• 유기물자원화
• /
• 제27권4호
• /
• pp.83-90
• /
• 2019

본 연구에서는 중유회의 고형연료로써 활용 가능성을 평가하기 위해 첨가제별 성형 특성과 조성을 분석하고, 제조한 SRF(Solid Refuse Fuel)의 발열량을 비교하였다. SRF 성형을 위해 함께 첨가한 첨가제는 귤박, 폐목재, 석탄이었으며, 함수율 30%를 기준으로 각각의 첨가제를 혼합하여 압출방법을 통해 펠렛 형태로 제조하였다. 실험결과, SRF의 성형성은 중유회와 석탄 또는 귤박을 혼합한 조건에서 우수하였으며, 발열량은 석탄을 혼합한 SRF가 4,274 kcal/kg 으로 가장 높았다. 따라서 중유회를 활용한 고형연료의 합성 조건은 20 wt%의 석탄을 혼합하여 함수율 30%로 제어하였을 때, 높은 성형성과 발열량의 향상을 나타내는 것을 확인하였다. 이 결과로부터 J 화력발전소의 중유회를 활용하여 첨가제(귤박, 폐목재, 석탄)를 일정 비율로 주입하였을 때 고형연료의 제조 가능성을 확인할 수 있었다.

• Computers and Concrete
• /
• 제10권4호
• /
• pp.349-360
• /
• 2012

In this paper, compressive strength, water permeability and abrasion resistance of concretes containing high volume fine fly ash (FFA) and fine ground palm oil fuel ash (GPA) were studied. Portland cement type I was replaced with FFA and GPA at dosages up to 70% by weight of binder. Ground river sand (GRS) was also used to replace Portland cement in order to indicate the level of filler effect. Results indicated that FFA was slightly more reactive than GPA. The replacement of 40-70% of FFA produced concretes with compressive strength, permeability and abrasion resistance comparable to those of normal concretes. The incorporation of GPA slightly reduced the performances of concretes as compared to those of FFA concretes. The reduction of Portland cement was partly compensated by the increase in pozzolanic activity of the fine fly ash and palm oil fuel ash and thus enabled the large replacement levels.

• 자원리싸이클링
• /
• 제18권1호
• /
• pp.22-29
• /
• 2009

중유회를 효율적으로 소각 처리할 수 있는 이동상식 스토카로를 설계, 제작하기 위해 중유회가 노상을 이동하면서 겪는 조건들을 회분식 노에서 모사(模寫)하여 열중량분석법으로 중유회의 소각실험을 수행하였다. 이 결과로부터 이동상식 스토카로의 운전조건 및 노상면적 등을 구하였다. 중유회의 연소과정은 연소속도 차이에 의해 3단계로 구별되며, 각 단계별로 효과적인 연소가 이루어질 수 있도록 해야 한다. 비산방지 및 체적감소를 위하여 소각 전 첨가되는 수분 함량은 20 wt.%가 적절하였다. 중유회의 연소속도는 산소농도에 크게 의존하므로, 소각로는 연소공기의 조절 기능이 필요하다. 저융점 금속화합물의 용착 및 증발을 방지하고, 소각잔사의 불용화 및 유가금속 회수를 위해 소각온도는 $750^{\circ}C{\sim}800^{\circ}C$가 적절하고, 중유회의 균일한 연소반응과 연소속도의 향상을 위해 소각 중 중유회의 교반이 요구된다. 최적 조건에서 단위면적당 소각속도는 $12.53kg/m^{2}hr$이며 1일 18 ton의 중유회를 소각처리하기 위해서는 $60m^2$의 노상면적이 필요하다.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1996년도 춘계학술발표회 초록집
• /
• pp.88-96
• /
• 1996

The characteristic analysis of fly ash generated from a fired power plant using bunker-C oil has been investigated. Ash size distribution by an optical microscopy with image processing technique, morphological shape by a scanning electron microscope(SEM) and microscope, chemical composition by the inductively coupled plasma emission spectrometry(ICP), and resistivity measurement as a function of temperature and moisture content by the resistivity meter are performed. A study of physical, chemical and electrical characteristics of bunker-C fly ash plays an important role of improving the performance of an electrostatic precipitator and protecting air pollution. The samples of bunker-C fly ash for analysis were collected from the electrostatic precipitator hopper of Ulsan Power Plant Unit 1 and Pusan Power Plant Unit 1. Mass median diameter(MMD) of bunker-C fly ash was measured 12.7${\mu}{\textrm}{m}$, while MMD of fly ash generated from the mixture of bunker-C oil(40%) and domestic anthracitic coal(60%) was 25.7${\mu}{\textrm}{m}$. The morphological structure of bunker-C fly ash consisted of fine particles of non-spherical shape. The primary chemical components of bunker-C fly ash were composed of SiO2(2.36%), Al2O3(4.91%), Fe2O3(14.33%) and C(11.84%). Resistivity of bunker-C fly ash was found to be increased with increasing temperature at the range of 100~15$0^{\circ}C$ and was measured 103~104 ohm-cm.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.222-222
• /
• 2011

Plastic product is increasing by the growth of its demand and most of refused plastics are incinerated or reclaimed. However, the refused plastic is not easily decomposed and has the environmental problem with its various toxic gas in case of incineration. Therefore, many countries such as USA, Japan, Germany and other developed industrial countries as well as Korea are interested in studying the recyclable resource of refused plastic. The macromolecular waste pyrolysis has the advantage of collecting of raw materials in high price and can at least get fuel gas or oil with high heat capacity. It also discharges low waste gas and low toxic gas including SOx, NOx and HCl heavy metals. However, pyrolyzed oil includes enough excess unsaturated hydrocarbons to form tar, which can cause the nozzle of engines to plug when pyrolyzed oil is used as fuel. Activated carbon was proven to have prominent adsorption capability among the other adsorbents that were mainly composed of carbon. This study examined the possibility of application in activated charcoal of its solid formation by analysing the feature of pyrolysis which is one of the chemical recycling methods and getting chemical analysis of the product and activated energy. Analyze the element of the oil produced by pyrolysis using GC-MS. The experiment of tar adsorption using fly-ash showed that fly-ash improved the optical intensity of pyrolyzed oil and decreased oxygen compounds in the pyrolyzed oil.

• Advances in nano research
• /
• 제4권1호
• /
• pp.15-29
• /
• 2016

A low cost environmentally benign surface coating binder is highly desirable in the field of material science. In this report, castor oil based hyperbranched polyester/bitumen modified fly ash nanocomposites were fabricated to achieve the desired performance. The hyperbranched polyester resin was synthesized by a three-step one pot condensation reaction using monoglyceride of castor oil based carboxyl terminated pre-polymer and 2,2-bis (hydroxymethyl) propionic acid. Also, the bulk fly ash of paper industry waste was converted to hydrophilic nano fly ash by ultrasonication followed by transforming it to an organonano fly ash by the modification with bitumen. The synthesized polyester resin and its nanocomposites were characterized by different analytical and spectroscopic tools. The nanocomposite obtained in presence of 20 wt% styrene (with respect to polyester) was found to be more homogeneous and stable compared to nanocomposite without styrene. The performance in terms of tensile strength, impact resistance, scratch hardness, chemical resistance and thermal stability was found to be improved significantly after formation of nanocomposite compared to the pristine system after curing with bisphenol-A based epoxy and poly(amido amine). The overall results of transmission electron microscopic (TEM) analysis and performance showed good exfoliation of the nano fly ash in the polyester matrix. Thus the studied nanocomposites would open up a new avenue on development of low cost high performing surface coating materials.

• Environmental Engineering Research
• /
• 제24권2호
• /
• pp.324-330
• /
• 2019

To recycle raw fly ash (RFA), a waste from thermal power plants, it was used to prepare solid catalysts which have many advantages compared with homogenous catalysts. When biodiesel was produced from soybean oil using RFA, only 1.2% of biodiesel conversion was obtained. A metal hydroxide, NaOH, KOH or $Ca(OH)_2$, was mixed with the acid-treated fly ash (ATFA), and the mixture was calcined at $700^{\circ}C$ for 3 h to prepare the solid catalyst. The solid catalyst prepared by mixing ATFA with NaOH, designated as SC-Na, showed a better performance than those prepared by mixing ATFA with KOH or $Ca(OH)_2$, respectively. The optimal mass ratio of ATFA with NaOH was 1:3, at which the proportion of $Na_2O$ increased to 60.2% in SC-Na, and 97.8% of biodiesel conversion was achieved under optimal reaction conditions (2 w% SC-Na relative to oil and 5 mL-methanol/g-oil at $50^{\circ}C$ for 4 h). Finally, a batch operation was repeatedly carried out to test the feasibility of reusing the solid catalyst, and more than 96% biodiesel conversion was stably achieved for the third round of operations. This study shows that RFA was successfully recycled to solid catalysts through a simple preparation method, and the solid catalyst was reused for the production of biodiesel with high conversion.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.633-637
• /
• 2001

Oil fly ash is known as one source of raw materials from which vanadium and nickel metals can be recovered. The current recovery process of valuable metals from oil fly ash is mainly the hydrormetallurgy one. Nevertheless, a great amount about 50~80%, of unburned carbon remains as byproduct after hydrormetallursy process. In Taiwan, if hydrormetallursy processes have proceeded, it can be estimated that the annual production of unburned carbon is 25 thousand tons. From the viewpoint of resource recycling, this study is a preliminary study and investigates in recovery of sub micron- graphitized carbon from unburned carbon by a designed process. The designed process included the following steps: 1.selecting a portion with +400mesh size from unburned carbon; 2.treating the selected in ultrasonic waves; 3.using a 400mesh sieve to obtain the product which is under 400mesh; 4.Removal ash from the product. In regard to treatment by ultrasonic waves in the designed process, treating time of ultrasonic waves is a simple and only variance in this study. The results indicate that the production yields increase with the treating time of ultrasonic waves; the production yield in specific conditions of this study can reach about 23%, in which ash content in product is about 2.5%. According to results of SEM, TEM and XRD, the products from the designed process are flakes in shape, several microns in size and graphitized carbon in carbon crystal phase. Except to graphitized carbon, there are a little carbon blacks, which are graphite 2H in carbon crystal phase in the products. Conclusively, the designed process is possibly applicable, by which comes to the recovery of micron- graphitized carbon.

• 청정기술
• /
• 제26권3호
• /
• pp.177-185
• /
• 2020

본 연구에서는 석탄화력발전소에서 전량 폐기되고 있는 석탄재의 재활용 방안으로 석탄회의 80%를 차지하고 있는 비산재로 부터 유용성분을 회수하고 이를 산업재로 활용하기 위한 청정부유선별 공정을 개발하였다. 비산재로부터 미연탄소(unburned carbon, UC) 를 회수하기 위해 비이온성 포수제인 등유 대신에 친환경 식물성 오일인 대두유를 사용하여 등유로부터 악취 발생을 예방하였고 부유선별 후 잔류물로부터 CM (ceramic microsphere)과 CA (cleaned ash)를 분리하기 위해 황산용액을 사용하지 않고 hydro-cyclone를 사용함으로써 산성폐수를 발생시키지 않고 미립의 CM를 회수할 수 있었다. 등유를 포수제로 사용하여 UC를 분리할 때 보다 대두유를 포수제로 사용하였을 때, 대두유의 높은 점성으로 인한 UC의 흡착성 증가와 대두유에 포함된 리놀레산에 의해 부유성 향상으로 UC의 회수율이 85.8%로 높게 나타났다. 회수된 UC에 포함된 연소가능성분(combustible component, CC)은 모두 탄소성분으로 대두유를 사용하였을 때 탄소의 함량이 높게 나타났으며, 회수된 UC는 표면이 거칠면서 기공이 많아 분쇄가 쉬워 미립화로 산업용 소재로 활용할 수 있을 것이다. Hydro-cyclone을 이용한 입도선별 청정분리공정에 의해 회수된 CM과 CA는 구형 형상으로 입자들이 서로 뭉치지 않고 뚜렷하게 분리되었으며 입자의 평균직경(D₅₀)은 5 ㎛로 미세하여 공정변경에 의한 CM의 미립화를 구현할 수 있었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.67-69
• /
• 2012

This paper is to investigate the effect of waste oil on the fundamental properties of high volume fly ash concrete depending on W/B and waste oil contents. Test results reveals that the use of waste oil resulted in an increase of slump and a decrease of air contents due to the presence of emulsion in waste oil. And it is found that the addition of waste oil does not affect the strength development of the concrete significantly.