• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.5
• /
• pp.19-25
• /
• 2008

In this study, we fabricated Organic Thin Film Transistors(OTFTs) with $C_{60}$ hole injection layer between organic semiconductor(pentacene) and metal electrode, and we compared the electrical characteristics of OTFTs with/without $C_{60}$. When the $C_{60}$ hole injection layer was introduced, the mobility and the threshold voltage were improved from 0.298 $cm^2/V{\cdot}s$ and -13.3V to 0.452 $cm^2/V{\cdot}s$ and -10.8V, and the contact resistance was also reduced. When the $C_{60}$ is inserted, the hole injection was enhanced because the $C_{60}$ prevent the unwanted chemical reaction between pentacene and Au. Furthermore, we fabricated the OTFTs using Al as their electrodes. When the OTFTs were made by only aluminum electrode, the channel were not mostly made because of the high hole injection barrier between pentacene and aluminum, but when the $C_{60}$ layer with an optimal thickness was applied between aluminum and pentacene, the device performances were obviously enhanced because of the vacuum energy level shift of Al and the consequent decrease of the hole injection barrier which was induced by the interface dipole formation between $C_{60}$ and Al. The mobility and $I_{ON}/I_{OFF}$ current ratio of OTFT with $C_{60}/Al$ electrode were 0.165 $cm^2/V{\cdot}s$ and $1.4{\times}10^4$ which were comparable with the normal Au electrode OTFT.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.2
• /
• pp.99-104
• /
• 2020

In this study, we fabricated a metamorphic high-electron-mobility transistor (mHEMT) device with a T-type gate structure for the implementation of W-band monolithic microwave integrated circuits (MMICs) and investigated its characteristics. To fabricate the mHEMT device, a recess process for etching of its Schottky layer was applied before gate metal deposition, and an e-beam lithography using a triple photoresist film for the T-gate structure was employed. We measured DC and RF characteristics of the fabricated device to verify the characteristics that can be used in W-band MMIC design. The mHEMT device exhibited DC characteristics such as a drain current density of 747 mA/mm, maximum transconductance of 1.354 S/mm, and pinch-off voltage of -0.42 V. Concerning the frequency characteristics, the device showed a cutoff frequency of 215 GHz and maximum oscillation frequency of 260 GHz, which provide sufficient performance for W-band MMIC design and fabrication. In addition, active and passive modeling was performed and its accuracy was evaluated by comparing the measured results. The developed mHEMT and device models could be used for the fabrication of W-band MMICs.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.2
• /
• pp.127-134
• /
• 2018

Arteriosclerosis is the major cause of coronary artery and cerebrovascular disease, which are leading causes of death. Pro-inflammatory cytokines induce injury to vascular endothelial cells by increasing cell adhesion molecules, leading to vascular inflammation, a major risk factor for the development of arteriosclerosis. In the current study, we investigated the inhibitory effect of enzymatic hydrolysate from Japanese mud shrimp Upogebia major on the inflammation of tumor necrosis $factor-{\alpha}$ ($TNF-{\alpha}$)-stimulated human umbilical vein endothelial cells (HUVECs). We first evaluated the antioxidant and angiotensin I-converting enzyme (ACE) inhibitory activities of eight U. major enzymatic hydrolysates: alcalase, papain, ${\alpha}$-chymotrypsin (${\alpha}-Chy$), trypsin, pepsin, neutrase, protamex and flavourzyme. Of these, ${\alpha}-Chy$ exhibited potent antioxidant and ACE inhibitory activities. The ${\alpha}-Chy$ hydrolysate was fractionated by two ultrafiltration membranes of 3 and 10 kDa. The ${\alpha}-Chy$ hydrolysate of U. major and its molecular weight cut-off fractions resulted in a significant reduction in NO production and a decrease in cell adhesion molecules [vascular cell adhesion molecule-1 (VCAM-1), intercellular adhesion molecule-1 (ICAM-1) and endothelial-selectin (E-selectin)] and pro-inflammatory cytokines [interleukin-6 (IL-6), interleukin-8 (IL-8) and monocyte chemoattractant protein-1 (MCP-1)] in $TNF-{\alpha}$-stimulated HUVECs. These results suggest that enzymatic hydrolysate from U. major can be used in the control and prevention of vascular inflammation and arteriosclerosis.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.6
• /
• pp.903-910
• /
• 2015

To maintain a predominantly pasture-based system, the large herd milked by automatic milking rotary would be required to walk significant distances. Walking distances of greater than 1-km are associated with an increased incidence of undesirably long milking intervals and reduced milk yield. Complementary forages can be incorporated into pasture-based systems to lift total home grown feed in a given area, thus potentially 'concentrating' feed closer to the dairy. The aim of this modelling study was to investigate the total land area required and associated walking distance for large automatic milking system (AMS) herds when incorporating complementary forage rotations (CFR) into the system. Thirty-six scenarios consisting of 3 AMS herds (400, 600, 800 cows), 2 levels of pasture utilisation (current AMS utilisation of 15.0 t dry matter [DM]/ha, termed as moderate; optimum pasture utilisation of 19.7 t DM/ha, termed as high) and 6 rates of replacement of each of these pastures by grazeable CFR (0%, 10%, 20%, 30%, 40%, 50%) were investigated. Results showed that AMS cows were required to walk greater than 1-km when the farm area was greater than 86 ha. Insufficient pasture could be produced within a 1 km distance (i.e. 86 ha land) with home-grown feed (HGF) providing 43%, 29%, and 22% of the metabolisable energy (ME) required by 400, 600, and 800 cows, respectively from pastures. Introduction of pasture (moderate): CFR in AMS at a ratio of 80:20 can feed a 400 cow AMS herd, and can supply 42% and 31% of the ME requirements for 600 and 800 cows, respectively with pasture (moderate): CFR at 50:50 levels. In contrast to moderate pasture, 400 cows can be managed on high pasture utilisation (provided 57% of the total ME requirements). However, similar to the scenarios conducted with moderate pasture, there was insufficient feed produced within 1-km distance of the dairy for 600 or 800 cows. An 800 cow herd required 140 and 130 ha on moderate and high pasture-based AMS system, respectively with the introduction of pasture: CFR at a ratio of 50:50. Given the impact of increasing land area past 86 ha on walking distance, cow numbers could be increased by purchasing feed from off the milking platform and/or using the land outside 1-km distance for conserved feed. However, this warrants further investigations into risk analyses of different management options including development of an innovative system to manage large herds in an AMS farming system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.399-406
• /
• 2020

The R.O.K Army has developed and operated TM to maintain the operation of weapons systems since its establishment. As more modern weapons systems were developed, the more efficient operation was limited by a large quantity. As a countermeasure, the DAPA has operated the IETM using the KAIS TOOL since 2003. However, 16 years later, they were shunned by operators for software instability and other reasons. Based on the results of an operational test and evaluation team of the Army headquarters, the analysis results of software instability, limited compatibility and integration, limited real-time updates, etc. were analyzed. It was confirmed that KAIS development tools were urgently needed. Therefore, in order to solve this current problem for the Army IETM, the first phase of this paper focused on improving the IETM by maintaining the application present, the second of the Army Electronic Technology manual, phase going to propose improvement plans for operational test and evaluation by lining 11 elements of comprehensive logistics support with an electronic technology code.

• Environmental and Resource Economics Review
• /
• v.21 no.1
• /
• pp.93-127
• /
• 2012

We estimate how much KEPCO can save their loss and how much social welfare can be increased by applying the real-time pricing instead of current regulated retail price in the electricity market in order to analyze the problem of the regulated retail price which is fixed below the marginal cost. We estimate the demand functions of peak time and off-peak time in summer (June to August) and winter (December to February). We construct the supply function based on hourly step-wise linear marginal cost functions, too. We find that the increase of social welfare will be 67 billion won in summer if the fixed retail price is changed into the real-time pricing scheme. The total 705 billion won will be transferred from consumer surplus to producer surplus and the rest (67 billion won) will be saved from the reduction of deadweight loss among KEPCO's loss. In winter, the increase of social surplus will be 225 billion won and 1,174 billion won of KEPCO's loss will be transferred from consumer surplus. As a result, we conclude that the regulation of the retail price in the electricity market induces the social welfare loss and KEPCO suffers a huge loss.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.4
• /
• pp.267-276
• /
• 1979

This research was conducted to evaluate tile effects of polluted Suyeong River water on the water quality of Kwangan-Ri bathing beach. The quantity of pollutant loading of Suyeong River was determined in January 1979, and the directions of tidal currents and the chemical constituents of the Suyeong Bay water were observed in May 1979. The results are as follows: The quantity of total pollutant loading which was discharged into Suyeong Bay is: BOD 75.2ton/day; COD 96.9ton/day; SS 20.5ton/day; ammonia-nitrogen 12.4ton/day; nitrate-nitrogen 430kg/day; nitrite-nitrogen 85.1kg/day; phosphate-phosphorus 594kg/day and total heavy metals 3.01ton/day. Considering the tidal current, the polluted waters of Suyeong River flow off the Kwangan-Ri beach during tile ebb tides, and flow into the Kwangan Ri beach during the flood tides. Consequently, the water quality of Kangan-Ri bathing beach is not suitable for bathing.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2008.03a
• /
• pp.79-88
• /
• 2008

Since the hydraulic fracturing field testing method was introduced first to Korean geotechnical engineers in 1994, there have been lots of progresses in a hardware system as well as an interpretation tool. The hydrofracturing system of first generation was the pipe-line type, so it was not easy to handle. It had been modified to a wire-line system at their second generation. It was more compact one but it also needed an additional air-compressor. Our current system is much more compact and operated by all-in-one system, so it doesn't need an additional air-compressor. With a progress in a hardware system, the software for analyzing the in-situ stress regime has also been progressed. For example, the shut-in pressure, which is the most ambiguous parameter to be obtained from hydrofracturing pressure curves, can now be acquired automatically from the various methods. While the hardware and software for hydrofracturing tests are being developed during the last decade, the author could accumulate the field test results which can cover the almost whole area of South Korea. Currently these field data are used widely in a feasibility study or a preliminary design step for tunnel construction in Korea. Regarding the difficulties in a site selection and a test performance for the in-situ stress measurement at an off-shore area, the in-situ stress regime obtained from the field experiences in the land area can be used indirectly for the design of a sub-sea tunnel. From the hydrofracturing stress measurements, the trend of magnitude and direction of in-situ stress field was shown identically with the geological information in Korea.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.6
• /
• pp.731-740
• /
• 2008

This paper deals with the fatigue behavior and strength of a new-type of steel-concrete composite bridge deck. The new-type composite bridge deck consists of corrugated steel plate, welded T-beams, stud-type shear connectors and reinforced concrete filler. A total of eight composite bridge deck specimens were fabricated, the fatigue tests were conducted under four-point bending test with three different stress ranges in constant amplitude. According to the test results, the fatigue crack generated at the welding part of the corrugated steel plate, progressed down to the bottom of the steel plate and encountered the crack, which came out from the opposite side at the same position. After the two cracks were connected at the bottom of the steel plate, the lower flange was cut off and the fatigue crack developed up to the T-beam. And the displacements and strains of fatigue test specimens were increasing with cyclic loading number, these were changed sharply at the fatigue failure. The fatigue results are compared with the design S-N curves specified in the Korea Highway Bridge Design Specifications and data in NCHRP 102 and NCHRP 147 report. The new-type composite bridge deck has a stress category of C, which means that new-type composite bridge deck can be designed by the current fatigue design specifications provided for steel members.

• Journal of Trauma and Injury
• /
• v.25 no.4
• /
• pp.230-240
• /
• 2012

Purpose: We aimed to compare the transport time, the proportion of direct hospital visit and the emergency procedures between the current mountain rescue helicopter emergency medical service (HEMS) and physician-staffed mountain-rescue HEMS. Methods: During weekends from October 2, to November 21, 2010, 9 emergency physicians participated as HEMS staff in the mountain-rescue HEMS program of the Seoul fire department. Patient demographic data, transport time, proportion of direct hospital visits, and emergency procedures were recorded. We also collected data on HEMS mountain-rescued patients from June 1, to September 1, 2010, and we compared them to those for the study patients. After an eight-week trial of the HEMS, we performed a delphi survey to determine the attitude of the physician staff, as well as the feasibility of using a physician staff. Results: Twenty-four(24) patients were rescued from mountains by physician-staffed HEMS during the study period, and 35 patients were rescued during the pre-study period. Patient demographic findings were not statistically different between the two groups, but the transport time and the emergency procedures were. During the study period, the time from call to take-off was $6.1{\pm}4.1min$ (vs. $12.1{\pm}8.9min$ during the pre-study period, p-value=0.001), and the time from call to arrival at the scene was $15.0{\pm}4.8min$ (vs. $22.3{\pm}8.1min$ during the pre-study period, p-value=0.0001). The proportions of direct hospital visit were not different between the two groups, but more aggressive emergency procedures were implemented in the study group. The delphi survey showed positive agreement on indications for HEMS, rapidity of transport and overall satisfaction. Conclusion: A pilot trial of physician-staffed HEMS for mountain rescue showed rapid response and more aggressive performance of emergency procedures with high satisfaction among the attending physicians.