• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.2
• /
• pp.104-113
• /
• 2005

A variety of ergonomic assessment methods of lifting tasks known as a major cause of work-related lower back pain have been used. But there is a limited information in choosing the most appropriate assessment method for a particular job and in finding out strengths and weakness of the methods. The purpose of this study was to assess and compare the ergonomic risks of lifting tasks in a marine diesel engine production industry by three lifting ergonomic assessment tools widely used: the National Institute for Occupational Safety and Health(NIOSH) Revised Lifting Equation(NLE), the Washington Administrative Code 296-62-0517(WAC), and the Snook Tables. Lifting index(weight of load/Recommended Weight Limit) of NLE($LI_{NLE}$) was above 1 at 34 tasks(75.6%) of a total number of 45 lifting tasks. LI of WAC($LI_{WAC}$) was above 1 at 11 tasks(24.4 %). LI of Snook Table($LI_{Snook}$) was above 1 at 29 tasks(64.4%). Thus, LI was high in orders of $LI_{NLE}$ > $LI_{Snook}$ > $LI_{WAC}$. There were significantly high correlations among three Lls(p<0.01). The correlation coefficients between $LI_{NLE}$and the other three Lls($LI_{WAC}$ and $LI_{Snook}$) were r=0.93 and r=0.88, respectively. The linear regression equations were y = 0.444x + 0.11(r=0.93) between $LI_{NLE}$ and $LI_{WAC}$, y = 0.93x + 0.008(r=0.88) between LI(NLE) and $LI_{Snook}$. The LI values by WAC was significantly lower than those by the other tools. The compared features, strength and limitation among these tools were described in this paper.

• Journal of the Ergonomics Society of Korea
• /
• v.27 no.3
• /
• pp.81-92
• /
• 2008

Musculoskeletal disorder (MSD) problems have been increasingly reported in hospital sector but the problems were not addressed with respect to holistic aspects of the target population in Korea. Often, it is required to understand how MSD symptoms are associated with factors such as personal, work environmental and psychosocial stressors. To examine features of association between sets of MSD symptoms and the factors, a questionnaire survey was conducted in a university hospital. A 140-item questionnaire was developed and used for collecting information including factors (e.g., job/occupation, task/activity, job stress) and MSD symptoms. A total of 1,091 workers (male 23.7% and female 76.3%) were finally determined for data analyses. Prevalence rate for the whole body was 72% and, among body parts, the highest was 48.7% for the shoulder, followed by 34.6%(the low back), 32.7%(the leg/foot), 27.9%(the neck), 26.7%(the wrist) and 12%(the elbow). The symptoms were significantly different by job/occupational variable in each of all body parts except the neck. The symptoms were very significantly different by task/activity variables in each of all body parts while those symptoms were significantly different by psychosocial variables, depending on body part and gender. In the logistic regression analyses performed for MSD symptoms by body part and each of 3 factors, odds ratio values varied, ranging from 0.7 to 3.3. The controls for reducing the symptoms were discussed on the basis of the findings. The results show that the MSD symptoms can remarkably vary by the factors and, in particular, can be highly differential for the task/activity factor. This study suggests that MSD symptom features be examined by using various factors and then a higher differential factor be primarily utilized for controling MSD symptoms in general industry including hospital settings.

• Safety and Health at Work
• /
• v.12 no.2
• /
• pp.141-146
• /
• 2021

Background: Violence against health professionals is an increasing problem in Turkey. This study aims to determine the societal perception of violence, experience of violence, and the intentions to use violence against health professionals. Methods: This descriptive study sample comprised 484 individuals. Data were collected by using the "Descriptive Information Form" and "Intentions to Use Violence against Health Professionals Scale." Results: Of the participants, 8.3% used violence against health professionals. Most of the participants (81.2%) stated that violence was not a solution, and 65.9% believed that health professionals did not deserve violence. Past behavior of the participants was the most influential factor on the intention to use violence (β = .473, p = 0.000). Conclusions: More than half of the participants believed that health professionals did not deserve violence and violence was not a solution. We found that intention to use violence was affected by past experiences.

• Safety and Health at Work
• /
• v.6 no.3
• /
• pp.174-183
• /
• 2015

The major purpose of this study is to construct a retrospective exposure assessment for benzene through a review of literature on Korea. Airborne benzene measurements reported in 34 articles were reviewed. A total of 15,729 individual measurements were compiled. Weighted arithmetic means [AM(w)] and their variance calculated across studies were summarized according to 5-year period intervals (prior to the 1970s through the 2010s) and industry type. Industries were classified according to Korea Standard Industrial Classification (KSIC) using information provided in the literature. We estimated quantitative retrospective exposure to benzene for each cell in the matrix through a combination of time and KSIC. Analysis of the AM(w) indicated reductions in exposure levels over time, regardless of industry, with mean levels prior to the 1980-1984 period of 50.4 ppm (n = 2,289), which dropped to 2.8 ppm (n = 305) in the 1990-1994 period, and to 0.1 ppm (n = 294) in the 1995-1999 period. There has been no improvement since the 2000s, when the AM(w) of 4.3 ppm (n = 6,211) for the 2005-2009 period and 4.5 ppm (n = 3,358) for the 2010-2013 period were estimated. A comparison by industry found no consistent patterns in the measurement results. Our estimated benzene measurements can be used to determine not only the possibility of retrospective exposure to benzene, but also to estimate the level of quantitative or semiquantitative retrospective exposure to benzene.

• Journal of the Korean Society of Safety
• /
• v.18 no.3
• /
• pp.88-93
• /
• 2003

The Process Safety Management (PSM) by the Law of Industry, Safety and Health has been performed for preventing major accidents of chemical plants since 1996. In terms of preventing chemical accidents more precisely, it is essential to develop a tool for quantitative risk assessment. For this, KOSHA (Korea Occupational Safety and Health Agency) developed an Integrated Risk Management System (IRMS). The system is designed to assimilate data on chemical plant hazards from external database, to integrate these data with location information(topographic and demographic), and to make them user-friendly accessible. The system consists of several main functions: display of five major Korean petrochemical complex layout display of equipment layout with its information utilizing the external database, zonation of the hazard effected area with consequence analyses, the most probable accident scenario generation, accident/incident database and calculation of frequency of accident using equipment reliability database, etc. The highlight of IRMS is to provide the risk contours using GIS(Geographical Information System) technology. IRMS is intended to manage hazardous installation more systematically and effectively, to reduce the number of accident remarkably, further minimizing production loss in the plant. The system is now under application to about 500 PSM sites as well as and emergency authorities in Korea by KOSHA (Korea Occupational Safety and Health Agency)

• Environmental Analysis Health and Toxicology
• /
• v.31
• /
• pp.11.1-11.6
• /
• 2016

Objectives A hazard assessment of di(2-ethylhexyl) phthalate (DEHP), a commonly used workplace chemical, was conducted in order to protect the occupational health of workers. A literature review, consisting of both domestic and international references, examined the chemical management system, working environment, level of exposure, and possible associated risks. This information may be utilized in the future to determine appropriate exposure levels in working environments. Methods Hazard assessment was performed using chemical hazard information obtained from international agencies, such as Organization for Economic Cooperation and Development-generated Screening Information Data Set and International Program on Chemical Safety. Information was obtained from surveys conducted by the Minister of Employment and Labor ("Survey on the work environment") and by the Ministry of Environment ("Survey on the circulation amount of chemicals"). Risk was determined according to exposure in workplaces and chemical hazard. Results In 229 workplaces over the country, 831 tons of DEHP have been used as plasticizers, insecticides, and ink solvent. Calculated 50% lethal dose values ranged from 14.2 to 50 g/kg, as determined via acute toxicity testing in rodents. Chronic carcinogenicity tests revealed cases of lung and liver degeneration, shrinkage of the testes, and liver cancer. The no-observed-adverse-effect level and the lowest-observed-adverse-effect level were determined to be 28.9 g/kg and 146.6 g/kg, respectively. The working environment assessment revealed the maximum exposure level to be $0.990mg/m^3$, as compared to the threshold exposure level of $5mg/m^3$. The relative risk of chronic toxicity and reproductive toxicity were 0.264 and 0.330, respectively, while the risk of carcinogenicity was 1.3, which is higher than the accepted safety value of one. Conclusions DEHP was identified as a carcinogen, and may be dangerous even at concentrations lower than the occupational exposure limit. Therefore, we suggest management of working environments, with exposure levels below $5mg/m^3$ and all workers utilizing local exhaust ventilation and respiratory protection when handling DEHP.

• Safety and Health at Work
• /
• v.15 no.2
• /
• pp.139-146
• /
• 2024

Background: This research suggested a method for evaluating health and safety performance as a combination of reactive and active monitoring. Methods: A number of Freedom of Information requests (FoI) were sent to the Health and safety Executive (HSE) and 100 UK universities. Data on the number of reportable incidents, diseases and dangerous occurrences were compiled for UK universities and combined with the Impact Ranking for good health and well-being. A semi-structured survey was used to identify best H&S practices. Subsequently, the effect of workers' involvement in H&S management on RIDDOR and near-miss reports, was investigated using statistical analysis. Results: A ranking of UK universities that perform highly in Health and Safety (H&S) was assembled and selected universities were contacted to identify best practices. Best practices were divided into three categories: team management, roles and responsibilities, and H&S performance monitoring. One of the findings demonstrated a reverse dependence between provision of a refresher training in risk assessments and a number of reported RIDDOR incidents. Conclusion: Health and Safety professionals in the universities may find it useful to reflect on these findings and the identified best practices in order to improve the H&S performance in their own organisations.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.8
• /
• pp.83-90
• /
• 2021

In this paper, effects on industrial accident prevention based on better safety and health environment by utilizing ergonomics expert were studied. This study was mainly based on the data from 'the survey for occupational safety and health trend' conducted by Occupational Safety and Health Research Institute. The number of industries participated in the survey was 2,084. Main results of the study were as follows; 1) Only 22.9% of the industries participated in the survey utilized ergonomics expert. The rest of the industries have never had an ergonomics expert due to the reasons such as lack of knowledge for the field of ergonomics, etc. 2) Specific activities done by the industries with ergonomics expert in order to have better safety & health were 'providing work orders'(94.8%), 'providing monitoring guidelines'(85.5%), 'providing information for dangerous work'(95.8%), 'providing safety education'(96.6%), and 'other safety management'(94.1%). 3) When the odds ratio for the levels of communication and the levels of environmental stability regarding safety & health for the different groups(with experts and without experts), it was found that the group with ergonomics experts had a significant higher ORs(2.391, 95% confidence interval(1.949-2.932) and 2.128, 95% confidence interval(1.786-2.537)) respectively than those of the industries without ergonomics expert. The results suggested that ergonomics expert has been unique in most of time in terms of his/her contributions in the field of industrial safety and health.

• Korean Journal of Occupational Health Nursing
• /
• v.25 no.1
• /
• pp.65-74
• /
• 2016

Purpose: The purpose of this study is to predict industrial accident rate using time series analysis. Methods: The rates of industrial accident and occupational injury death were analyzed using industrial accident statistics analysis system of the Korea Occupational Safety and Health Agency from 2001 to 2014. Time series analysis was done using the most recent data, such as raw materials of Economically Active Population Survey, Economic Statistics System of the Bank of Korea, and e-National indicators. The best-fit model with time series analysis to predict occupational injury was developed by identifying predictors when the value of Akaike Information Criteria was the lowest point. Variables into the model were selected through a series of expertises' consultations and literature review, which consisted of socioeconomic structure, labor force structure, working conditions, and occupational accidents. Results: Indexes at the meso- and macro-levels predicting well occurrence of occupational accidents and occupational injury death were labor force participation rate for ages 45-49 and budget for small scaled workplace support. The rates of industrial accident and occupational injury death are expected to decline. Conclusion: For reducing industrial accident continuously, we call for safe employment policy of economically active middle aged adults and support for improving safety work environment of small sized workplace.

• Journal of Applied Reliability
• /
• v.15 no.3
• /
• pp.181-191
• /
• 2015

Change in labor time is affecting occupational safety and health. Recently reduction in labor time brought innovational operation method, investment in plant and equipment, and flexible labor time in some companies, thereby affecting working conditions for labourers. However, working conditions for some vulnerable social groups have deteriorated. As a result, they are becoming more exposed to risk factors such as injury and emotional stress. In this study we use 2014 KWCS data in order to find the social and demographic characteristics in Korean working conditions. To this end, we use exploratory data analysis approach to find the relationship between some of the important variables in the KWCS data. We also use Press-State-Response model to find which group of people are vulnerable to Press and State. We find that women, people over age 50 and business owners are more vulnerable to Press and State than men, people below age 50 and wage workers.