• The Journal of Korea Robotics Society
• /
• v.9 no.4
• /
• pp.216-224
• /
• 2014

This paper compares methods for attitude estimation of a UUV(Unmanned Underwater Vehicle). Attitude estimation plays a key role in underwater navigation using DVL(Doppler Velocity Log). The paper proposes attitude estimation methods using EKF(Extended Kalman Filter), UKF(Unscented Kalman Filter), and CF(Complementary Filter). It derives methods using the measurements from MEMS-AHRS(Microelectromechanical Systems-Attitude Heading Reference System) and DVL. The methods are used for navigation in a test pool and their navigation performance is compared. The results suggest that even if there is no measurement relative to some absolute landmarks, DVL-only navigation can be useful for navigation in a limited time and range.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.07a
• /
• pp.11-12
• /
• 2015

두 선박이 정면에서 마주치며 선박간 상호 통항하거나 상대선을 추월할 경우 각 선박의 선체형상과 선속에 의한 유체력 상호작용에 따른 선박간 간섭력이 발생한다. 선박간 간섭력의 주요한 평가 요소인 횡력과 회두 모멘트의 측정을 통해 두 선박이 근접하였을 때의 위험도와 충돌을 예측할 수 있다. 선행된 간섭력에 관한 연구는 대부분 경험에 의하거나 이론적인 측면에서 관련 연구가 진행되어왔으며, 학계에서 통상적으로 널리 알려진 뉴턴의 연구(1960)에서는 깊은 수심에서 두 선박을 평행하게 항주시켰을 때 선박간 최대 흡인력은 두 선박이 정횡으로 나란하게 위치되는 지점에서 발생하고, 이때의 간섭력은 선속의 제곱에 비례한다고 추정하였다. 현대의 조선기술이 발전함에 따라 선박의 크기는 점점 대형화되고 선박의 운항 효율성 증진을 위한 다양한 선형이 개발되어 실선에 적용되고 있다. 이런 경향에 따라 과거에 비해 현대 선박 운항환경에서의 선박간 간섭은 선박의 크기 및 선형에 의한 영향이 클 것으로 판단된다. 본 연구에서는 선박의 종류별로 대표 선종을 선정하여 두 선박이 정면에서 마주치며 통과하는 운항조건에서의 선속 증가에 따른 선박 상호간 간섭력의 변화를 통상적으로 사용되는 선박조종시뮬레이터를 이용하여 실험 및 분석하여 상관관계를 도출하였다. 선박 유형에 따른 시뮬레이션 실험 결과 최대 횡력은 주로 선미 부근에서 발생하였고 최대 회두모멘트는 선수가 근접할 때 발생하였으며, 선속이 증가할수록 선박 상호간 근접거리가 좁혀졌고 선형별로 각기 다른 선속에서 선미 충돌이 발생하였다. 이 실험연구는 선형에 따른 선박 상호간 근접 시의 횡거리와 통과속력에 대한 기준 설정의 연구 근간을 마련하였고 선박간 교항시 안전운항을 위한 지침이 될 것으로 판단된다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.5
• /
• pp.570-576
• /
• 2015

3D visualization of navigation simulation is to visualize the environment conditions (e.g. nearby ships, dynamic characteristics, environment, terrain, etc) for any users on ships at sea. Realistic 3D visualization enables the users to be immersed to it and guarantees the reliability of the simulation. In particular, terrain visualization contains many virtual objects, so it is time and cost-intensive for object modelling. This paper proposes a 3D terrain visualization method that can be realized in a short time and with low cost by using the Unity 3D development tool. The 3D terrain visualization system requires bathymetric and elevation terrains, and Aids to Navigations (AtoNs) to be realized. It also needs to include 3D visualization objects including bridges, buildings and port facilities for more accurate simulation. Bathymetric and AtoN elements are acquired from ENC, and the elevation element is acquired from SRTM v4.1 digital elevation chart database developed by NASA. Then, the bathymetric and elevation terrains are generated, and the satellite images are superposed by using this terrain information. The longitudinal and latitudinal information of the AtoNs are converted to the 3-axis information to position the AtoN locations. The 3D objects such as bridges, buildings and port facilities are generated and the terrain visualization is completed. The proposed method realizes more realistic 3D terrain visualization of Busan Port.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.87-88
• /
• 2019

Leading Lights and Sector Lights provide a navigable channel, heading reference and a visual indication. Mariners can take easily a reference bearing or line of position. The Busan North Port needed to install a sector light to resolve blind sections because of Busan Port Redevelopment Project D-1 Block Construction Plan. And also the busan new port needed to install a sector light to give safety indication because navigation conditions will be changed due to removal of the to-island. For this reason, design development was made for installation of sector lights. In addition, the results of design development were compared with the AtoN simulation and verified. This paper is expected to be very useful for installing Sector Lights to guide the vessel to port safely in Korea.

• Journal of Digital Contents Society
• /
• v.18 no.4
• /
• pp.769-775
• /
• 2017

The International Maritime Organization's e-Navigation strategy is to introduce new technologies to ships to support easier and safer navigation. With the e-Navigation strategy, various equipment will be installed in vessels and the system structure will be linked to onshore systems. For this reason, a common data structure between systems became necessary, and finally the S-100 standard developed by the International Hydrographic Organization was selected. This paper describes a design of marine casualty data model based on the S-100 standard. The data model of the S-100 standard is designed in the form of a UML class diagram, and the final encoding follows the GML / XML format. We will look at the S-100 standard and product specifications under development, and describe the S-100 standards-based data design and portrayal definition of marine accident data.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.15-19
• /
• 2006

GPS has been increasingly exploited to provide positioning and navigation solutions for a variety of applications. In vessel berthing application, however, there are stringent requirements in terms of positioning accuracy, availability and integrity that cannot be satisfied by GPS alone. This is because the performance of satellite-based positioning and navigation systems are heavily dependent on both the number and the geometric distribution of satellite tracked by receivers. Due to the limited number of GPS satellites, a sufficient number of ‘visible’ satellites cannot be sometimes guaranteed. This paper discusses some issues associated with the implementation of ground-based pseudolite augmentation for vessel berthing. Pseudolite means small transmitter that transmits GPS-like signals in local area. Actually, pseudolite can play three different roles in GPS augmentation scheme, depending on the operational conditions. Firstly, in the case of kinematic GPS operation where there are no signal blockages, and more than five satellites are available, additional pseudolites strengthen the GPS satellite-pseudolite geometry, and more accurate and reliable positioning solution can be achieved. Secondly, in the case when there are adverse GPS operational environments in which the number of tracked satellites is less than four, pseudolites can complement the GPS signals. In the third case, GPS signals are completely unavailable, such as when operated indoor. In such cases the pseudolites can replace the satellite constellation. However, the first role will be considered in this paper, since more than four satellite signals can usually be tracked in most marine applications. This paper presents that the pseudolite-augmented precise positioning system can provides continuous centimeter-level positioning accuracy through comparison analysis of RDOP simulation result of the GPS satellite constellation and the pseudolite-augmented GPS satellite constellation.

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.388-394
• /
• 2018

When a ship is berthing on the pier using a mooring rope, excessive ship speeds may cause accidents where mooring rope is cut off. In order to prevent the mooring rope from breaking, there is need to know the approach speed limit of the ship. The purpose of this study is to estimate the berthing speed limit of a ship to prevent mooring fracture. Focus will be made to when the speed of the ship is unknown. In this study, we propose a method and procedure for estimating the berthing-speed limit based on the theory of ship resistance and the elasticity of the mooring rope. This method was found to be effective as it was observed that the mooring rope cannot be broken when it is estimated that the berthing-speed of a 135K LNG vessel, IWRC, and $6{\times}36$ steel wire mooring rope. The method proposed in this study will significantly contribute to preventing actual accidents related to mooring lines.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.4
• /
• pp.595-602
• /
• 2021

Marine accidents are mostly caused by medium and small ships, and are continuously increasing. In this paper, we propose an architecture of the speech synthesis based automatic safety navigation support service providing system for small ships that equiped onboard systems compared with vessels. The main purpose of the system is to prevent marine accidents by providing synthesized voice safety messages to nearby ships. The safety navigation support service is operated by connecting GPS and AIS to synthesize voice safety messages, automatically broadcast through VHF. Therefore, we developed a data processing module, a staged risk analysis module, a voice synthesis safety message generation module, and a VHF broadcasting equipment control module, which are components of the system. In addition, we conducted laboratory-level and sea-trial demonstration tests using the developed the system, which verified usefulness of the proposed service.

• Journal of Advanced Navigation Technology
• /
• v.12 no.4
• /
• pp.304-310
• /
• 2008

Our ocean where three sides are the seas is the state that the environmental pollution damage is serious because of all kinds of wastes. Therefore, environmental pollution will be considerably decreased if we leans forward in the saddle to manage net which is conquering a section equivalent among wastes and will be helpful to marine ecosystem. This study is to develop a fishing net management system identifying nets cast and withdrawn from the vessel The purpose of FNMS is to manage sailing vessels arrival and departure details in order to manage a net abandoned in the ocean, and restrain the occurrence of the wasted net abandoned without permission in the ocean, and prevent environmental pollution and sailing vessels sank in and around the ocean.

• Journal of Positioning, Navigation, and Timing
• /
• v.2 no.1
• /
• pp.33-40
• /
• 2013

In this paper, GPS signal anomaly generation software is proposed which can be used for the analysis of GPS signal anomaly effect and the design, verification, and operation test of anomalous signal monitoring technique. For the implementation of anomalous signal generation technique, anomalous signals are generated using a commercial signal generation simulator, and their effects and characteristics are analyzed. An error model equation is proposed from the result of analysis, and the anomalous signal generation software is constructed based on this equation. The proposed anomalous signal generation software has high scalability so that users can easily utilize and apply, and is economical as the additional cost for purchasing equipment is not necessary. Also, it is capable of anomalous signal generation based on real-time signal by comparing with the commercial signal generation simulator.