• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.2
• /
• pp.245-261
• /
• 2019

Radioactive contaminant from a nuclear facility moves to the ecosystem by run-off or groundwater flow. Among the two mechanisms, contaminant plume through a river can be easily detected through a surface water monitoring system, but radioactive contaminant transport in groundwater is difficult to monitor because of lack of information on flow path. To understand the contaminant flow in groundwater, understanding of the geo-environment is needed. We suggest a method to decide on monitoring location and points around an imaginary nuclear facility by using the results of site characterization in the study area. To decide the location of a monitoring well, groundwater flow modeling around the study area was conducted. The results show that, taking account of groundwater flow direction, the monitoring well should be located at the downstream area. Also, monitoring sections in the monitoring well were selected, points at which groundwater moves fast through the flow path. The method suggested in the study will be widely used to detect potential groundwater contamination in the field of oil storage caverns, pollution by agricultural use, as well as nuclear use facilities including nuclear power plants.

• Korean journal of food and cookery science
• /
• v.25 no.1
• /
• pp.45-54
• /
• 2009

Contamination levels of aerobic colony counts, coliforms and pathogenic bacteria were tested in fried rice dishes to monitor quality for risk management. The prevalence of Bacillus cereus in dishes from 8 Chinese-style restaurants and 2 institutional foodservices was 10%, and the bacteria's contamination levels was 3.47 log CFU/g. Echerichia coli, Staphylococcus aureus, and Salmonella were not detected in any of the 10 samples. However, for their aerobic colony counts and numbers of isolated coliforms, the samples were 30% and 70% over the microbial criteria, respectively, for ready-to-eat foods presented in the Korean Food Code. This suggests that fried rice dishes, although cooked with oil at high temperature, require special care. For the prediction of the growth curve of B. cereus spp. in the fried rice samples, an experiment design of 3 storage temperatures ($7^{\circ}C$, $35^{\circ}C$, $57^{\circ}C$) x 5 storage times (0 h, 2 h, 4 h, 6 h, 24 h) was applied. The sample exposed to $35^{\circ}C$ showed no B. cereus spp. at 0 h; however, there was a tendency of slow growth (1.0 log CFU/g) after 4 hours of storage and then faster growth at 6 h (3.7 log CFU/g) and 12 h (4.7 log CFU/g), showing a growth rate of 0.56 log CFU/g/hr. These results indicate that fried rice, despite being heat-treated, can become heavily contaminated with B. cereus spp. when held over 2 hours at room temperature. However, the samples stored at $7^{\circ}C$ and $57^{\circ}C$ over 24 hours were not contaminated with B. cereus. Based on these results, management guidelines for controlling B. cereus are suggested.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.2
• /
• pp.122-131
• /
• 1994

Journal bearings in the rotating machineries are vulnerable to the contamination or the insufficient supply of lubricating oil, which is likely to be the cause of unexpected shutdown or malfunction of these systems. Various destructive and nondestructive testing methods had been used for the reduction of maintenance cost and the operational safety problems due to the accidents related to bearing damages. In this experimental approach, acoustic emission monitoring is employed to the detection of incipient failure caused by intervention of foreign particles most probable in the journal bearing systems. Experimental schedules for the intervention of foreign particles was composed to be more quantitative and systematic than last study in consideration of minimum oil film thickness and particle size. The experiment was conducted under such designed conditions as inserting alumina particles to the lubrication layer in the simulated journal bearing system. Several parameters such as AE rms level, waveform, AE energy distribution and other AE event parameters are used for analysis and characterization of damage source. The results showed that the history of damage was well correlated with the changes of AE rms level and the type of damage source signal can be verified using other informations such as waveform, distributions of AE parameters etc.

• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.274-278
• /
• 2013

Automatic transmission fluid (ATF) is used as an automatic transmission in the vehicle or as a characterized fluid for automatic transmission. Recently, vehicle manufacturers usually guarantee for changing fluids over 80000~100000 km mileage or no exchange. However, most drivers usually change ATF below every 50000 km driving distance when driving in Republic of Korea according to a survey from the Korea Institute of Petroleum Management which can cause both a serious environmental contamination by the used ATF and an increase in the cost of driving. In this study, various physical properties such as flash point, pour point, kinematic viscosity, dynamic viscosity at low temperature, total acid number and four-ball test were investigated for both fresh ATF and used ATF after the actual vehicle driving distance of 50000 km and 100000 km. It was shown that most physical properties were suitable for the specification of ATF, but the foam characteristics of the used oil after running 100000 km was unsuitable for the specification of fresh ATF. Therefore, the exchange cycle of ATF every 80000~100000 km driving distance is recommended considering great positive contributions to preventing environmental pollution and reducing driving cost.

• Ocean and Polar Research
• /
• v.25 no.1
• /
• pp.31-40
• /
• 2003

In August-September 2001, 15 samples of bottom sediments were collected in the inner, middle and open parts of Amursky Bay near Vladivostok, Russia, and barfin plaice Pleuronectes pinnifasciatus was sampled from the inner and the middle locations of the bay. In the sediments from all three sites elevated concentrations of several heavy metals, i.e. Zn ($102-115{\mu}/g$ dry weight), Ni $(70-73{\mu}g/g)$ and Cu $(27-35{\mu}g/g)$ were discovered. The contents of oil hydrocarbons were very close to or slightly higher than the maximal normal environmental background level, $100{\mu}g/g$ dry weight. The sediments contained negligible amounts of hexachlorocyclohexane, while DDT concentrations were quite high (1.7-16.3ng/g dry weight). Generally, there were no substantial differences in the pollution levels of the locations studied and our results resembled those reported for Amursky Bay in the 1990s. Surprisingly, in 2001 'fiesh' DDT comprised 70-85% of the total DDT content in sediment from all the locations studied. In fish liver total DDTs concentrations were 212.8 and 122.54 ng/g wet weight for the inner and the middle locations, respectively, and 'fresh' DDT comprised 35 and 64% of DDTs, respectively. These results provide evidence of recent input of DDT from an unknown source into the ecosystem of Amursky Bay. Histopathological changes revealed in the plaice liver (vacuolization of hepatocytes, coagulative necrosis of hepatocytes, inflammatory reaction, and necrosis of epithelial cells of bile ducts) are probably connected with an intensive metabolism of DDT in the fish organism. No histological and histomorphometric differences were found in the state of the interrenal tissue. Similar condition of the liver and the interrenal tissue in barfin plaice sampled from the inner and the middle locations of Amursky Bay may be explained by the absence of great differences in the pollution levels of these sites.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.2
• /
• pp.35-44
• /
• 2002

In order to determine the contamination of the aromatic hydrocarbons in soil, a fiber-optic sensing technique with fluorescence detector has been proposed. Previous researches have shown that the optimal condition for detecting benzene, toluene, ethylbenzene, xylene (BTEX) was 260 nm /290 nm (excitation/emission wavelength). However, broader fluorescence spectra of BTEX-polluted soil sample ranging from 300 nm to 600 nm were observed. Additionally, the intensity of fluorescence increased with increasing BTEX concentration, which was conspicuous in the fine-particle soil, The overall results indicated that the suggested technique could be useful for in-situ monitoring system for subsurface oil-storage tank.

• Congress of the korean instutite of fire investigation
• /
• 2010.12a
• /
• pp.63-79
• /
• 2010

It is found to the arc trace on the junction termination of 345kV cable. According to the analysis of the cable material is judged to be good. Manufacturing and design problems are not considered. In construction defects, it was estimated to the low level of insulation oil. In the majority of the arc trace appeared XLPE is found. However, there is no Soots mark, yellow band has not been confirmed, not associated with a radial arc of the spider leg is not evidence. In other opinions, void, contamination or jut are not found on the inside of XLPE. Thus, by the attachment of the impurities in surface of XLPE insulation is judged to the breakdown.

• The Journal of Engineering Geology
• /
• v.30 no.4
• /
• pp.525-539
• /
• 2020

A site containing buried solid waste and treated water and oil storage containers from a leather manufacturing plant was studied through soil and groundwater pollution and electrical resistivity surveys with the aim of identifying areas polluted by leachate generated by landfilling with leather waste and leakage wastewater. It was found that TPH and Zn exceeded environmental standards for soil pollution and, for leachate and groundwater, Cr(VI) concentrations exceeded standard levels for groundwater quality. An electrical resistivity survey was used to elucidate soil and groundwater pollution characteristics and diffusion pathways. Ten survey lines were set up with an electrode spacing of 5 m in a dipole-dipole array. The hydraulic characteristics of soil determined by groundwater contamination surveys matched well the low-resistivity-anomaly zones. Electrical resistivity surveys of areas containing contaminated soil and groundwater that have irregular strata due to waste reclamation are thus useful in highlighting vertical and horizontal pollutant diffusion pathways and in monitoring contaminated and potentially contaminated areas.