• Journal of Digital Convergence
• /
• v.15 no.9
• /
• pp.533-541
• /
• 2017

In the rapidly changing 21st century, image management has become more important. Under these circumstances, as a lot of hair colors and beaching agents are used to create diverse hair colors, hair damage resulting from frequent chemical hair coloring has been inevitable. This study investigated how to reduce morphological changes in hair and hair damage after dividing hair into healthy hair('Group A') and damaged hair('Group B'), using the following bleaching agents: basic bleaching agent(a), beaching agent diluted with water(b), oil ingredient-added bleaching agent(c), water-shampoo mixed bleaching agent(d). The results found that even though hair damage can be prevented by a bleaching agent diluted with a mixture of diverse additives, there were better effects on hair texture in both 'Group A(4.83)' and 'Group B(4.41)' at a sensory test when hair was bleached with an addition of Camellia oil, according to blinded experiment, in particular. As a result, hair damage could be reduced. Therefore, this study expects that hair bleaching with an addition of Camellia oil to the mixture of a bleaching agent would bring the development of diverse new materials which can minimize hair damage as well as regulate hair brightness and make a contribution to the development of cosmetology market.

• Analytical Science and Technology
• /
• v.33 no.5
• /
• pp.215-223
• /
• 2020

The objectives of the present study were to assess the oxidative stability of South Korean n-3 (omega-3 fatty acid) supplements carried out from 2018 to 2019 and evaluate the influence of product characteristics on oxidative safety. A total of 76 n-3 supplements were analysed for oxidation safety by four markers, including acid value (AV), primary oxidation (peroxide value, PV), secondary oxidation (p-anisidine value, pAV) and total oxidation value (TOTOX). Among the supplements tested, 5.3 %, 55.3 %, 28.9 % and 46.1 % exceeded the international voluntary recommended levels for AV, PV, pAV and TOTOX, respectively. Purity (%) of products, remainder of expiration date (suggested shelf life), package in press through package (PTP) and products with additives had statistically significant differences oxidation assessment levels (p < 0.05). In addition, n-3 group found in Algae oil had significantly lower AV levels than the group that did not, and product with Alaska pollack oil, had significantly higher pAV levels than without group (p < 0.05). The high oxidation status of South Korean n-3 products in the present study could not be considered a public health problem right now. However, the levels of oxidation may affect a lot the efficacy and safety of using n-3 supplements. Thus, current oxidation safety limits should be reestablished by regulatory bodies to ensure the safety and efficacy of n-3 supplements, so that the standards could be applied to the products available to consumers.

• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.154-165
• /
• 2014

Development of unconventional natural resources such as shale gas, shale oil and coal bed methane, has been activated and improved the productivity due to the recent technology advance in horizontal drilling and hydraulic fracturing. However, the flowback water mixed with chemical additives, and the brine water containing oil, gas, high levels of salts and radioactive metals is produced during the gas production. Potential negative environmental impact due to large volumes of the produced wastewater is increasingly seen as the major obstacles to the unconventional natural resource development. In this study an integrated framework for the flowback and brine water treatment is proposed, and we reviewed the upcoming state of the art technology in water treatment. Basic separation processes which include not only membrane, evaporation, crystallization and desalination processes, but the potential water reuse and recycling techniques can be applied for the unconventional natural resource industry.

• Polymer(Korea)
• /
• v.35 no.5
• /
• pp.488-492
• /
• 2011

Three isocyanatopropyldimethoxysilylpolydimethylsiloxanes(IDMSi-PDMS) were synthesised from the reaction of isocyanatopropyltrimethoxysilane with monohydroxyl group termainated PDMS having different molecular weight($M_n$=5000, 10000, and 20000). Then PDMS modified polyurethane hybrid elastomer(PSMPH) were prepared from the reaction of IDMSi-PDMS with ${\alpha}$, ${\omega}$-hydroxyl group terminated polyurethane. PSMPH sealant was prepared by compounding PSMPH elastomer with additives such as plasticizer, adhesion promoter, crosslinking agent, vicosity increasing agent, inorganic filler, and catalyst at room temperature under nitrogen atmosphere. The methoxy group in the PSMPH sealant should be crosslinked with the hydroxyl group in the building stone or moisture by typical sol-gel reaction. The adhesive strength of the sealant having PDMS of $M_n$=5000 showed 40.28 kg of maxium load and 20.14 kg of break load. The shrinkage rate of the sealant having PDMS of $M_n$=20000 was 5.7% as the best result. Also, their skin over time, slump, oil content after 8 days under oil soaked paper and alkaline resistance characteristics show good results.

• Mycobiology
• /
• v.41 no.4
• /
• pp.221-224
• /
• 2013

Aphids are one of the most destructive pests in crop production such as pepper, cucumber, and eggplants. The importance of entomopathogenic fungi as alternative pest control agents is increasing. Conidia of entomopathogenic fungi are influenced by environmental conditions, such as temperature and relative humidity, and cause slow and fluctuating mortality. These factors have prevented wider application and use of biocontrol agents. For investigation of means of mitigation of such problems, we conducted bioassays with 47 fungal culture filtrates in order to evaluate the potential of secondary metabolites produced by entomopathogenic fungi for use in aphid control. Among 47 culture filtrates cultured potato dextrose broth, filtrate of Beauveria bassiana Bb08 showed the highest mortality (78%) against green peach aphid three days after treatments. Filtrate of Bb08 cultured in Adamek's medium showed higher toxicity as 100% to third instar nymphs of the aphid compared with seven other filtrates cultured in different broths amended with colloidal chitin or oil. The culture filtrates and fungal cultures from media amended with colloidal chitin or oil had lower control efficacies than filtrates without these additives in three different media. These results indicate that the fungal culture fluid or culture filtrate of B. bassiana Bb08 cultured in Adamek's medium has potential for development as a mycopesticide for aphid control.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.399-404
• /
• 2015

The cost of fuel in ships has recently increased due to a rapid increase in international oil prices and international restrictions regarding the greenhouse effect generated from the burning of fuel. Therefore, different methods for changing the hull designs for improving energy efficiency, developing coating for reducing friction resistances, developing additives for improving engine thermal efficiency, and low-speed operation for reducing fuel consumption have been considered. The developments of high-speed, large-scale, and energy-saving vessels are deemed essential to adapt to the recent high oil price era. Therefore, it is important to analyze Precisely the qualitative and quantitative changes in the resistance value of the local areas of the hull surface. In this study, the engine performance before and after docking was analyzed to examine friction resistance caused by marine growth on the hull as a basic study for improving the energy efficiency. The result was then presented by comparing it with the previous data for 2.5 years between docks to investigate the performance of the main engine, the change in friction resistances and loads, the fuel consumption and ship speed.

• Journal of Pharmacopuncture
• /
• v.18 no.2
• /
• pp.19-25
• /
• 2015

Objectives: Capsaicin (CAP) is the chief pungent principle found in the hot red peppers and the chili peppers that have long been used as spices, food additives and drugs. This study investigated the anticancer potential of CAP through its ability to modify extracellular matrix components and proteases during mice lung carcinogenesis. Methods: Swiss albino mice were treated with benzo(a) pyrene (50 mg/kg body weight dissolved in olive oil) orally twice a week for four successive weeks to induce lung cancer at the end of $14^{th}$ week. CAP was administrated (10 mg/kg body weight dissolved in olive oil) intraperitoneally. Extracellular matrix components were assayed; Masson's trichome staining of lung tissues was performed. Western blot analyses of matrix metalloproteases 2 and 9 were also carried out. Results: In comparison with the control animals, animals in which benzo(a)pyrene had induced lung cancer showed significant increases in extracellular matrix components such as collagen (hydroxy proline), elastin, uronic acid and hexosamine and in glycosaminoglycans such as hyaluronate, chondroitin sulfate, keratan sulfate and dermatan sulfate. The above alterations in extracellular matrix components were effectively counteracted in benzo(a)pyrene along with CAP supplemented animals when compared to benzo(a) pyrene alone supplemented animals. The results of Masson's trichome staining for collagen and of, immunoblotting analyses of matrix metalloproteases 2 and 9 further supported the biochemical findings. Conclusion: The apparent potential of CAP in modulating extracellular matrix components and proteases suggests that CAP plays a chemomodulatory and anti-cancer role working against experimentally induced lung carcinogenesis.

• Elastomers and Composites
• /
• v.32 no.5
• /
• pp.295-301
• /
• 1997

The effects of filler types and compositions on the final properties such as tensile strength, % elongation, hardness, and specific gravity of chloroprene rubber were investigated. The fillers involved in this investigation were HAF-type carbon black, Mistron, and white clay, For each filler, the variation of filler compositions gave almost the linear effects on the all properties investigated. For a fixed filler composition, different filler types gave different influential strength on rubber properties. After linearlization of experimental data with respect to each filler composition, the simple linear addition of each property with respect to filler compositions was applied to predict the final properties of the filler included rubber systems. For the chloroprene rubber system including the fillers composed of Mistron(25phr)/HAF(20phr)/clay(35phr), the predicted properties were well in accordance with the experimental results. Similar results were obtained for other additives such as processing oil and accelerator.

• Korea-Australia Rheology Journal
• /
• v.15 no.3
• /
• pp.117-124
• /
• 2003

Elastohydrodynamic lubrication (EHL) film is measured under the condition of viscosity index improver added to base oil. In-situ optical contact method using the interference principle make the measuring resolution of ~5 nm possible and enables the measuring range all over the contact area of up to ~300 $\mu\textrm{m}$ diameter. What is more important to the developed method by the author is that the measurement of EHL film thickness is possible in the range from 100 nm to 2 $\mu\textrm{m}$, which is the regime of worst contact failures in precision machinery. Viscosity index improver (VII) is one of the major additives to the modem multigrade lubricants for the viscosity stability against temperature rise. However, it causes shear thinning effects which make the film thickness lessened very delicately at high shear rate (over $10^5 s^{-1}$) of general EHL contact regime. In order to exactly verify the VIIs performance of viscosity stability at such high shear rate, it is necessary to make the measurement of EHL film thickness down to ~100 nm with fine resolution for the preliminary study of viscosity control. In this work, EHL film thickness of VII added lubricant is measured with the resolution of ~5 nm, which will give very informative design tool for the synthesis of lubricants regarding the matter of load carrying capacity at high shear rate condition.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.1
• /
• pp.5-14
• /
• 2003

Cutting fluids used for superfinishing are usually mineral based oils With sulfur and chlorine additives. These cutting fluids are an environmental hazard and can adversely affect the health of personnel on the shop floor. The present investigation was undertaken to explore the possible alternative use of environmentally-conscious cutting fluids for superfinishing. Unlike mineral oils, these environmentally-conscious cutting fluids are biodegradable and non-hazardous. Experiments were conducted for testing an ester oil manufactured by Accu-Lube applied in miniscule amounts using the Minimum Quantity Lubrication (MQL) technique. A significant improvement in stock removal was found with the 6 stones tested. The specific energy values associated with the process were also significantly lower than those obtained previously with conventional straight oils and the water based synthetic fluid, indicative of better lubrication, while the surface roughness was comparable. These tests prove that MQL with ester oils can be a very effective environmentally-conscious alternative to conventional straight oils.