• 대한치과보철학회지
• /
• 제33권2호
• /
• pp.231-239
• /
• 1995

When the complete denture is made, the record base for jaw relation is divided into temporary record base and permanent record base. However, The temporary record base include some disadvantages such as, the lackness of intimate contact between model and base, the lackness of retention during the jaw relation registration, When we obtained jaw relation the permanent record bases made from heat curing resin were utilized. We could get several advantages as follows : 1. The permanent record base provided intimate contact between the model and record base. 2. In fabricating occlusal rim on record base, the dimensional change of record base was little because the permanent record base was lesser influenced to thermal change of occlusal rim than the temporary record base. 3. At the stage of jaw relation, the retention of final denture could be early checked. 4. It could be able to get more accurate registration of jaw relation because all procedure were done on the same base during the jaw relation, artificial teeth arrangement, try-in, and final denture construction. 5. Although there was an inconvenience due to double curing procedure, the shrinkage rate in resin polimerization was relatively reduced so that more dimensional stability could be taken.

• 대한치과보철학회지
• /
• 제51권3호
• /
• pp.199-207
• /
• 2013

연구 목적: 저작 및 하악 운동시 발생되는 치아접촉은 치열의 보존, 하악의 안정과 보철 수복과정에 있어서 중요하다. 이에 한국인의 20-30대 성인을 대상으로 최대교두감합위에서의 치아접촉점의 위치 및 교합유도양상과 교합유도치의 분포를 분석하여 알아보고자 한다. 연구 대상 및 방법: 29명의 성인을 대상으로 하악의 최대교두감합위에서의 치아접촉점의 위치와 분포 및 전방운동시 교합접촉양상을 shimstock foil (Whaledent, Langenau, Germany), T-Scan III (Tekscan Inc., Boston, MA, USA), polyvinylsiloxane registration material (Genie Bite, Sultan Healthcare, Hackensack, NJ, USA)을 이용하여 측정하였다. 측정시 자세는 직립위로 Frankfurt horizontal plane과 지면이 수평이 되도록 앉게 하였으며 접촉이 재현될 때까지 수 차례 반복한 후 3회씩 측정하였다. 최대교두감합위에서 세가지 방법 간의 통계적 유의성을 비교하기 Fisher's Exact Test (R-General Public License, ver. 2.14.1)를 이용하였고, 전방 운동시 Pearson's Test를 통해 통계 검증하였다(${\alpha}=.05$). 결과: 최대교두감합위에서의 치아 접촉 양상을 shimstock foil, T-Scan III, polyvinylsiloxane registration material로 측정시 전치부, 소구치부, 구치부 모두에서 접촉하는 경우가 대부분이었으며, shimstock 사용시 약51%의 최대교두감합위는 전치부 접촉에서 일어났다. Shimstock foil과 T-Scan III를 사용하여 전방운동 측정시 중절치의 접촉이 가장 많이 일어났다. 결론: 최대교두감합위에서 실제 모든 치아의 접촉이 이루어지지 않는 경우가 있었으며 따라서 구치부에서 전치부를 보호해 주고 있음을 확인할 수 있었다. 또한, 전방운동 시 전치부의 치아접촉은 과도한 구치부의 치아접촉을 방지해 전치부가 구치부를 보호해 주고 있었다. 따라서 교합 재구성 시에는 이러한 상호 보호 교합에 대한 고려가 필요하다.

• The Journal of Advanced Prosthodontics
• /
• 제4권1호
• /
• pp.7-12
• /
• 2012

PURPOSE. Articulation paper mark size is widely accepted as an indicator of forceful tooth contacts. However, mark size is indicative of contact location and surface area only, and does not quantify occlusal force. The purpose of this study is to determine if a relationship exists between the size of paper marks and the percentage of force applied to the same tooth. MATERIALS AND METHODS. Thirty dentate female subjects intercuspated into articulation paper strips to mark occlusal contacts on their maxillary posterior teeth, followed by taking photographs. Then each subject made a multi-bite digital occlusal force percentage recording. The surface area of the largest and darkest articulation paper mark (n = 240 marks) in each quadrant (n = 60 quadrants) was calculated in photographic pixels, and compared with the force percentage present on the same tooth. RESULTS. Regression analysis shows a bi-variant fit of force % on tooth (P<.05). The correlation coefficient between the mark area and the percentage of force indicated a low positive correlation. The coefficient of determination showed a low causative relationship between mark area and force ($r^2$ = 0.067). The largest paper mark in each quadrant was matched with the most forceful tooth in that same quadrant only 38.3% of time. Only 6 2/3% of mark surface area could be explained by applied occlusal force, while most of the mark area results from other factors unrelated to the applied occlusal force. CONCLUSION. The findings of this study indicate that size of articulation paper mark is an unreliable indicator of applied occlusal force, to guide treatment occlusal adjustments.

• 대한치과의사협회지
• /
• 제22권10호통권185호
• /
• pp.869-877
• /
• 1984

An objective examination of 123 subjects aged from 19 to 23 was made from a clinical standpoints to determine the natural occurrence in anterior tooth contact in centric occlusion, and tooth contact in protrusive occlusion, left and right lateral excursions, and temporomandibular dysfunction. 1. In centric occlusion, maxillary 6 anterior contact type was frequently observe (30.08%) compared with other types of contact (incisor contact: 19.47%, no contact: 17.70%, canine and incisor contact: 15.04%, canines contact: 12.39%, unilateral canine contact: 5.31%) (P<0.01) 2. In protrusive position (edge to edge bite), maxillary central incisors contact was predominant (86.7%). (P<0.01) 3. In lateral excursion, there was not any significant difference between canine guided occlusion (47.79%) and group function occlusion (total 51.32%, AG:9.29%, PG:13.27%, G:28.76%). 4. Temporomandibular joint dysfunction was observed in 12.4% of 123 subjects.

• 구강회복응용과학지
• /
• 제37권3호
• /
• pp.157-170
• /
• 2021

구치부 지지 상실과 같은 치아 결손은 불안정한 교합 관계를 야기하고 중심위나 습관적 폐구위에서 하악의 전방 활주 시 전치부에 과도한 하중을 초래하기 쉬워 교합평면이 붕괴되며 교합수직고경의 감소와 악관절 기능 장애까지 나타날 수 있다. 치열궁 크기의 부조화는 전치부와 구치부에서 수직수평적인 관계의 부조화를 유발하며 이로써 나타나는 전치부의 과개교합과 구치부의 가위교합은 불안정한 교합접촉과 충분하지 못한 교합접촉면적을 야기한다. 본 증례는 이와 같은 문제들이 복합적으로 나타나는 환자로 임시보철물을 이용하여 교합수직고경 증가 및 새롭게 설정한 교합평면에 대한 적응을 평가하였고, 교차 모형부착을 이용하여 최종보철물에 반영하여 수복하였다. 그 결과 안정적인 교합과 조화로운 수직수평피개 및 교합평면을 형성하여 기능적, 심미적으로 만족스러운 결과를 얻어 이를 보고하고자 한다.

• Journal of Periodontal and Implant Science
• /
• 제16권1호
• /
• pp.90.2-90.2
• /
• 1986

• 구강회복응용과학지
• /
• 제16권2호
• /
• pp.133-147
• /
• 2000

A well-planned, precise occlusal adjustment of natural teeth has some distinct advantages over other forms of occlusal therapy. It should be emphasized, however, that an occlusal adjustment is an irreversible procedure and has definite contraindications in some mouths. Generally, the treatment methods for the patients that has open-bite will be following as below. : (1) Use of removable orthopedic repositioning appliance, (2) Orthodontics, (3) Full or partial reconstruction of the dentition, (4) Orthognathic surgical procedure, (5) Occlusal adjustment of the existing natural teeth, (6) Any combination of the above. Above all, the advantages of occlusal adjustment of natural teeth are : (1) the patient is more able to adapt to the changes in jaw position and posture; (2) the phonetic or speaking ability of the patient is not significantly changed and usually is improved; (3) the esthetics of the natural teeth is not altered and often is better; (4) the hygiene of the individual teeth is easily maintained; and (5) the functional usage of the teeth as cutting and chewing devices is markedly improved. The objective of an occlusal adjustment, as with any form of occlusal therapy, is to correct or remove the occlusal interferences, or premature contacts, on the occluding parts of the teeth which prevent a centric relation closure of the mandible. A systematic, disciplined approach can be followed in treatment, the objectives should be listed. They are : (1) Centric relation occlusion of the posterior teeth. (2) Proper "coupling" of the anterior teeth. (3) An acceptable disclusive angle of the anterior teeth in harmony with the condylar movement patterns. (4) Stability of the corrected occlusion. (5) Resolution of the related symptoms. For the patient with open-bite on anterior and posterior teeth, this case report shows the treatment methods in combination the fixed prosthesis with the selective cutting of the natural teeth. Occlusal adjustment is no longer an elective procedure but a mandatory one for patients requiring restorations and those in treatment for TMD dysfunctions or those whose dentitions show signs of occlusal trauma. Occlusal adjustment is essential for all who do not display the above lists.

• Journal of Oral Medicine and Pain
• /
• 제31권3호
• /
• pp.245-254
• /
• 2006

구강안면 영역의 통증이나 치아결손, 부정교합 같은 치아적 요소가 편측저작습관의 주요요인으로 여겨지나, 치아적 요소가 선호하는 저작측에 영향을 주지 않는다는 연구들도 있다. 본 연구에서는 컴퓨터화된 교합분석 시스템인 T-Scan II 시스템을 사용하여 편측으로 저작하는 대상자와 양측으로 저작하는 대상자 사이에 교합양상의 특이점이 있는지 조사하고 편측 저작자의 주저작측과 비저작측 사이의 차이를 함께 평가하고자 하였다. 편측저작습관에 대한 설문을 통하여 20명의 편측 저작자(평균 $25.25{\pm}2.84$세)와 20명의 양측 저작자(평균 $27.00{\pm}5.07$세)를 선정하였으며 치아적 문제나 악골의 통증이나 기능이상 같은 문제가 있는 경우는 모두 제외하였다. 습관적 폐구와 측방운동시의 교합양상은 T-Scan II 시스템을 이용하여 측정하였다. 습관적 폐구는 시간에 따라 초기, 중기, 말기로 나누었다. 각 세 단계에서의 접촉점의 수와 교합력의 비율을 좌우 양측으로 나누어 조사하였다. 습관적 페구 동안의 경과시간 및 치아 활주면적, 좌우측 각각의 측방운동시간이 측정되었다. 편측 저작 습관을 가진 사람들의 경우 양측 저작을 하는 사람에 비해서 치아의 평균 교합 면적이 작았다(p<0.005). 습관적 편측저작자에서 저작측과 비저작측을 비교해보았을 때 비저작측의 교합면적은 저작측에 비해 작았으나 (p<0.005), 편측저작자의 저작측과 양측저작군의 어느 한쪽의 교합면적 사이에는 유의한 차이가 없었다. 최초접촉부터 최대교두감합위까지의 경과 시간 및 측방운동 시간, 치아의 활주 면적 및 교합력의 좌우 비율도 양측저작군과 편측저작군 사이에 유의한 차이가 없었다. 이러한 결과는 저작시 좌우측 중 교합면적이 작은 측을 피하여 교합효율이 높은 방향으로 저작을 한다는 것을 의미한다.

• 대한치과교정학회지
• /
• 제52권3호
• /
• pp.172-181
• /
• 2022

Objective: The objectives of this study were to compare the time-dependent changes in occlusal contact area (OCA) and bite force (BF) of the deviated and non-deviated sides in mandibular prognathic patients with mandibular asymmetry before and after orthognathic surgery and investigate the factors associated with the changes in OCA and BF on each side. Methods: The sample consisted of 67 patients (33 men and 34 women; age range 15-36 years) with facial asymmetry who underwent 2-jaw orthognathic surgery. OCA and BF were taken before presurgical orthodontic treatment, within 1 month before surgery, and 1 month, 3 months, 6 months, 1 year, and 2 years after surgery. OCA and BF were measured using the Dental Prescale System. Results: The OCA and BF decreased gradually before surgery and increased after surgery on both sides. The OCA and BF were significantly greater on the deviated side than on the non-deviated side before surgery, and there was no difference after surgery. According to the linear mixed-effect model, only the changes in the mandibular plane angle had a significant effect on BF (p < 0.05). Conclusions: There was a difference in the amount of the OCA and BF between the deviated and non-deviated sides before surgery. The change in mandibular plane angle affects the change, especially on the non-deviated side, during the observation period.

• Journal of Oral Medicine and Pain
• /
• 제16권1호
• /
• pp.85-93
• /
• 1991

In this study, 88 dental students were examined to evaluate the relationship between occlusal states and TM disorders for the epidemiologic study of TM disorders. The clinical evaluation were composed of mandibular movement, TMJ noise, occlusal states and muscle palpation. The following results were disclosed. 1. The frequencies of pain on mandibular movement were 3.4% on maximum opening, 1.13% on protrusion and no pain on laterotrusion. 2. The frequencies on TMJ sound were 21.6% in click, 1.13% in crepitus. 3. The frequency of tenderness on palpation was 12.5% on extra oral, intraoral and neck muscles, tenderness on palpation of TMJ capsule were reported 5 cases, and 4 of them were female. 4. The distribution of Angle's classification was found 79.5% in class I, 4.5% in clasII-div.1 and 15.9% in class III. There was no significant differences on TM disorders between Angles classifications. 5. There was no significant differences on TM disorders between the subjects of canine guided occlusion and group function occlusion, and also for the differences between the subjects of nonworking side interferences and no interferences on laterotrusion. 6. There was no significant differences on TM disorders between the subjects of anterior teeth trauma in C.C. and no anterior teeth trauma, but there were significant differences between the subjects of posterior protrusive contact and no posterior protrusive contact.