• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.05a
• /
• pp.111-119
• /
• 2002

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.4
• /
• pp.455-463
• /
• 2011

The average sulfur content of crude oil is 2.2%. Coal is about 0.3 to 4.0 percent of the sulfur gases or particles being discharged into the atmosphere through the chimney as 1 to 2% $SO_3$(Sulfur trioxide) and about 95% of the $SO_2$ is reported. $SO_3$ gas, which has many different causes of, as the combustion of sulfur containing fuel during the air due to the excess $SO_2$ gas is oxidized to $SO_3$ gas. Sulfur trioxide emitted from high sulfur heavy oil fired boiler caused white plume in stack and high temperature and cold end corrosion of facilities. So, in order to control sulfur trioxide concentration of Fuel gas in boiler, various of additives are used in other foreign. They are injected to Fuel Oil and consumed in boiler and reduce ash and the conversion rate of sulfur trioxide. In domestic, MgO compounds are used as additives but the total volume of them are made from other foreign company. In this study, MgO compounds were developed with liquid MgO compounds and field application was accomplished. The effect of newly developed chemicals and process were nearly equal to foreign products. In Consequent, the chemicals and process produced by newly developed technology can be substituted for foreign products and reduce the cost of plant operation.

• Journal of Sensor Science and Technology
• /
• v.21 no.6
• /
• pp.434-439
• /
• 2012

In this study, the oil degradation measuring for integrated sensor of drain valve was fabricated. A sensor used in the experiments was integrated with drain valves and installed in oil pan without requiring additional space. As a result of the experiments, the capacitances changed with two inflection points in accordance with an after in mileage. The first inflection point indicated the exhaustion of oil additives, and after the second inflection point, the oil degradation was completed, which increased the viscosity and disabled the functions of oil. Thus, this section was determined as the time of oil exchange.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.7
• /
• pp.1363-1372
• /
• 1992

The effects on lubricity and the anti-seizure property of lubricant according to base oils and extreme pressure additives of sulfur type and phosphorous type in cold rolling were evaluated by a laboratory scale rolling mill, where the contact conditions between work roll and strip are very close to actual cold rolling mill. The important results were obtained as follows : (1) synthetic oil has better effect on lubricity than tallow, (2) lubricant with extreme pressure additives of sulfur type of phosphorous type has better effect than base oil noly, (3) the more amount of extreme pressure additives is, the better effect on lubricity is, (4) sulfur type has better effect on lubricity than phosphorous type and (6) phosphorous type has better effect on anti-seizure property than sulfur type.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.4
• /
• pp.473-483
• /
• 1996

To protect the ozone layer, R22 will be replaced with HFCs. R407C is a leading candidate as alternative refrigerant for air conditioner due to its similar thermodynamic characteristics with R22. In replacing R22 with R407C, the compatibility with lubricating oil is of major concern. Polyol ester (POE) oil among the synthetic oils is considered to be the best lubricant for use with R407C because of good electrical properties and miscibility. However, lubricating ability of mixture of R407C/POE oil is lower than that of R22/mineral oil due to the production of acid by hydrolysis which causes corrosive wear. Therefore, to minimize water content, it is needed to develop a molecular sieve desiccant which is compatible with R407C and ester oil. This paper discusses (1) the change of properties of POE oil when current molecular seive is used, (2) the effects of POE oils and additives on durability of compressor. Through compressor life test and bench wear test, it was found that inadequate use of POE oils and additives may promote the deteriation of molecular sieve, resulting in decrease of durability of compressor.

• Journal of Advanced Technology Convergence
• /
• v.2 no.1
• /
• pp.23-31
• /
• 2023

This study was described about the EEG response results of tea tree oil fragrance for the development of functional shampoo additives. In the case of experimenters (1) the intensity change of the right brain alpha wave in electroencephalographic (EEG) response was increased after inhalation of the tea tree oil fragrance. (2) the change of physical tension and stress both the left brain and the right brain in EEG response showed a tendency to decrease after inhalation compared to before inhalation of the tea tree fragrance. (3) the mental distraction and stress was decreased after experimenters inhales the tea tree oil fragrances. These means the tea tree fragrances have both mental stability and stress relief. From above results, we prepared the functional shampoo additives with tea tree oil, and the we determined the alpha wave in EEG response after the functional shampoo additive fragrance for experimenters. As results, (4) the alpha wave intensity in left and right brain was significantly decreased after inhaling the functional shampoo additives fragrance. (5) physical tension and stress changes were decreased after inhalation of functional shampoo additive fragrance. (6) mental distraction and stress changes were also decreased after inhalation of functional shampoo additive fragrance. , From above results, the functional shampoo additives could be used as physical and mental relievers. Furthermore, the functional shampoo additives have the effects of scalp calming when the experimenter was treated shampoo with the functional shampoo additives.

• Journal of Environmental Science International
• /
• v.25 no.6
• /
• pp.757-766
• /
• 2016

MTBE and other gasoline additives contained in gasoline are known to be a refractory substance resistant to biodegradation. As a method of removing these substances, a research of method using native microbes of polluted soil was progressed and among these, bio-degradation possibility under aerobic condition was evaluated. All of the experiments were progressed based on batch experiment of lab scale and analyzed by GC-FID using HS-SPME technique. The result of bio-degradation experiment based on MTBE and other additives(ETBE, TAME) was observed below 1 mg/L, which initial concentration were 100 mg/L for each method. And through production of by-product and CO2, partial mineralization was confirmed. Degradation velocity of each additive was promptly represented in the order of TBA>ETBE>MTBE>TAME. Through this study, bio-degradation possibility of native microbes of oil polluted soil, MTBE and other gasoline additives was confirmed and it was considered that the result could be used for basic experiment data in removing oil pollutants of soil.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.697-702
• /
• 2007

The lubricational characteristics about friction and wear has an important effect on the material quality of surface. Therefore, in the case of automobile engine oil which is used under severe running condition, or therefore, the seizure and anti-scuffing is very important. We have studied the lubricational characteristics of auto engine oil with additives using Falex wear test machine. We have obtained the studied result is as fellows. In order to more improved the surface roughness characteristics adding the P(phosphate) as additives is excellent at a low temperature. Adding the ZnDTP and Ca-phenate is excellent on the anti-wear and extreme pressure properties at the high load. Moreover, when the ZnDTP and P are added, the temperature properties is excellent because the stability is maintained in a high temperature.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.97-104
• /
• 2016

OBJECTIVES : The objective of this research is to develop additives for the modification of Solvent DeAsphalting Residue (SDAR) to be used as pavement materials, and evaluate the performance of asphalt mixture manufactured using the SDAR modified by developed additives. METHODS : The SDAR generally consists of more asphaltenes and less oil components compared to the conventional asphalt binder, and hence, the chemical/physical properties of SDAR are different from that of conventional asphalt binder. In this research, the additives are developed using the low molecular oil-based plasticizer to improve the properties of SDAR. First, the chemical property of two SDARs is analyzed using SARA (saturate, aromatic, resin, and asphaltene) method. The physical/rheological properties of SDARs and SDARs containing additives are also evaluated based on PG-grade method and dynamic shear-modulus master curve. Second, various laboratory tests are conducted for the asphalt mixture manufactured using the SDAR modified with additives. The laboratory tests conducted in this study include the mix design, compactibility analysis, indirect tensile test for moisture susceptibility, dynamic modulus test for rheological property, wheel-tracking test for rutting performance, and direct tension fatigue test for cracking performance. RESULTS : The PG-grade of SDARs is higher than PG 76 in high temperature grades and immeasurable in low temperature grades. The dynamic shear modulus of SDARs is much higher than that of conventional asphalt, but the modified SDARs with additives show similar modulus compared to that of conventional asphalt. The moisture susceptibility of asphalt mixture with modified SDARs is good if, the anti-stripping agent is included. The performance (dynamic modulus, rutting resistance, and fatigue resistance) of asphalt mixture with modified SDARs is comparable to that of conventional asphalt mixture when appropriate amount of additives is added. CONCLUSIONS : The saturate component of SDARs is much less than that of conventional asphalt, and hence, it is too hard and brittle to be used as pavement materials. However, the modified SDARs with developed additives show comparable or better rheological/physical properties compared to that of conventional asphalt depending on the type of SDAR and the amount of additives used.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.8
• /
• pp.1161-1171
• /
• 2019

Objective: The current study aimed to replace soybean oil in broiler diets with linseed oil, which is rich in omega-3 fatty acid supplemented with pomegranate peel extract (PPE) and measured its effect on broiler performance, carcass traits, lipid profile, as well as fatty acids composition, phenols and flavonoids content of broiler muscles and immunity of broiler chicks. Methods: A total of 300 1-day-old Cobb chicks were randomly allotted into six experimental groups, T1 fed on basal diet with soybean oil without any additives, T2 fed on basal diet with soybean oil with addition of 0.5 g/kg diet PPE, T3 fed on fed on basal diet with soybean oil with addition of 1 g/kg diet PPE, T4 fed on basal diet with linseed oil without any additives, T5 fed on basal diet with linseed oil with addition of 0.5 g/kg diet PPE and T6 fed on basal diet with linseed oil with addition of 1 g/kg diet PPE. The PPE supplementation with 0.05% improved final body weight with either soybean oil ration or linseed oil ration. Results: The PPE improved carcass dressing percentage in comparison with the control groups. Body fat levels decreased with increasing PPE levels, especially with a linseed oil diet. Replacing soybean oil with linseed oil decreased the total cholesterol and triacylglycerol levels in broiler serum. The PPE supplementation decreased serum total cholesterol levels and increased high-density lipoprotein cholesterol levels. The content of the breast muscle alpha linolenic acid improved after replacement of soybean oil with linseed oil in broiler diets. PPE supplementation increased the phenol and flavonoid content in broiler meat and increased lysozyme activity. Conclusion: Replacing soybean oil with linseed oil in broiler diets with the addition of PPE enriched muscle meat with omega-3 fatty acids and antioxidants and improved broiler immunity and their serum lipid profile.