• 산업경영시스템학회지
• /
• 제35권3호
• /
• pp.187-191
• /
• 2012

The methods for constructing network of observational locations for measuring water quality in water reservoirs have been widely proposed, but they had some limitations to be applied to river areas, which lie in awkward clustering and finding representative observational locations among locations within each clustering. In this paper, a statistical approach to detect anomaly locations which were significantly different in important measurements for the water quality from the previous locations and construct observational network with them was proposed. Anomaly was detected with the sampling distribution of each primary principal component score, sum of primary PCs, or sum of residual PCs. The empirical study with the data of Nakdong Dam for guiding how to use our proposed approach and showing limitations of previous studied was described.

• 한국안전학회지
• /
• 제15권4호
• /
• pp.139-149
• /
• 2000

This study aims to review and assess the existing postural classification schemes used for evaluating postural loads in industry. The schemes can be classified into three categories: self-report, observational and instrument-based techniques depending upon how to record working postures. Of the three techniques, this study was mainly focused on the observational methods. The observational technique is most widely used in the industrial sites because it does not interfere with work, and is easy and simple to use and cost-effective without requiring the use of expensive equipment for estimating the angular deviation of a body segment from the neutral position. In spite of the usefulness and applicability, the techniques have some problems: 1) The existing observational techniques lack the consistency in the class limits of the motion categories in each body segment; 2) Most of them do not provide the post-analysis criteria needed to judge whether or not any posture is acceptable in view point of the postural load; and 3) They can not precisely evaluate the postural load for a given posture because the external loads and dynamic factors including acceleration, moment and force were not taken into consideration.

• 대한안전경영과학회지
• /
• 제26권2호
• /
• pp.87-92
• /
• 2024

This study aims to compare six observational methods for assessing arm- and hand-intensive tasks, based on literature review. The comparison was conducted in viewpoints of body regions, force/external load, motion repetition, other factors including static posture, coupling, duration/break, pace, temperature, precision task, and final risk or exposure level. The number of risk factors assessed was more, and assessment procedure was more complex than the observational methods for assessing whole-body postural loads such as Ovako Working Posture Analysis System(OWAS), Rapid Upper Limb Assessment(RULA), and Rapid Entire Body Assessment(REBA). Due to these, the intra- and inter-reliabilities were not high. A past study showed that while Hand Arm Risk Assessment Method(HARM) identified the smallest proportion of the work tasks as high risk, Strain Index(SI) and Quick Exposure Check(QEC) hand/wrist were the most rigorous with classifying most work tasks as high risk. This study showed that depending on the observational technique compared, the evaluation factors, risk or exposure level, and evaluation results were different, making it necessary to select a technique appropriate for the characteristics of the work being assessed.

• Korean Circulation Journal
• /
• 제53권7호
• /
• pp.472-479
• /
• 2023

Background and Objectives: The association between bilirubin and atrial fibrillation (AF) has been evaluated previously in observational studies but with contradictory results. This study evaluated the causal association between serum bilirubin level and AF using Mendelian randomization (MR) analysis. Methods: This cross-sectional study includes 8,977 participants from the Dong-gu Study. In the observational analysis, multivariate logistic regression was performed to evaluate the association between bilirubin and prevalent AF. To evaluate the causal association between bilirubin and AF, MR analysis was conducted by using the UGT1A1 rs11891311 and rs4148323 polymorphisms as instrumental variables. Results: Elevated serum bilirubin levels were associated with an increased risk for AF in observational analysis (total bilirubin: odds ratio [OR], 1.31; 95% confidence interval [95% CI], 1.15-1.48 per 1 standard deviation [SD]; direct bilirubin: OR, 1.31; 95% CI, 1.18-1.46 per 1 SD), whereas the genetically predicted serum bilirubin levels in MR analysis did not show this association (total bilirubin: OR, 1.02; 95% CI, 0.67-1.53 per 1 SD; direct bilirubin: OR, 1.03; 95% CI, 0.61-1.73 per 1 SD). Conclusions: Genetically predicted bilirubin levels were not associated with prevalent AF. Thus, the observational association between serum bilirubin levels and AF may be noncausal and affected by reverse causality or unmeasured confounding.

• 대기
• /
• 제24권1호
• /
• pp.17-27
• /
• 2014

In this study, the observational environment for sunshine duration at Seoul and Daegu Automated Synoptic Observing Systems (ASOSs) was analyzed using a numerical model. In order to analyze the effects of topography and buildings on observational environment for sunshine duration, the model domains including the elevated building and mountainous areas around Seoul and Daegu ASOSs were considered. Three dimensional topography and buildings used as input data for the numerical model were constructed using a geographic information system (GIS) data. Solar azimuth and altitude angles calculated for the analysis period (one-week for each season in 2008) in this study were validated against those by Korea Astronomy and Space Science Institute (KASI). The starting and ending times of sunshine duration observed at ASOSs largely differed from the respective sunrise and sunset times simply calculated using solar angles and information of ASOSs' latitude and longitude, because uneven topography and elevated buildings around ASOSs cut off sunshine duration right after the sunrise and right before the sunset. The model produced the sunshine indices for Seoul and Daegu ASOSs with the time interval of one minute and the period of one week for each season and we compared the hourly averaged indices with those observed at the ASOSs. One week of which the cloudiness is lowest for each season is selected for analysis. Not only the adjacent buildings but also distant buildings and mountain cut off sunshine duration right after the sunrise and right before the sunset. The buildings and topography cutting off sunshine duration were found for each analyzing date. It was suggested that, in order to evaluate the observational environment for sunshine duration, we need to consider even the information of topography and/or building far away from ASOSs. This study also showed that the analyzing method considering the GIS data is very useful for evaluation of observational environment for sunshine duration.

• 터널과지하공간
• /
• 제16권1호
• /
• pp.1-10
• /
• 2006

실제 암반에는 단층, 절리, 층리, 균열, 단열, 편리, 벽개 등의 불연속면이 많이 포함되어 있다. 따라서, 불연속면이 암반구조물의 거동을 좌우하고 있다. 암반구조의 복잡성으로 인해 사전에 예측 할 수 없었던 암반의 붕락이 발생하여, 붕락대책에 막대한 비용과 시간을 낭비하는 사례가 많다. 암반 불연속면의 복잡성을 사전 조사단계에서 충분히 파악하거나 대책을 수립하는 것은 어렵다. 최근 터널의 정보화 설계시공이 중요시되어지고 있다. 본 논문에서는 불연속성 암반에서의 터널의 신 정보화 설계시공법을 제안하고, 현지에서 관찰한 불연속면 정보를 근거로 하여 실제 터널현장에 적용했다. 실제 터널현장에 있어서, 터널의 신 정보화 설계시공법을 위해서 새롭게 개발한 수치해석 프로그램을 사용하여 정확한 키블럭 추출이 가능하였다. 사용하기 쉬운 사용자 인터페이스를 가지고 있는 본 컴퓨터 시뮬레이션 기법은 암반블럭의 안정성 계산뿐만 아니라 추가 보강대책공의 설계도 가능하다. 터널 굴착중에 키블럭을 확인하므로써, 제안한 신 정보화 설계시공법의 유효성에 대한 검증을 하였다.

• 한국지구과학회지
• /
• 제39권4호
• /
• pp.349-360
• /
• 2018

This study analyzed variations of learning stress by comparing the salivary cortisol levels of students who participated in Earth Science inquiry activities. The cortisol concentrations between the pre- and post-inquiries of the sample of 34 university students, who had taken the course of 'Basic Earth Science and Experiments', were analyzed. The Earth Science inquiries consisted of geology and astronomy activities. The observational geology activities consisted of a session of 'structure contours and map patterns' and the cognitive astronomy activities consisted of a session of 'representations of horizontal and equatorial coordinates'. These Earth Science inquiry activities were found to cause students to have anxiety, and the thought processes that these activities involved were found to cause learning stress. The variations in cortisol concentrations of students increased by $1.6{\pm}5.9ng\;mL^{-1}$ after conducting observational activities in geology compared with $2.1{\pm}6.2ng\;mL^{-1}$ after doing cognitive activities in astronomy. The analysis of the observational activities in the geology inquiry activities indicated that they were consistent with low levels of learning stress. Conversely, the analysis of the cognitive activities in the astronomy inquiry activities showed significant individual variations in cortisol concentrations. Furthermore, individual differences in cognitive ability were reflected in the astronomy inquiry activities. While students, who received high scores, exhibited low levels of stress in the geology inquiry activities, they showed high levels of stress in the astronomy inquiry activities. It was concluded that, in the case of students with high scores in the study, the level of learning stress increased due to the raised anxiety in cognitive inquiry activities. In contrast, students, who received low scores in the study, exhibited high levels of stress in the geology inquiry activities, and low levels of stress in the astronomy inquiry activities.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.401-406
• /
• 1998

This study aimed at the technique for the construction control in braced excavation works. Selecting a case of Kwangju subway works, field observational values were compared with prediction using Plaxis's. Maximum observational values relevant to both horizontal and vertical proved satisfactory in that they were within the criteria. Numerical results by used Plaxis were overestimated greater than observational values, which meant the prediction were safe tendency. .It must be emphasized that displacement measurement for neighboring important structures should be carried out in order to take countermeasure charge for construction methods, in case that the risk or failure was previewed.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2008년도 한국우주과학회보 제17권2호
• /
• pp.38.2-38.2
• /
• 2008

In Korean historical documents, there are a great number of the records for various astronomical events. In particular, historical documents of the Joseon dynasty also have the records containing observational data by an astronomical instrument. However, a quantitative analysis for the accuracy of observational values have never been studied, although there are some studies on the truth of the records themselves. Hence, we investigated observation errors during the period of the Joseon dynasty from the records of Joseon-Wang-Jo-Sil-Lok (the Annals of the Joseon Dynasty) and Seung-Jeong-Won-Il-Gi (Daily Records of the Royal Secretariat). We used the records of the Mars, supernova 1604, and Halley's Comet, and found that observational values before the Hideyoshi invasions in 1592 are relatively more accurate than those after then. However, because the number of cases used in this study is small, we think that more studies are needed to confirm our results. Nonetheless, we reckon our work will be of service to understand astronomical records of the Joseon dynasty.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.407-407
• /
• 2002

The most widespread techniques for DEM generation are stereoscopy for optical sensor images and interfereometry for SAR images. These techniques suffer from certain sensor and processing limitations, which can be overcome by the synergetic use of both sensors and DEMs respectively. In this paper, different strategies for fusing SAR and optical data are combined to derive high quality DEM products. The filtering techniques, which take advantage of the complementary properties of SAR and stereo optical DEMs, will be applied for the fusion process. By taking advantage of the fact that errors of the DEMs are of different nature using the filtering technique, affected part are filtered and replaced by those of the counterpart and is tested with two sets of SPOT and ERS DEM, resulting in a remarkable improvement in DEM. for the analysis of results, the reference DEM is generated from digital base map(1:5000).