• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.2
• /
• pp.198-207
• /
• 1996

It is well known that drag reduction in single phase liquid flow is affected by polymer material, molecular weight, polymer concentration, pipe diameter, and flow velocity. Drag reduction in two phase flow can be applied to the transport of crude oil, phase change system such as chemical reactor, pool and boiling flow, and to present cavitation which occurs in pump impellers. But the research of drag reduction in two phase flow is not sufficient. The purpose of the present work is to evaluate the drag reduction by measuring pressure drop, void fraction, mean liquid velocity, and turbulent intensity whether polymer is added in the horizontal two phase system or not. Experiment has been conducted in a test section with the inner diameter of 24mm and the length of 1,500mm. The polymer materials used are two kinds of polyacrylamide[PAAM] and co-polymer[A611P]. The polymer concentration was varied with 50, 100 and 200 ppm under the same experimental conditions. Experimental results showed that the drag reduction of co-polymer is higher than that of polyacrylamide. Mean liquid velocities increased as polymer was added, and turbulent intensity decreased inversely near the pipe wall.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.1
• /
• pp.56-63
• /
• 2008

In this study, thermochemical degradation of hemicellulose by Acetone-Solvolysis, the effects of reaction temperature, conversion yield, degradation properties and degradation products were investigated. Experiments were performed in a tube reactor by varying reaction temperature from $200{\circ}C$ to $400{\circ}C$ at 40 min of reaction time. The liquid products from pyrolysis-liquefaction of hemicellulose contained various kinds of ketones. ketones, as 4-methyl-3-penten-2-one, 3-methylene-2-pentanone, 22,6-dimethyl-2, 5-heptadien-4-one, 4-methyl-2-pentanone, 5-methyl-2-hexanone, 3,5,5-trimethyl-2-cyclohexen-1-one, and bezenes. as 1,4-dimethylbenzene, 1-methyl-2-(1-methylethyl)-benzene, 1,4-dimethyl-2-(2-methylpropyl)benzene, 4-secbutyl-ethyl benzene, could be used as high-octane-value fuels and fuel additives. Combustion heating value of liquid products from thermochemical conversion processes of hemicellulose was in the range of $6,680{\sim}7,170cal/g$. After 40min of reaction at $400{\circ}C$ in Acetone-Solvolysis of hemicellulose, the energy yield and mass yield was as high as 72.2% and 41.2g oil/100g raw material, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.21 no.2
• /
• pp.126-135
• /
• 1997

Drag reduction in polymer solutions is the phenomenon where by extremely dilute solutions of high molecular weight polymers exhibit frictional resistance to flow much lower than the pure solvent. This effect, largely unexplained as yet, has attracted the attention of polymer scientists and fluid flow specialists. Although applications are beginning to appear, the principle interest to data has been in attempting to relate the effect to the fluid mechanics of turbulent flow. Drag reduction in two phase flow can be applied to the transport of crude oil, phase change system such as chemical reactor, and pool and boiling flow. But the research on drag reduction in two phase flow is not intensively investigated. Therefore, experimental investigations have been carried out to analyze the drag reduction produced by polymer addition in the single phase and two phase flow system. The objectives of the proposed investigation are primarily in identifying and developing high performance polymer additives for fluid transportations with the benefits of turbulent drag. Also we want to is to evaluate the drag reduction in horizontal flow by measuring pressure drop and mean velocity. Experimental results show higher drag reduction using co - polymer(A611P) then using polyacrylamide (PAAM) and faster degradation using PAAM than using A611P under the same superficial velocity.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.215-219
• /
• 2001

Impurities removal from waste carbon black was carried out to produce high-grade carbon black. A lot of hydrophilic carbon black is produced as a byproduct of the hydrogen production process by flame decomposition of water. Due to its impurity content such as sulphur, iron, ash and etc., it can only be used as low-grade carbon or burnt out. High-grade hydrophilic carbon black is 3-5 times more expensive than oil-based carbon black because of its process difficulties and requires pollutant treatment. Hydrophilic carbon is normally used far conductive materials for batteries, pigment for plastics, electric wire covering, additives for rubber, etc.. In these applications, hydrophilic carbon must maintain its high purity. In this study magnetic separation, froth flotation and ultrasonic treatment were employed to remove impurities from the low-grade hydrophilic carbon black. As results, the ash, iron and sulphur content of product decreased to less than 0.01wt.%, 0.0lwt.% and 0.3wt.% respectively, and the surface area of product was about 930 $m^2$/g.

• Applied Chemistry for Engineering
• /
• v.17 no.5
• /
• pp.498-503
• /
• 2006

i-(2',5'-Diketotetrahydrofuranyl)octadecenyl acid (OSA), an intermediate for the lubricating oil additive, was prepared by the ene-reaction of oleic acid with maleic anhydride. The reaction progress was monitored by gas chromatography by analyzing the amount of OSA. The series of succinimidyl compounds were synthesized by the reaction of alkyl amines and OSA. As a kind of lubricant additives, demulsibility, anti-wear, and anti-corrosion properties of these succinimidyl compounds were measured. The derivative of octadecylamine which has relatively long-chained alkyl group has showed good properties.

• Transactions of the Korean hydrogen and new energy society
• /
• v.15 no.4
• /
• pp.333-340
• /
• 2004

In this study, thermochemical degradation by pyrolysis-liquefaction of cellulose, the effects of reaction time, reaction temperature, conversion yield, degradation properties and degradation products were investigated . Experiments were performed in a tube reactor by varying reaction time from 20 to 80 min at $200{\sim}500^\circ{C}$. Combustion heating value of liquid products from thermochemical conversion processes of cellulose was in the range of 6,920~6,960cal/g. After 40min of reaction at $400^\circ{C}$ in pyrolysis-liquefaction of cellulose, the energy yield and mass yield was as high as 54.3% and 34.0g oil/100g raw material, respectively. The liquid products from pyrolysis-liquefaction of cellulose contained various kinds of ketones, phenols and furans. ketones and furans could be used as high-octane-value fuels and fuel additives. However, phenols are not valuable as fuels.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.2
• /
• pp.232-239
• /
• 2011

Fabric fibrous filter has been used in various industrial applications owing to the low cost and wide generality. However, the basic properties of fabric materials often limit the practical utilization including hot gas cleaning. This study attempts to find new coatings of porous fibrous filter media in order to overcome its insufficient thermal resistance and durability. Teflon was one of the plausible chemicals to supplement the vulnerability against frequent external thermal impacts. A foaming agent composed of Teflon and some organic additives was tentatively coated on the glass fiber mat. The present test Teflon foam coated filter was fount to be useful for hot gas cleaning, up to $250^{\circ}C$-$300^{\circ}C$. Close examination using XPS(X-ray Photoelectron Spectroscopy) and Contact angle proved the binding interactions between carbon and fluorine, which implies coating stability. The PTFE/Glass foam coated filter consisted of more than 95% (C-F)n bond, and showed super-hydrophobic with good-oleophobic characteristics. The contact angle of liquid droplets on the filter surface enabled to find the filter wet-ability against liquid water or oil.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.4
• /
• pp.895-900
• /
• 1999

We have examined the effects of mayonnaise on the lipid metabolism and calcium bioavailability of rats by using myonnaise. Sprague Dawley male rats(131$\pm$5g) were divided into four dietary groups[Control (Con, 10% soybean oil), Mayonnaise(M5), 10% Mayonnaise(M10)and 15% Mayonnaise(M15)] were fed ad libitum with experimental diets for four weeks. Final body weight exhibited a decrease in the M10 group, also final thymus organ weight showed a significant decreasing trend(p<0.05). The levels of serum, liver and adipose total lipid were significantly different among the four experimental groups(p<0.05). Serum calcium levels were significantly lower in the M15 group than in among the groups(p<0.05). On the other hand, the elevation of serum cholesterol levels were not clearly observed, but triglyceride levels were elevated the M5 and M15 group. The P/S ratio of adipose tissue were higher in the M10 group(2.35$\pm$0.35) than any other groups. Free EDTA in mayonnaise was 0.0307~0.0387%, moisture 12.46~16.49% and calcium 0.012~0.019%. But commercial mayonnaise contained free EDTA higher than the safe use (0.0075%). Safety problems of EDTA additives resulted from mass processed mayonnaise are arising. Though the evaluation of safety can not reach a conclusion with only one or two clinical case studies. It often simply jumps to conclusion. Therefore more wide ranged discussion and deepened study is required to search for the solution of safety problems.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.281-285
• /
• 2008

Effective use of available energy sources is of general concern along with the issues of global warming and unstable oil price. As one of the effort to recover waste heat from industrial facilities effectively, researchers have interest in a technology called organic Rankine cycle(ORC), in which the working fluid is some organic liquid instead of water. Known to have poor efficiency already, this old technology is considered to give an innovative solution to utilizing low grade energy sources, by improving the efficiency. Nano fluidics, coatings and the use of additives are the examples of these efforts. In the present study, we present simulated performance of a horizontal tube type condenser geometry. N-hexanr and isopentane are compared to water vapor case under 1 atm and the inet cooling water temperature of $20^{\circ}C$. EES(Engineering Equations Solver) is used for the present work.

• Journal of the East Asian Society of Dietary Life
• /
• v.27 no.3
• /
• pp.243-256
• /
• 2017

This study attempted to improve frying powder products based on 272 consumers' purchase conditions. Factor analysis by type was conducted on purchase attributes of consumers who purchased frying powder by categorizing them based on five factors-namely, convenience, information, diversity, safety, and economy. Five main factors were divided into four purchase attributes named various pursuit, convenience pursuit, economical pursuit, and inform/safety pursuit. Purchasing status of frying powder products was analyzed according to three independent variables such as age, meal preparation type, and purchase attributes. The top motivation for using frying powder was convenience. According to the importance-satisfaction analysis survey, taste, expiration date, and certification mark were chosen as highly important and high satisfaction characteristics for frying powder (p<0.001), whereas nutrition, oil absorption, adhesiveness, crispiness, origin, and food additives were highly important and low satisfaction characteristics (p<0.001). In the conjoint analysis, crispiness was the most important attribute of fried food.