• 한국염색가공학회지
• /
• 제21권6호
• /
• pp.22-28
• /
• 2009

Oil-absorbable nonwovens were produced by melt-blown processing of polypropylene chips. The melt-blown processing conditions, such as air pressure, and gear pump speed, DCD. In this study, these three factors were chosen to produce samples. Experimental array and variance analysis of the design of experiment were used to increase the field repeatability and universality. The effect of the factors on oil absorption properties of melt-blown nonwoven fabric such as oil absorbency were evaluated. As a result, the fiber diameter decreased as gearpump speed decreased or air pressure increased. The oil absorbency increased as air pressure increased or gearpump speed decreased and with the DCD increasing the oil absorbency significantly increased.

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.257-263
• /
• 2010

Oil-absorbable nonwovens were produced by meltblown processing of polypropylene chips. In this study, experimental array and variance analysis of the design of experiment were used to increase the field repeatability and universality. Oil absorbency was decreased, as oil absorbable nonwovens of packing density and gearpump speed were increased. Oil absorption rate was increased, as packing density was increased. Also the oil absorption rate increased with increasing gear-pump speed.

• 한국환경과학회지
• /
• 제22권2호
• /
• pp.243-249
• /
• 2013

Fibers of microbial polyesters, poly(3-hydroxy butyrate) (PHB) and poly(3-hydroxy butyrate-co-3-hydroxy valerate) (HB-co-HV) were prepared by electrospinning method. The obtained fibers were evaluated by differential scanning calorimetry, scanning electron microscopy, and oil absorption. The formation of fibers was strongly dependent on a concentration of solution. At a low concentration, the fibers contained beads which is from aggregation of polymer due to short evaporation time. The fine fibers with $2-5{\mu}m$ diameter were obtained at 20 wt% concentration. The contact angle measurement showed that the fiber had higher water contact angle than the film due to the lotus-like effect. Oil absorbency showed that the fiber had higher than the film. Specially, the HB-co-HV fiber which was spinned from 20 wt% absorbed 65% oil which is much higher than that of a normal polypropylene-based oil paper.

• 한국의류학회지
• /
• 제31권7호
• /
• pp.1119-1127
• /
• 2007

Nonwovens have been widely used in various regions from the households to the industrial, agricultural and medical goods. Synthetic fibers have been used for source of nonwovens commonly because of their useful and economic properties. They are not only main factor causing environmental problems but also spend huge cost to renew the environmental disruption by them. Nonwovens must have both cost-competitiveness and environment-friendly property to be the desirable sources in 21th centuries. For meet these needs, it is suitable for the times that economical and environmentally-safe kenaf fibers would be used as raw materials of nonwovens. Kenaf and polyester fibers were blended in 4 types of ratio : 0/100, 20/80, 40/60, 60/40 were needle-punched. The nonwovens properties such as color values, surface appearance, strength, elongations, stiffness, moisture regain, water and oil absorbency, and electrification were tested. As the results, tensile and tear strengths, water and oil absorbency were maximum at 20/80 kenaf/polyester blend nonwoven, because of effecting by nonwoven structure and fiber properties. The moisture regain were increased according to kenaf were blended and the eletrification reduced in proportion to the kenaf fibers by chemical property of fiber composed nonwovens.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 가을 학술발표회 논문집
• /
• pp.165-166
• /
• 2003

완전히 가수분해 된 폴리비닐알콜(PVA)은 에멜전 안정화와 계면활성이 약하다. $^{1)}$ 하지만 hydrophobically modified PVA는 높은 계면활성을 가지고 있을뿐더러 수용액에서 micelle을 형성할 수 있고 게다가 그의 수용액은 높은 viscosity, shear thinning, thixotropic, less salt sensitive 성질을 가지고 있어 enhanced oil recovery operations, drag reduction, flocculation, super absorbency, latex paints, hydraulic fluids, surface coatings등에 사용될 수 있다. $^{2.3)}$ (중략)

• 한국의류학회지
• /
• 제33권11호
• /
• pp.1696-1706
• /
• 2009

Nonwoven fabrics have been widely used in various fields that include household, industrial, agricultural, medical goods, especially in the automobile industry. In this study, eco-friendly fiber materials were developed and investigated as a substitute material for polyester fibers in nonwovens. To make plant fiber bundles, stems of Indian mallow (IM), and Kuzu vine (KV) were retted; in addition, the non-cellulose component was partially removed. Plant fiber bundles and polyester fibers (P) were blended and needle punched to produce nonwovens. Five kinds of nonwovens were manufactured: P100 (Polyester 100%), IM10 (IM 10% and Polyester 90%), IM20 (IM 20% and Polyester 80%), KV10 (KV 10% and Polyester 90%), and KV20 (KV 20% and Polyester 80%). The color values, surface appearance, tensile strength, elongation, tear strength, abrasion strength, flexstiffness, moisture regain, water or oil absorbency, and static electricity of manufactured nonwovens are investigated. As the blended ratios of IM or KV increased, the brightness of nonwovens decreased compared to that of polyester 100%. Tensile strength, tear strength, abrasion strength, and flexstiffness of IM10 as well as KV10 were higher than those of P100, IM20, and KV20, resulting from the influence of the structure and properties of nonwoven fibers. Moisture regain and water or oil absorbency increased, while static electricity decreased in proportion to the amount of plant fibers. IM or KV and polyester blended nonwovens showed improved properties over P100 that could be substituted for P100 as a novel material for textiles.

• 한국산학기술학회논문지
• /
• 제17권2호
• /
• pp.528-535
• /
• 2016

Ethyl acrylate(EA) 혹은 lauryl acrylate(LA)와 hydroxy ethyl acrylate(HEA)를 용액중합법에 의해 공중합하여 2종의 친유성 아크릴 전구중합체를 얻은 다음, 여기에 가교제로서 hexamethylene diisocyanate(HDI)를 첨가 배합하여, 폴리프로필렌 velvet 편직물에 통상의 pad-dry-cure방법으로 수지가공을 실시하여 유흡착재를 제조하였다. 가교 아크릴 수지(EA-HEA-HDI)의 겔화도는 전체 acrylate에 대한 HEA의 사용량과 가교제인 HDI의 농도가 증가할수록 증가하였다. 얻어진 유흡착재의 수지 부착율에 따른 흡유능과 유보유율은 시험유로서 n-decane, toluene, 대두유, 윤활유, 벙커C유를 사용하여 평가 하였고 대두유를 제외하고 사용된 모든 오일에 걸쳐 흡유능에 미치는 최적의 부착율은 약 6%로 나타났다. 한편 유보유율은 부착율의 증가에 따라 증가하였고 더욱이 고비중, 고점도 오일의 경우에서 전반적으로 보다 증가된 값을 나타내었다. 또한 흡유능은 LA-HEA-HDI로 처리된 유흡착재가 EA-HEA-HDI의 그것에 비하여 높았으며, 아크릴 수지의 측쇄 알킬기의 길이가 증가할수록 보다 높은 흡유능을 나타내었다.

• 한국가정과교육학회지
• /
• 제7권1호
• /
• pp.1-10
• /
• 1995

This study was intended to provide an improved method for testing textiles in high school. Four kinds of test subjects were selected and applied to the classes. Problems of the methods in the textbooks were corrected as follows: 1)Burning test: The number of specimen is reduced to 3 kinds of fibers(cotton, wool, and polyester) and recommends are given to make result by comparing with the burning characteris-tics of paper and hair. 2) Absorbency test: Test Method is changed to drop test. The result is recorded by measuring time required for the water drops absorbed to the specimen. 3) Wrinkle recovery test: A glass is provided instead of metal weight. The method of measuring angle which is made by the specimen is shown in figure. 4) Effects of Detergent: 0.2% of detergent solution is provided before class. The amount of oil and carbon black is specified. Students have generally agreed that the improved methods were better than those in the text-books after they made the above 4 recommendable experiments(p<.001)

• 폴리머
• /
• 제30권4호
• /
• pp.286-292
• /
• 2006

Super water-absorbent resins were prepared by inverse suspension copolymerization of sodium acrylate, acrylamide and 2-hydroxyethyl acrylate using N, N'-methylene-bis-acrylamide as cross-linker. For the suspension copolymerization, monohexadecyl phosphate was employed as the dispersing agent, cyclohexane as the dispersing medium and potassium persulfate as the initiator. The dependence of water-absorption capacity on the amount of crosslinking agent, oil/water ratio, degree of neutralization and the composition of the copolymer were systematically investigated. Furthermore, the swelling kinetics of the super water-absorbent copolymer was carried out. The absorption of the resins is more than 1800 g/g for deionized water and 100 g/g for 0.9% NaCl solution, respectively. The copolymers showed an increased salt resistance and enhanced water retention of soil.