• 대한조선학회논문집
• /
• 제58권1호
• /
• pp.32-39
• /
• 2021

Korean coastal fishery suffers from profitability degradation due to a decrease in fisheries resources, pollution in coastal waters, fuel coast increase, and market opening for aquaculture products. The next generation Korean fishing vessel aims at the improvement of energy efficiency, enhancement of crew welfare, and safety. These purposes can be accomplished by adopting a new standard hull form with improved resistance performance and a modernized residence facility on the deck. In order to improve resistance performance, this study attempts to optimize design variables for stern flaps for three kinds of fishing vessels - coastal multi-purpose, coastal trap, and dredged nets. A series of model tests for these fishing vessels was carried out in the towing tank of Pusan National University. The results indicate that for some cases, the stern flap caused the stern trim of the vessel to decrease, leading to the resistance reduction.

• 해사법연구
• /
• 제29권2호
• /
• pp.115-144
• /
• 2017

2007년 미국에서 시작된 글로벌 금융위기의 영향은 국내의 해운 조선 분야에도 크게 영향을 미쳤다. 이와 관련하여 국내 조선소는 해운경기 악화로 인한 상선 수주물량 감소의 대체수단으로 여러 방면에서 수주전략을 수립하였고, 선택한 분야가 해양플랜트였다. 그러나 국내 조선소는 해양플랜트 관련 계약이 갖고 있는 위험성 분석에 대한 대비 없이 단순한 매출액 확대와 일감확보를 위한 무리한 영업 수주전략을 추진하였다. 이러한 결과, 해양플랜트 발주자와 초기에 계약한 금액보다 많은 비용이 투입되거나 제조물 인도지연에 따른 지체상금을 지급해야 하는 법적인 문제로 확대되었다. 주요 법적분쟁의 원인은 해양플랜트공사 시 발생할 수 있는 비선형모델에 의한 위험성 분석, 공정관리의 미숙, 국내 조선소가 "Engineering Procurement Construction 일괄계약"을 사용하는 해양플랜트공사계약의 이해 부족에 기인한다. 특히, 위험성 관리 항목의 한 요소로써 계약상의 독소조항에 대한 충분한 검토가 이루어지지 않은 점에 있다. 이러한 계약서를 검토할 만한 인력도 부재하다. 따라서 이 연구에서는 계약목적물의 인도지연이 발생할 수 있는 구체적 위험성의 존재를 식별하고, 해양플랜트공사계약 상에는 어떠한 불공정조항이 존재하며, 그러한 불공정조항이 실제 양 당사자에게 어떻게 적용되는지를 국내 조선소의 프로젝트 관리자의 인터뷰와 선행연구를 참조하여 구체적 위험요소가 계약상으로 어떻게 함의되는가에 대해서 살펴보았다. 이를 통하여 해양플랜트공사계약상 제조물인도지연에 관한 계약당사자의 법적 책임관계와 국내 조선 해양플랜트 산업발전에 기여할 수 있는 개선방안을 도출하였다.

• 수산해양기술연구
• /
• 제45권3호
• /
• pp.177-187
• /
• 2009

This paper describes a automatic video surveillance system(AVSS) with long range and 360$^{\circ}$ coverage that is automatically rotated in an elevation over azimuth mode in response to the TTM(tracked target message) signal of vessels tracked by ARPA(automatic radar plotting aids) radar. This AVSS that is a video security and tracking system supported by ARPA radar, CCTV(closed-circuit television) camera system and other sensors to automatically identify and track, detect the potential dangerous situations such as collision accidents at sea and berthing/deberthing accidents in harbor, can be used in monitoring the illegal fishing vessels in inshore and offshore fishing ground, and in more improving the security and safety of domestic fishing vessels in EEZ(exclusive economic zone) area. The movement of the target vessel chosen by the ARPA radar operator in the AVSS can be automatically tracked by a CCTV camera system interfaced to the ECDIS(electronic chart display and information system) with the special functions such as graphic presentation of CCTV image, camera position, camera azimuth and angle of view on the ENC, automatic and manual controls of pan and tilt angles for CCTV system, and the capability that can replay and record continuously all information of a selected target. The test results showed that the AVSS developed experimentally in this study can be used as an extra navigation aid for the operator on the bridge under the confusing traffic situations, to improve the detection efficiency of small targets in sea clutter, to enhance greatly an operator s ability to identify visually vessels tracked by ARPA radar and to provide a recorded history for reference or evidentiary purposes in EEZ area.

• 해양환경안전학회지
• /
• 제23권6호
• /
• pp.628-638
• /
• 2017

최근 국내 일부 항해사들은 해운산업의 어려운 취업환경을 극복하고, 직업선택의 저변을 확대하기 위하여 승선경력을 기반으로 국내외 교육기관에서 DP운항사 교육을 이수하여 직종을 전환하고자 노력하고 있다. 그러나 아직까지 국내에서는 해양플랜트 서비스 산업이 활성화 되어있지 않기 때문에 동 분야로 진출하고자 하는 항해사들은 어렵게 자격취득을 위한 실습을 마치고 대부분 해외선사로 진출하고 있다. 그럼에도 불구하고 DP운항사로 취업을 희망하는 항해사들은 경력을 중시하는 해외 해양플랜트 기업의 보수적인 채용 절차, 비영어권 출신자의 언어사용의 한계, 다문화 승선생활의 어려움, 필수 직무요건에 대한 체계적인 정보 부족 등의 이유로 구직 단계에서 부터 어려움을 겪고 있다. 따라서 이 연구는 DP운항사가 갖추어야 할 직무능력 및 자격 요건을 분석하여 국가에서 요구하는 최소한의 능력 수준을 제시하고 있는 NCS 표준 개발을 위한 기초자료를 제공하고, DP운항사 전문인력양성을 활성화하기 위한 방안을 제시하는 데 목적을 두고 있다. 본 연구의 결과로서, DP운항사의 직무 분류, 직무능력표준 및 경력개발경로를 제시하였고, DP운항사 양성 활성화 방안으로서 DP 실습선박의 공동 활용, DP 전문 교원 양성 및 정부주도 NCS 수출모델을 제안하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권7호
• /
• pp.718-728
• /
• 2013

Analysis of scenarios of transportation oil and gas which produced in the Arctic and others cold seas shows that in the near-term there will be a significant increase of tonnage of tankers for oil and gas and number of ships which should be exploited in difficult ice conditions. For the construction of ice-resistant structures (IRS) intended for production of oil and gas and transportation of these products at ice-class vessels, calculating the load from ice to board the ship and on surface of supports of the platforms are the actuality and urgent tasks. These tasks have one basis in both cases: at beginning of the contact occurs fracture of edge of ice, then occurs compressing of rubble shattered of ice, then they extruding from contact area, after this next layer of ice begin to destruct. At calculating the strength of plating and elements construct of vessels, icebreakers and ice-resistant platforms the specific energy of mechanical destruction ice ${\epsilon}_{cr}$ is an important parameter. For the whole period of study of physical and mechanical characteristics of sea ice have been not many experimental studies various researchers to obtain numerical values of this energetic characteristic of the strength of ice by a method called Ball Drop Test. This study shows that the destruction of the ice from dynamic loading in zone of contact occurs in several cycles, and the ice destructed with a minimum numerical values of ${\epsilon}_{cr}$. The author offer this energy characteristic to take as a base value for the calculation of ice load on ships and offshore structures.

• 한국해양공학회지
• /
• 제27권2호
• /
• pp.59-68
• /
• 2013

Because of the recent increase in maritime cargo capacity, the production and price of crude oil have been rising. As oil prices have risen, many problems have occurred in the industry. To solve these problems, marine resources are being actively developed, and there has been an increase in the orders for special vessels and marine structures for the development of marine resources. However, consequently, various kinds of accidents have also occurred in these special vessels and structures. One of the major types of accidents involves fire and explosion, which cause many casualties and property damage. Therefore, various studies to estimate and prevent such accidents have been carried out. In this study, as basic research for the prevention of fire and explosion, numerical simulations on combustion were carried out by using a commercial grid generation program, Gridgen, and a CFD program, ANSYS-CFX. The influences of some parameters, such as the grid system, turbulence model, turbulent dissipation rate, and so on, on the simulation results were investigated, and optimum ones were chosen. It was found that the present results adopting these parameters agreed moderately well with other experimental and numerical ones.

• Structural Engineering and Mechanics
• /
• 제75권6호
• /
• pp.785-797
• /
• 2020

As the growth of world trade has surged rapidly over the past years, the number is expected to continue growing over the coming years. Although the transportation costs can be reduced by using larger vessels, however, new berthing structures have to be constructed in order to cater for the larger vessels. This leads to a need for researching on designing a better berthing structure. For optimization of berthing structure design, we need to provide a better estimation of berthing energy than the previous methods in the existing guidelines. In this study, several berthing parameters were collected from previous works and researches. Moreover, the scenarios were selected efficiently by using a sampling technique. First, the berthing energy was calculated by executing 150 numerical simulations. Then, the numerical simulation results were compared with the results calculated by existing methods quantitatively to investigate the sensitivity of the berthing parameters and the accuracy of existing methods. The numerical method results have shown some deviation with respect to the existing method results in which the degree of deviation varies with the methods and the tendency of differences is dependent on certain berthing parameters. Then, one of the existing methods which has shown a small deviation was selected as a representative method and applied with several safety factors to obtain a suitable safety factor for the design.

• 수산해양기술연구
• /
• 제53권3호
• /
• pp.266-275
• /
• 2017

The maximum sustained yield (MSY) of shellfish caught through dredge fishery was 7,250 to 7,490 MT from 1990 to 1999, which was not affected by the construction of the Saemangeum Dike. The MSY from 2000 to 2016, under the influence of the dike, was 1,716 to 1,776 MT when the total annual fish catch was 1,000 MT or more, and 289 to 336 MT when it was less than 1,000 MT. The construction of the Saemangeum Dike led to a decrease in the catch volume of the offshore dredge fishery in Jeollabuk-do, to 4.2 to 23.7% of that before its construction. The allowable biological catch (ABC) was estimated to be 313 to 1,532 MT per year, which was about 72.3 to 94.3% less than before the construction of Saemangeum Dike. Currently, the dredge fishery in Jeollabuk-do relies on comb pen shells. For fishery management, the catch per vessel should be set at 51.0 MT/year or less, and the number of fishing vessels should be reduced to 22 as quickly as possible. Besides, in the long term, the number of current fishing vessels should be reduced to less than half in consideration of the comb pen shell collecting period in Jeollabuk-do.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.241-257
• /
• 2020

The rapid proliferation of oil/gas drilling and wind turbine installations with jack-up rig-formed structures increases structural safety requirements, due to the greater risks of operational collisions during use of these structures. Therefore, current industrial practices and regulations have tended to increase the required accidental collision design loads (impact energies) for jack-up rigs. However, the existing simplified design approach tends to be limited to the design and prediction of local members due to the difficulty in applying the increased uniform impact energy to a brace member without regard for the member's position. It is therefore necessary to define accidental load estimation in terms of a reasonable collision scenario and its application to the structural response analysis. We found by a collision probabilistic approach that the kinetic energy ranged from a minimum of 9 MJ to a maximum 1049 MJ. Only 6% of these values are less than the 35 MJ recommendation of DNV-GL (2013). This study assumed and applied a representative design load of 196.2 MN for an impact load of 20,000 tons. Based on this design load, the detailed design of a leg structure was numerically verified via an FE analysis comprising three categories: linear analysis, buckling analysis and progressive collapse analysis. Based on the numerical results from this analysis, it was possible to predict the collapse mode and position of each member in relation to the collision load. This study provided a collision strength assessment between attendant vessels and a jack-up rig based on probabilistic collision scenarios and nonlinear structural analysis. The numerical results of this study also afforded reasonable evaluation criteria and specific evaluation procedures.

• 수산해양기술연구
• /
• 제54권3호
• /
• pp.224-230
• /
• 2018

Squid is one of the important fisheries resources in Korea. Therefore, squid has been designated and managed as a target species of total allowable catch (TAC) since 2007, but the catch amount is gradually decreasing. The analysis was conducted to identify the change of relative fishing power index to develop the vessel and gear technology that may have improved the fishing efficiency of the offshore squid jigging fishery from 1960s to 2010s. Gross tonnage per fishing vessel increased with the increase in size until 1990, but then gradually decreased to 41.0 tons in 2000 and 37.1 tons in 2010. The illuminating power (energy consumption) by fishing lamps increased to 180 kW in 2005 and stabilized to 120 kW in 2015. Jigging machine started to be supplied to fishing vessels from the early 1970s, and fish finders began to be supplied in the early 1980s and gradually increased. Therefore, the relative fishing power index in the offshore squid jigging fishery increased from 1.0 in 1980 to 1.1 in 1990, to 3.5 in 2000 and to 2.5 in 2010, but the increment rate slowed down gradually. The results are expected to contribute to reasonable fisheries stock management.