• The korean journal of orthodontics
• /
• v.25 no.3 s.50
• /
• pp.247-261
• /
• 1995

The purpose of this study was to quantitate differences in the nature of the correction of Angle's Class II div 1 malocclusion dependent on the patient's age at the time of treatment. The sample consisted of 27 female patients in the adolescent group with a mean initial records age of 11.8 years and 25 female patients in the adult group with a mean starting age of 21.1 yrs. Lateral cephalometric head films were taken before and after orthodontic treatment with four bicuspid extraction. The results were obtained as follows. 1. None of maxillary skeletal parameters exhibited a significantly different in treatment change between adolescents and adults. But, in mandibular skeletal measurements, there were significant differences between two groups. (P<0.05) 2. Measures of vertical dimension in the adults remained unchanged during treatment, reflecting the effective absence of growth. 3. The steepness of occlusal plane in the adults changed significantly.(P<0.05) In contrast, the adolescents displayed stability of the occlusal plane. 4. According to the Johnston analysis, there was a significant difference in the total molar correction between two groups.(P<0.05) 5. According to the Johnston analysis, differential mandibular growth in the adolescents contrubuted $63\%$ of the total molar correction, with orthodontic tooth movement accounting for the remaining $37\%$. In the adults, dental movement comprised $99\%$ of the correction.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.439-447
• /
• 2019

The distance between the natural teeth and the implants is an important factor in preserving the periodontal tissues and esthetics. And abnormal positional displacement and tilting of the teeth during restorative procedure may require intentional root canal treatment and may affect masticatory function. This report is to present a successful full mouth rehabilitation of a patient with uneven dentition and collapsed occlusion using orthodontic and implant treatment. The patient had no symptoms or discomfort of temporomandibular joint disorder such as pain or sound. The orthodontic treatment was continued until implant provisional prosthesis delivery. And the vertical height of occlusion was elevated 2mm on anterior basis for anterior teeth protection and esthetics. After the orthodontic treatment, the implant abutments and natural teeth were finally restored with porcelain-fused-to-metal crowns and bridges. Satisfactory function and esthetic outcomes are observed after 6months of follow up.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.1
• /
• pp.19-25
• /
• 2015

Nowadays, CAD/CAM is broadly used in dentistry for inlays, crowns, implant abutments and its spectrum is expanding to complete dentures. Utilizing CAD/CAM to fabricate complete dentures is expected to decrease chair time and the number of visits, thus decreasing total fabrication time, expenses and errors caused during fabrication processes. One of the systems using CAD/CAM, DENTCA$^{TM}$ CAD/CAM denture (DENTCA Inc. Los Angeles, USA) scans edentulous impressions, designs dentures digitally, fabricates try-in dentures by 3D printing and converts them into final dentures. Patients can wear final dentures after only 2 - 3 visits with satisfying adaptation. This case report introduces a 71-year-old male patient who visited to consult remaking of existing old dentures. Residual teeth with bad prognosis and root remnants were extracted and the patient used reformed existing mandibular denture for 2 months. And then DENTCA system started. One-step border molding was done using conventional tray of adequate size provided by DENTCA system and wash impression was taken. Gothic arch tracing was completed based on the vertical dimension of existing dentures. Both maxillary and mandibular trays were placed to the resultant centric relation and bite registration was taken. Then DENTCA scanned the bite registration, arranged the teeth, completed the festooning and fabricated the try-in dentures by 3D printing. The try-in dentures were positioned, occlusal plane and occlusal relations were evaluated. The try-in dentures were converted to final dentures. To create bilateral balanced occlusion, occlusal adjustment was done after clinical remounting using facebow transfer. The result was satisfactory and it was confirmed by patient and operator.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.2
• /
• pp.226-232
• /
• 2010

Incidence of tooth impaction varies from 5.6 to 18.8% of the population. Failure of eruption of the first and second permanent molars is rare; the prevalence in the normal population is 0.01% in case of the first permanent molar, and 0.06% in case of the second permanent molar. Permanent molars are particularly important for providing sufficient occlusal support and co-ordinating facial growth. Failure of eruption of permanent molars may result in various complications such as decrease in vertical dimension, posterior open bite, extrusion of antagonistic teeth, resorption and inclination of adjacent teeth, formation of cyst and so on. Treatment options of impacted teeth are periodic observation, surgical exposure, surgical exposure with subluxation, orthodontic relocation, and surgical extraction before prosthetic treatment. Early diagnosis and treatment are important, because delayed treatment induces various problems such as decreased spontaneous eruptive force, decreased successful percentage, increased treatment period, increased various complications. Prevalence of the failure of mandibular first molars is rare but eruptive guidance before extraction of impacted teeth is necessary due to importance of permanent molars. We reported two cases of surgical exposure of impacted mandibular first molar. In these cases, we could observe different result of the impacted mandibular first molar after surgical exposure.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.6
• /
• pp.628-635
• /
• 2000

The purpose of this study was to evaluate the result after 2-phase surgical-orthodontic treatment without preoperative orthodontic treatment for the skeletal Cl III malocclusion patient and to obtain an adequate protocol on the bases of this result. This retrospective study of ten patients who underwent 2-phase treatment were done to evaluate 1) the surgical stability and relapse pattern 2) the facial esthetics 3) the TMJ problem 4) the total time of the treatment. Results were followed : 1) The horizontal relapse of the mandible was 26.8% and didn't show significant differences compared to the conventional 3-phase treatment. But, it was considered that this amount of relapse was the sum of true relapse and autoratation of mandible due to decreased vertical dimension during orthodontic treatment. 2) It was estimated that there's no difference on the ratio of anterior facial height between the subjects and the normal patients. On the horizontal analysis, the mandible of the subjects was located more anteriorly than that of the normal patients. This result showed that there was a need for the accurate preoperative esthetic evaluation and the additional methods for reducing the relapse due to the occlusal interference. 3) Wide variation was noted on the TMJ symptoms of the subjects, however, it was estimated that there's no significant differencees of symptoms compared to that of the conventional 3-phase treatment on literatures. 4) The average of the overall period of treatment was 20.8 months and we obtained reduction of the treatment time compaired to 3-phase treatment on many literatures. Most of the results of this study were similar to the findings of the 3-phase treatment(preoperative orthodontic-orthognathic surgery-postoperative orthodontic), but total time of the treatment was shorter in patients with 2-phase treatment than in those with the conventional 3-phase treatment. With 2-phase treatment, we experienced many advantages compared to the conventional method considering that it was favarable conditions for the teeth, it had the flexibility for the treatment, and it could be the adequate treatment approach for the stomatognathic system. Although this retrospective pilot study had some limitations, due to small samples, the authors would hope that it could serve as a guide for the future researches, and the clinical applications.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.4
• /
• pp.410-418
• /
• 2017

Amelogenesis imperfecta characterized as abnormally formed enamel is caused by a defect of unique group of genes. Patients affected by this disease might have difficulties in social and psychological aspects due to non-esthetic teeth as well as functional problems caused by enamel detachment and tooth wear from their early ages. Adult patients with amelogenesis imperfecta can be treated with full-mouth restorations, which make functional and esthetic rehabilitations of severely worn tooth. However, the anterior open bite and lack of occlusal clearance for posterior teeth restorations due to compensatory extrusion are the intervening factors in the prosthetic treatment. Therefore, the determination of anterior tooth lengths, vertical dimension, and anterior guidance should be set carefully. Recently, computer-aided design and computer-aided manufacturing (CAD/CAM) techniques help systematic approaches and enable dentists to reduce time-consuming procedures in the diagnosis and treatment of full-mouth rehabilitation. This case report demonstrates the successful full mouth rehabilitation using a CAD/CAM system in a young adult patient with amelogenesis imperfecta and anterior open bite.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.3
• /
• pp.218-226
• /
• 2018

In partial edentulous patients, implant-assisted removable partial denture which provide additional retention and support by placing a small number of implants in strategic positions might be suitable treatment. This case of patient with loss of maxillary posterior teeth and moderate to severe wear of residual dentition, three implants were placed in the maxillary anterior edentulous area and then surveyed bridges were made including remaining anterior natural teeth. Posterior edentulous area was restored with distal extension removable partial denture (RPD). In addition, the worn mandibular natural teeth were restored with fixed prostheses. As a result, reduced vertical dimension and collapsed occlusal plane were rehabilitated, and improved functionally and aesthetically. The purpose of this case was to report the results of three-year follow-up of full mouth rehabilitation with anterior implant surveyed bridges and distal extension RPD.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.31 no.3
• /
• pp.253-261
• /
• 2015

Chronic periodontitis involves subsequent loss of teeth, and if left untreated, can lead to adjacent teeth drifting and supraeruption of the rest dentition. Careful consideration has to be given when deciding extraction of remaining teeth in treatment of periodontally compromised dentitions. For tooth-supported fixed partial dentures or removable partial dentures, periodontally compromised teeth are extracted due to possible early failure from functional overload, but for implant restoration, the teeth could be used as supports for fixed partial dentures because implants can reduce overload on teeth. The remaining natural teeth can help clinicians restoring vertical dimension and normal occlusal plane in full mouth rehabilitation because it conserves patients' proprioceptive response. This clinical report describes treatment of a patient who has a few remaining teeth and supraeruption of the rest dentition from severe chronic periodontitis. Satisfactory clinical result was achieved with full mouth rehabilitation using a few teeth and implants.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.2
• /
• pp.202-210
• /
• 2022

Recently with the advance in digital dentistry, the fabrication of dentures using computer-aided design and computer-aided manufacturing (CAD-CAM) is on the rise. The denture designed through a CAD software can be produced in a 3-dimensional manufacturing process. This process includes a subtractive processing method such as milling and an additive processing method such as 3D printing and in which it can be applied efficiently in more complex structures. In this case, complete dentures were fabricated using Stereolithography (SLA)-based 3D printing to shorten the production time and interval of visits in patient with physical disabilities due to cerebral infarction. For definitive impression, the existing interim denture was digitally replicated and used as an individual tray. The definitive impression obtained with polyvinyl siloxane impression material was including information about the inclination and length of the maxillary anterior teeth, vertical dimension, and centric relation. In addition, facial scan data with interim denture was obtained so that it can be used as a reference in determination of the occlusal plane and in arrangement of artificial teeth during laboratory work. Artificial teeth were arranged through a CAD program, and a gingival festooning was performed. The definitive dentures were printed by SLA-based 3D printer using a FDA-approved liquid photocurable resin. The denture showed adequate retention, support, and stability, and results were satisfied functionally and aesthetically.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.2
• /
• pp.125-134
• /
• 2023

When the patient with class III malocclusion needs extensive oral rehabilitation due to multiple missing teeth, accurate diagnosis, and careful analysis, such as the patient's occlusal relationship, facial changes, and evaluation of the temporomandibular joint are essential. Orthognathic surgery is often performed for aesthetic improvement, depending on the patient's chief complaint. If it is not possible due to certain circumstances, partial aesthetic improvement can be achieved through minimal elevation of the vertical dimension. As this patient may have unexpected issues, such as temporomandibular joint disorder, oral habits like bruxism, and masticatory muscle tension, it was determined whether the patient could adjust to a reversible temporary removable partial denture. After this, the maxillary implant-supported fixed prostheses and the mandibular fixed prostheses were used to achieve stable posterior support and to partially improve the maxillary anterior esthetics. The patient was satisfied with the results both aesthetically and functionally. The prognosis is expected to be good if regular check-ups are conducted.