• Tribology and Lubricants
• /
• 제34권4호
• /
• pp.138-145
• /
• 2018

Elliptical bearings are widely used for large steam turbines owing to their excellent load carrying capacity and good dynamic stability. Power loss in bearings is an extremely important parameter, especially for high turbine capacities. Optimization of operation conditions and design variables such as bearing clearance and bearing length can reduce the power loss in elliptical bearings. Although changes in the oil supply method have served to increase the efficiency of the tilting pad journal bearing, it has not explicitly improved elliptical bearings. In this study, we verify the static characteristics of an elliptical bearing by changing the direction of oil supply. We evaluate the bearing power loss and bearing metal temperature, and compare the bearing performance and reliability in different test cases. The direction of oil supply is $90^{\circ}$ (9 o'clock) and $270^{\circ}$ (3 o'clock) when the rotor rotates in a counterclockwise direction. We use an elliptical bearing with an inner diameter and active length of 220.30 and 110.00 mm, respectively. Bearing power loss and bearing metal temperatures are measured and evaluated by rotor rotational speed, oil flow rate, and bearing load. The results reveal a 20 reduction in the power loss when the direction of oil supply is 90. Furthermore, the oil film on the upper part of the bearing has a high temperature when the direction of oil supply is $90^{\circ}$. In contrast, when the direction of oil supply is $270^{\circ}$, the oil film on the upper part of the bearing is relatively cold.

• The Journal of Asian Finance, Economics and Business
• /
• 제9권5호
• /
• pp.285-294
• /
• 2022

Using the ARDL approach, this study examined the impact of macro factors on Vietnam's stock market in the short and long run from 2010 to 2021. The State Bank of Vietnam and the International Monetary Fund provided time series data for this study. Research results show that in the long run, money supply and exchange rate respectively affect the stock market. The money supply had a positive effect on the VN-Index, while the exchange rate showed the opposite effect. However, the study did not find a relationship between world oil price and interest rates on VN-Index in the long run. On the other hand, in the short term, there are relationships between variables; specifically, interest rates and exchange rates have a negative impact on the VN-Index, while the world oil price and the fluctuation of money supply M2 of the previous one and two months showed an impact in the same direction on this index. The differences in the regression results on the impact of exchange rate and oil price on the VN-Index compared to previous studies come from the characteristics of Vietnam's stock market, with the large capitalization of companies in the oil and gas sector, and the structure of Vietnam's economy with export heavily depends on FDI sector.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.254-257
• /
• 2002

As the large Coolant amount used of a machine holds mass serious trouble recently, an environment pollution is increased, and a machine is conquering large specific gravity in an empty cost plane. It is the stage that must reexamine the parts washing that processing is later with this current way or a problem of a liquid waste treatment back. The environmental problems by using coolant demanded the new cooling methods. As one of them, the studies on the grinding with compressed cold air and oil mist have been done. The cooling method using compressed cold air was effective through going down the temperature of compressed air supplied below -$25^{\circ}C$ and increasing the amount of compressed cold air, but had not enough cooling effect due to the low performance of lubrication. Therefore, the cooling methods using oil mist newly were suggested. This method can satisfy both cooling effect and lubrication with only small amount of coolant, also have the benefit in the point of decreasing the environmental pollution. This paper focused on analyzing the grinding characteristics of the cooling method using oil mist. The grinding test according to compressed cold air and oil mist supply direction were done.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.24-27
• /
• 2002

The environmental problems by using coolant demanded the new cooling methods. As one of them, the studies on the finding with compressed cold air and oil mist have been done. The cooling method using compressed cold air was effective through going down the temperature of compressed air supplied below $-25^{\circ}$ and increasing the amount of compressed cold air, but had not enough cooling effect due to the low performance of lubrication. Therefore, the cooling methods using oil mist newly were suggested. This method can satisfy both cooling effect and lubrication with only small amount of coolant, also have the benefit in the point of decreasing the environmental pollution. This paper focused on analyzing the grinding characteristics of the cooling method using oil mist. The grinding test according to compressed cold air, oil mist spray pressure and oil mist supply direction were done.

• 한국기계가공학회지
• /
• 제21권5호
• /
• pp.98-104
• /
• 2022

When processing parts, the cutting oil can improve the cooling performance of the workpiece and tool to increase the precision of the workpiece or extend the life of the tool and facilitate chip extraction. Since such cutting oil has a harmful effect on the environment and the human body due to additives such as sulfur, research on a minimum lubrication supply method using an eco-friendly oil is recently underway. The minimum lubrication supply method minimizes the amount of cutting oil used during processing and processes it, which can reduce the amount of cutting oil used, but has a problem in that cooling performance efficiency is poor. Therefore, this study conducted a study on mist cooling of lubricants to reduce the amount of cutting oil used and maximize the cooling effect of processing heat generated during tapping processing. Spray pressure, processing speed, direction, and lubricant spray amount, which are considered to have an effect on cooling performance, were set as process conditions, and the effect on temperature was analyzed by performing an experiment using the box benquin method among experiments were analyzed. Through the experimental analysis results, the optimal conditions for mist and processing that maximize the cooling effect were derived, and the validity of the results derived through additional experiments was verified. In the case of processing by applying the mist lubrication method verified through this study, it is considered that high-precision processing is possible by improving the cooling effect.

• 자원ㆍ환경경제연구
• /
• 제26권3호
• /
• pp.451-472
• /
• 2017

OPEC의 생산량 발표는 원유 가격에 중대한 영향을 미치는 공급교란 요인이다. 본 연구에서는 OPEC 발표가 원유 시장에 미치는 영향을 사건연구 방법론을 이용하여 분석하였다. 특히 유가 변동 및 구조변화 시기를 고려하여 유가 기간을 3개 구간으로 구분하고, OPEC의 감산, 증산, 유지 발표가 WTI 원유 수익률에 미치는 영향을 분석하였다. 분석 결과, 각 기간별로 OPEC 발표에 따른 비정상 수익 발생의 정도와 방향이 다름을 확인하였다. 또한 유가 급등기와 급락기를 구분하여 OPEC의 생산량 유지 발표의 영향을 분석한 결과, 유가 급락 조정 기간에 유지 발표에 따른 현저한 양(+)의 비정상 수익이 유의하게 발생하였다. 본 연구는 유가 변동 시기별 OPEC 발표의 영향 및 원유거래 전략에 대한 정책적 시사점을 제공한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.547-549
• /
• 2001

Recently, heating using oil and gas has been continuously replaced by that using midnight power in home, due to increase of oil price. Therefore, midnight power apparatus has been more and more spreading. However, cost of midnight power services is increasing because high fuel cost of generation facilities by existing power generation mix are charge of midnight power services. This paper analyzes trends about rapidly increasing midnight power in winter, and evaluate load pattern and supply cost of midnight power. Also, this study proposes rate direction of midnight power according to introduction of competitiveness system with B/C evaluation of midnight power cost.

• 한국지역지리학회지
• /
• 제10권1호
• /
• pp.110-131
• /
• 2004

본 연구에서는 동북아시아 에너지 공급에 중요한 영향을 미치게 될 시베리아송유관 건설과 관련하여 중국과 일본 양국이 시베리아 송유관을 자국에 유리한 방향으로 유치하려는 시도에 대한 정치경제학적 분석이다. 먼저 시베리아 송유관 건설과 관련한 지금까지의 경과를 조명한다. 다음으로 시베리아 송유관 건설문제와 관련된 러시아 국내적 및 국제적 요인을 분석하고, 이를 배경으로 러시아 에너지 공급과 관련하여 논의되는 중상주의적 및 자유주의적 접근의 적실성을 검토하였다. 분석의 결과 중상주의적 접근과 자유주의적 접근의 이분법은 행위주체로서 러시아에만 초점을 맞추고 있다는 점에서 한계를 가지고 있었다. 그 대신 러시아가 동북아지역에서 경제적 안보를 중시하면서 중상주의적 접근과 자유주의적 접근을 아우르는 에너지 공급정책을 추진하고 있다는 점에서 중상주의적-자유주의적 접근의 이분법적 분석방법의 대안으로 정치경제학적 접근이 유효한 것으로 나타났다. 마지막으로 한국의 상황에서 시베리아 송유관 건설이 가지는 함의를 제시하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제15권4호
• /
• pp.1-10
• /
• 2018

Spool displacement of a direction control valve is the standard signal to measure the bandwidth frequency of the direction control valve. When the spool displacement signal is not available, it is suggested in this study to use the metering hydraulic line as an alternative way to measure - 90 degree phase bandwidth frequency of the hydraulic direction control valve. Dynamics of the hydraulic line is composed of inertia, capacitance, and friction effects. The effect of oil inertia is dominant in common hydraulic line dynamics and the line dynamics is close to a derivative action in a range of high frequency; such as a range of bandwidth frequency of common directional control valves. Phase difference between spool displacement and line load pressure is nearly constant as a valve close to 90 degree. If phase difference is compensated from the phase between valve input and pressure, compensated phase may be almost same as the phase of spool displacement that is a standard signal to measure phase bandwidth frequency of the directional control valve. A series of experiments were conducted to examine the possibility of using line pressure in to measure phase bandwidth frequency of a directional control valve. Phase bandwidth frequency could be measured with relatively high precision based on metering hydraulic line technique and it reveals consistent results even when valve input, oil temperature, and supply pressure change.

• 대한환경공학회지
• /
• 제27권10호
• /
• pp.1030-1034
• /
• 2005

본 연구에서는 파도에너지가 비교적 작은 폐쇄성수역의 사질 조간대를 대상으로 하여 입자상 물질의 토양 침투거동을 파악하고, 유출된 기름의 조간대 사면표착이 입자상 물질의 토양침투 차단 여부를 규명하는 것을 목적으로 하여 모의 조간대 실험장치를 이용하여 실험을 하였다. 폐쇄성 수역과 같은 파도에너지가 작은 조간대에서는 쇄파대에서 붕괴된 파도에 의해서 입자상물질이 orbital 운동을 하면서 반원형태의 침투거동 (semi-circular penetration behavior)을 보였다. 또한 사면의 구배와 쇄파파고의 증가에 따라서 입자상물질의 침투속도도 증가하였다. 조석에 의해서는 토양중 해수의 이동방향과 동일한 방향으로 $45^{\circ}$ 각도를 이루며 토양중으로 침투하였다. 유출된 기름이 토양사면에 표착됨으로 인해 형성된 점착성의 유막은 입자상 물질의 토양침투를 차단하였으며, 이로인해 해수중의 식물성 플랑크톤, 세균, 유기쇄설물과 같은 입자상물질의 침투를 방해하여 조간대에 서식하는 저서생물의 먹이 공급을 감소시켜 연안 생태계에 악영향을 미칠것으로 판단된다.