• 한국안전학회지
• /
• 제34권3호
• /
• pp.83-88
• /
• 2019

The 7,993 cases of Survey Report of Fatal Industrial Accidents conducted jointly by the MEOL and the KOSHA for the recent seven years(2007-2013) were categorized according to personal and occupational characteristics, industry types, business sizes, job types, activities at the time accident, types of accidents, material agents(assailing materials), unsafe conditions, and unsafe acts. And it is found that among the 72.2 percent of fatal occupational accidents in the construction and manufacturing industries are caused by falling, sticking, bumping and being caught under objects & overturning. For this study, through the empirical analysis on causes of fatal industrial accidents, was used to identity high risk groups based on total data of 7,993 victims of occupational accidents. An annual fatal occupational injury (FOI) rate per 10,000 workers was about 0.47‱. The middle-aged group and the elderly group showed the highest FOI rates per 10,000 workers (0.73‱, 0.80‱), and the daily workers showed the highest FOI rate (1.46‱), and the craft and related trades workers showed the highest FOI rate (2.17‱). In case of industry type the mining industry (7.26‱) showed the highest FOI rate, followed by the sewerage, waste management, materials recovery and remediation activity industry (3.91‱) and the construction industry (2.71‱). The primary high risk target group that requires a strategy designed to reduce fatal occupation injuries caused by falling and bumping & contact(collision) is the construction industry, and the secondary high risk target group in the construction industry is classified as the equipment, machine operating and assembling workers in the construction industry, those aged 50 years old and above need the prevention measures against bumping & contact(collision) and being caught under an object & falling(objects), while those aged less than 50 years old need prevention measures against falling(persons).

• 한국산업보건학회지
• /
• 제33권1호
• /
• pp.6-11
• /
• 2023

Objective: This study was conducted to identify the cause of suffocation accident. Methods: We analyzed the components of zinc concentrates by ICP-OES (inductively coupled plasma optical emission spectroscopy) and tested the oxygen consumption by zinc concentrates in a 13.2-liter closed chamber. Results: Zinc, sulfur and iron were the main components of the four types of zinc concentrates, and accounted for 76~89% by weight. Zinc concentrates (0.5 or 0.927 kg) depleted the oxygen concentration from 20.9% to 7.4~18.9% during seven days. The rate of oxygen consumption was in the range of 3.0~11.0 mM/day·kg-sample at 21~24℃ and around 95% of free air space within the closed chamber. Conclusion: Since zinc concentrate consumes oxygen in a confined space, measures should be taken to prevent suffocation accident (such as ventilation and monitoring of oxygen concentration).

• 한국산업보건학회지
• /
• 제15권2호
• /
• pp.114-123
• /
• 2005

We analyzed the demographic and job features of 197 shipyard workers with work-related musculoskeletal disorders(WMSDs) compensated by the Industrial Accident Compensation Insurance Act, and the features of the disorders, the causes of operation and the induced behaviors. The three shipbuilding companies surveyed were located in Busan Metropolitan city and Gyungsangnam-do. The results were as follows. 1. The ages of WMSDs patients in shipyard were $43.6{\pm}8.6$ and the job tenure was $14.3{\pm}5.6$. The 40's of them was 40.1%, and the 30's was 29.4%. Patients less than 5 year-work duration were 85.3%, and ones more than 16 year-work duration 6.6%. In occupations, welders were 32.5%, pre-welders 17.3%, and setting engineers 6.6%. 2. The causes of WMSDs in shipyard were works(95.4%) and outer crash or accident shock (3.6%). Based on the standard of the NIOSH induced behaviors, the causes were awkward posture (62.9%), excessive movement(19.3%) and repetitive movement(13.7%). 3. The compensated WMSDs by body part was the highest, 36%, in the spines, 32.0% in both the upper limbs and the spines, and 14% in the upper limbs. The number of cases of WMSDs in body were 96 in the cervical, 79 in the lumbar and 72 in the shoulders. 4. As a result of chi-square test(${\chi}^2$) between diagnosis and operation in body, welding and spot welding had the most diagnoses in all parts of the body among other occupations. Chi-square test(${\chi}^2$) between diagnosis and induced behavior in body showed that awkward postures recorded the highest rate and repetitive movements was the second. 5. The most hazardous occupation was the welding(incidence rate=9.7) and the most hazardous behavior was the awkward posture.

• 대한안전경영과학회지
• /
• 제18권2호
• /
• pp.19-27
• /
• 2016

Safety accident rate of small-medium construction site is high. because of lack of safety management system, lack of safety management capacity, lack of investment for safety, Owner's insufficient awareness about safety. In order to improve this, Currently in Occupational Safety and Health Act, Construction site of amounts more than 300 million won less than 120 billion (architectural),150 billion won(civil) mandatory subject to the technical guidance on construction accident prevention. Context of construction accident causes with construction accident rate relationship analysis and case analysis of technical guidance, through a survey of stakeholders in the technical guidance drawn the problems of the construction accident prevention technical guidance system and ways to improve on this.

• 한국산업보건학회지
• /
• 제28권4호
• /
• pp.416-424
• /
• 2018

Objective: The objective of this study was to estimate the numbers of employees occupationally exposed to noise according to their industry and size. Methods: A Delphi panel consisting of 15 occupational health experts estimated the exposure prevalence of noise in workplace. Data on Industrial Accident Compensation Insurance provided from Occupational Safety and Health Research Institute were combined to produce the exposure population. Results: In Korea, 16.0% of employees, 2,539,890 out of 15,838,926, was estimated to exposed to noise occupationally. The rate was 32.7% and 10.3% in manufacturing sector and non-manufacturing sector, respectively. The highest rate, 52.5%, was found in manufacturing industries of wood and of products of wood and cork(except furniture) and of other transport equipment. Sorted by their size of business, the rate was higher as the number of employee was larger in manufacturing sector. Conclusions: Compared to the same rate estimated in the US, 17.2%, the result of this study seems to be in a resonable range.

• 한국건설관리학회논문집
• /
• 제22권1호
• /
• pp.47-54
• /
• 2021

한국산업안전보건공단의 산업재해통계 보고서 최근 4년 동안의 자료를 확인하면 2017년부터 2020년 6월까지 건설현장의 재해자 수가 약 93,158명, 사망자 수가 약 1,977명으로 건설업이 재해율 총 3위, 사망률 총 1위로 높은 안전사고 추이를 보이고 있다. 그 중에서도 전체 직업군에서 추락으로 인한 사망사고 및 접촉으로 인한 사망사고는 전체 사고 유형 중 3위 안으로 빈번하게 발생하는 안전사고이다. 본 논문은 건설현장의 다양한 유형의 안전사고 중 발생 비율이 가장 높은 추락과 접촉 사고 두 유형의 안전사고를 예방하기 위해 초음파 센서를 이용한 스마트 감지 장치를 개발하여 직접 현장 작업자가 경험하게 한 결과, 설문참여 작업자의 69.5%이상이 센서의 현장 적용성에 대해 긍정적으로 평가하였으며, 이를 토대로 건설업 안전사고의 전체 비율을 감소하는데 일조 하고자 한다.

• 한국환경보건학회지
• /
• 제39권4호
• /
• pp.346-353
• /
• 2013

Objectives: The goal of this study is to identify the distribution of the foliar fluorine content of vegetation surrounding the area where hydrofluoric acid was accidently released in Gumi, Gyeongsangbuk-do on September 27, 2012. In addition, it also aims to estimate the concentration of hydrogen fluoride in the air on the day of the accident. Methods: Samples of plant leaves were collected on October 7, 2012 within 1 km from the site where the accident occurred. These samples were analyzed for soluble fluorine ion with an ion selective electrode. The ambient concentration of hydrogen fluoride was calculated using the fluoride content in the plant via the dose-rate equation (${\Delta}F$=KCT). Results: The arithmetic and geometric means of the concentrations were 2158.2 and 1183.7mg F $kg^{-1}$ for leaves and, 2.4 and 1.1 ppm HF for the air, respectively. The highest concentration of hydrogen fluoride in the air was 14.7 ppm, which is higher than the maximum concentration reported by the government (1 ppm) and the exposure limit (ceiling, 3 ppm). The concentrations of both fluorine and hydrogen fluoride decreased with increasing distance from the accident site and showed a significant decrease outside of a 500m radius from the site (p <0.05). Conclusions: The area around the accident site was highly polluted with hydrogen fluoride according to the results of this study. Considering the persistency of hydrogen fluoride in the environment, long-term monitoring and environmental impact assessment should be pursued.

• 대한안전경영과학회지
• /
• 제16권3호
• /
• pp.195-200
• /
• 2014

Occupational fatal injury rate per 10,000 population of Korea is still higher among the OECD member countries. To prevent fatal injuries, the causes of accidents including human error should be analyzed and then appropriate countermeasures should be established. There was an severe converter furnace accident resulting in five people death by chocking in 2013. Although the accident type of the furnace accident was suffocation, many safety problems were included before reaching the death of suffocation. If the safety problems are reviewed throughly, the alternative measures based on the review would be very useful in preventing similar accidents. In this study, we investigated the converter furnace accident by using human error analysis and accident scenario analysis. As a result, it was found that the accident was caused by some human errors, inappropriate task sequence and lack of control in coordinating work by several subordinating companies. From the review of this case, the followings are suggested: First, systematic human error analysis should be included in the investigation of fatal injury accidents. Second, multi man-machine accident scenario analyis is useful in most of coordinating work. Third, the more provision of information on system state will lessen human errors. Fourth, the coordinating control in safety should be performed in the work conducting by several different companies.

• 한국안전학회지
• /
• 제25권6호
• /
• pp.47-52
• /
• 2010

Many industrial accidents have occurred over the years in the manufacturing and construction industries in Korea. However, as the service industry has increased continuously, the share of the accident rate in the service industry was 39.07% in 2009, while the manufacturing industry share was 33.73%. The service industry share overtook the manufacturing industry share for the first time. Therefore, this research considers prevention of industrial accidents in the service industry as well as manufacturing and construction industries. This paper describes a procedure and a method to estimate efficient accident rate forecasting and estimated zero accident time in the service industry in order to prevent industrial accidents in the transportation, storage, and telecommunication divisions. This paper proposes a model using an analytical function for the sake of very efficient accident rate forecasting. Accordingly, this paper has develops a program for accident rate forecasting, zero accident time estimating, and calculation of achievement probability through MFC (Microsoft Foundation Class) software Visual Studio 2008 in the transportation, storage, and telecommunication divisions. In results of this paper, ARIMA (Auto Regressive Integrating Moving Average) is regarded as a very efficient forecasting model for the transportation, storage, and telecommunication division. In testing this model, value minimizing the Sum of Square Errors (SSE) was calculated as 0.2532. Finally the results of this paper are sure to help establish easy accident rate forecasting and strategy or method of zero accident time in the service industry for prevention of industrial accidents.

• 한국안전학회지
• /
• 제33권2호
• /
• pp.14-20
• /
• 2018

In this study, we analyze the current status of major disasters in distribution works and propose safety measures through the distribution live-line work method and electric shock risk assessment. The result of analyzing the ratio of electric shocks to the occurrence of industrial accidents in the recent 13 years shows that the death rate is higher than other industries, especially the construction industry occupying most of the disaster, and it is higher than the collapse disaster. We analyze statistic data of 101 victims selected as core words of live work, distribution line, pole and 22.9 kV in the investigation report of major accident of electric shock fatal from 2001 to 2014. The safety measure was established through the risk assessment of the distribution method using the standard model of the risk assessment based on the results of electric shock analysis on the distribution line. In order to prevent the electric shock accident which is recently being discussed, the risk assessment procedure were carried out in the above-mentioned 22.9kV special high voltage live-line operation method. We derived the risk reduction plan for the distribution line from the results of the major accidents statistic and demonstration of the line works.