• 제28권6호
• /
• pp.768-776
• /
• 2007

A new type of the fluid circulation blood pressure simulator was proposed to enhance the blood pressure simulator used for the development and evaluation of automatic sphygmomanometers. Various pressure waveform of fluid flowing in the pipe was reproduced by operating the proportional control valve after applying a pressure on the fluid in pressurized oil tank. After that, appropriate fluid was supplied by operating the proportional control valve, which enabled to reproduce various pressure wave of the fluid flowing in the tube. To accomplish this work, the mathematical model was carefully reviewed in cooperating with the proposed simulator. After modeling the driving signal as input signal and the pressure in internal tube as output signal, the simulation on system parameters such as internal volume, cross-section of orifice and supply pressure, which are sensitive to dynamic characteristic of system, was accomplished. System parameters affecting the dynamic characteristic were analyzed in the frequency bandwidth and also reflected to the design of the plant. The performance evaluator of fluid dynamic characteristic using proportional control signal was fabricated on the basis of obtained simulation result. An experimental apparatus was set-up and measurements on the dynamic characteristic, nonlinearity, and rising and falling response was carried out to verify the characteristic of the fluid dynamic model. Controller was designed and thereafter, simulation was performed to control the output signal with respect to the reference input in the fluid dynamic model using the proposed proportional control valve. Hybrid controller combined with an proportional controller and feed-forward controller was fabricated after applying a disturbance observer to the control plant. Comparison of the simulations between the conventional proportional controller and the proposed hybrid simulator indicated that even though the former showed good control performance.

• Current Research on Agriculture and Life Sciences
• /
• 제10권
• /
• pp.11-17
• /
• 1992

탈지 가자박으로 부터 free, soluble 및 insoluble bound phenolic acids를 추출하여 식용대두유 기질에서 항산화효과률 0.02%(w/w)의 BHA, BHT의 항산화 효과와 비교하고자 각 기질과 대조구를 $60{\pm}1^{\circ}C$에서 35일간 저장하면서 매 7일 간격으로 과산화물가, TBA가를 측갱하였다. BHA, BHT와 free, soluble 및 insoluble hound phenolic acids를 첨가한 시험구와 대조구의 과산화물가는 21일의 경우 60, 30, 14, 11, 10, 100이었다. 같은 조건하에서 추출물의 TBA가는 0.150, 0.108, 0.105, 0.073, 0.078, 0.185이었다. 이것으로 보아 phenolic acids는 식용대두유 기질에서 우수한 항산화력을 나타내었다. 분리확인된 phenolic acids는 p-coumaric acid, ferulic acid, phloroglucinol, pyrogallol, vanillic acid, caffeic acid으로 확인되었다.

• 한국자동차공학회논문집
• /
• 제16권3호
• /
• pp.30-37
• /
• 2008

The evaporation pressure drop of $CO_2$ (R-744) in horizontal tubes was investigated experimentally. The experiments were conducted without oil in a closed refrigerant loop which was driven by a magnetic gear pump. The main components of the refrigerant loop are a receiver, a variable-speed pump, a mass flow meter, a pre-heater and evaporator (test section). The test section consists of a smooth, horizontal stainless steel tube of 7.75 and 4.57 mm inner diameter. The experiments were conducted at saturation temperature of $-5^{\circ}C\;to\;5^{\circ}C$, and heat flux of 10 to $40kW/m^2$. The test results showed the evaporation pressure drop of $CO_2$ are highly dependent on the vapor quality, heat flux and saturation temperature. The pressure drop measured during the evaporation process of $CO_2$ increases with increased mass flux, and decreases as the saturation temperature increased. The evaporation pressure drop of $CO_2$ is very lower than that of R-22. In comparison with test results and existing correlations, the best fit of the present experimental data is obtained with the correlation of Choi et al. But existing correlations failed to predict the evaporation pressure drop of $CO_2$. Therefore, it is necessary to develop reliable and accurate predictions determining the evaporation pressure drop of $CO_2$ in a horizontal tube.

• 대한기계학회논문집
• /
• 제13권2호
• /
• pp.236-242
• /
• 1989

본 연구에서는 주로 보일러의 과열기 및 재열기등의 관재료로 널리 사용되고 있는 304 스테인레스강에 대하여 실제 고온부식현상을 재현한 부식환경하인 630.deg. C, 690.deg. C 및 750.deg. C 3가지 온도범위에서 크리프시험을 실시하고 고온부식이 크리프파단 특성에 미치는 영향을 부식조건이 없는 고온대기중의 실험결과와 비교 검토하였다.