• 한국해안해양공학회:학술대회논문집
• /
• 한국해안해양공학회 1992년도 정기학술강연회 발표논문 초록집
• /
• pp.1-4
• /
• 1992

New cotidal charts of the Tusima Strait has been edited by ODAMAKI (1989a) using tidal current observation data. For the semidiurnal tide as shown in Fig.1, two distinctive features are detected. One is an anti-amphidromic area located in the south coast of Korea. Another is the amplitude gap between west and east coasts of the Tusima.(omitted)

• Journal of Periodontal and Implant Science
• /
• 제29권2호
• /
• pp.415-433
• /
• 1999

Implant stability is the key to long-term successful outcome for osseointegrated implants. To evaluate the initial healing response of bone around HA-coated implants without primary bone contact. 21 HA-coated thread type implants(STERI-OSS?) were placed in the femurs of 5 mongrel dogs, about 1-year old. Implants, 8 mm in length and 3.8mm(experimental 1group), 5.0mm(experimental 2group) and 6.0mm(control group) in diameter, were inserted after 3 holes of 6.0mm in diameter and 10mm in depth were prepared in the surgical sites each dog. Implants were supported by only nonresorbable membrane($Teflon^{(R)}$), in order to prevent the ingrowth of upper soft tissue into the gap between bone and implant, and to maintain each implant to be positioned in the center of the drilled hole. 9 implants with different diameters were inserted in 3 dogs for histologic observation, and 12 implants were inserted in 2 dogs for mobility test and removal torque test. Fluorescent dyes were injected for the observation of new bone formation in order of $Terramycin^{(R)}$, Arizarin $Red^{(R)}$, and $Calcein^{(R)}$ at an interval of 2 weeks. 3 dogs were sacrificed for histologic observation at 4, 8, and 12-week after placement. Light microscopy and confocal laser scanning microscopy were used to qualitatively characterize the bone around HA-coated implant. 2 dogs were sacrificed for mobility test($Periotest^{(R)}$, Simens AG, Bensheim, Germany) and removal torque test($Autograph^{(R)}$ AGS-1000D series, Japan) at 8 and 12-week after placement The results were as follows: 1. Histologic observation showed that osseointegration occurred to both control and experimental groups as time lapse, but delayed bone healing was revealed in 3.8mm group (experimental 1group), compared to contrtol group and 5.0mm group (experimental 2group). 2. The mobility test showed that the experimental groups had no distinguishable movement during experimental periods of 8 and 12-week, and there was no difference in mobility depending on the gap between bone and implant, and time lapse. 3. The removal torque forces were increased depended on the gaps decreasing between bone and implant, and time lapse. The results suggest that HA-coated implant without primary bone contact, based on guided bone regeneration could obtain its stability in all experimental groups as time lapse, but bone healing was delayed in experimental group of 3.8mm. And the results suggested that studies on correlationship between mobility test and removal torque test for implant stability would be necessary.

• 대한치과보철학회지
• /
• 제38권4호
• /
• pp.510-525
• /
• 2000

The effects of pretreatment of Co-Cr alloy, including two adhesive primers that contain either MDP or MAC-10, and silicoating on the bond The result sobtained as follows; o Strength of 4-META/MMA-TBB resin were investigated using FT-IR, SEM, and EDAX. o In the SEM observation of surface morphologies, the sandblasted specimen exibited a very rough surface, whereas the surfaces of the two groups primed with either MDP or MAC-10 were covered with a layer of primer, and the surface morphology of the silicoated specimen remained almost the same after sandblasting. o Before the thermocycling tests, the group treated with MDP demonstrated the highest mean tensile bond strength and the sandblasted group showed the lowest bond strength. o After 20,000 thermocyling, the mean tensile bond strength of the sandblasted group exhibited a 50% reduction in bond strength, while the others showed a $20\sim30%$ reduction. o Observation of the metal-resin interface revealed that in all groups the resin permeated the rough surface formed by sandblasting thereby producing a mechanical bond between the metal and the resin. It was also found that thermocycling resulted in a gap formation at the metal-resin interface of the specimens, and the sandblasted group exhibited a larger gap width than the other groups. o In fracture mode, all specimens indicated a cohesive fracture within the resin before thermocycling. However, thermocyling produced adhesive failure at the edge of the resin-metal interface in most specimens. The sandblasted group, which exhibited the lowest bond strength after thormocycling, also demonstrated the largest area of adhesive failure.

• 한국진공학회지
• /
• 제8권3B호
• /
• pp.290-296
• /
• 1999

We have studied the phase separation and ordering phenomeon of InAlAs epilayers grown on InP substrate by LP-MOCVD with DCXRD, PL, and TEM. From the intensity and FWHM of DCXRD and PL, we observed that the structural and optical quality of InAlAs epilayers were improved as growth temperature increased. The band-gap reduction due to phase separation and ordering is 291, 246, and 28 meV in the InAlAs epilayers grown at $565^{\circ}C$, $615^{\circ}C$, and $700^{\circ}C$, respectively, and shows the same from the InAlAs epilayer town at 5$65^{\circ}C$ in which the HRTEM micrograph showed the lattice fringe between InAs-rich and AlAs-rich regions was tilted by $2^{\circ}$ due to composition difference. However the maximum degree of ordering by intensity of extra spots was obtained at medium growth temperature. The annealing experiment by RTA of sample grown at $565^{\circ}$ shows a maximum band-gap shift of 78eV at $880^{\circ}$ for 3 min, and TEM shows that the origin of the blue shift of band-gap is the complete disappearance of ordering. Through annealing we can conclude that short time annealing affects only ordering and that most of the total band-gap reduction (~3/4) occurs by phase separation.

• 대기
• /
• 제21권1호
• /
• pp.1-16
• /
• 2011

Numerical prediction capability has been improved over the decades, but progress of prediction for high-impact weather (HIW) was unsatisfactory. One reason of low predictability for HIW is lack of observation data. The National Institute of Meteorological Research (NIMR) has been performed observation program for improvement of predictability, and reduction in social and economical cost for HIW. As part of this observation program, summer intensive observation program (ProbeX-2009) was performed at the observation-gap areas from 25 August to 6 September 2009. Sounding observations using radiosonde were conducted in the Gisang2000 research vessel (R/V) from the Korea Meteorological Administration (KMA) over the West Sea and the Eardo R/V from the Korea Ocean Research and Development Institute (KORDI) over the South Sea. Observation System Experiment (OSE) is carried out to examine the effect of ProbeX-2009 data. OSEs using Korea Local Analysis and Prediction System (KLAPS) and Weather Research and Forecasting (WRF) Model are conducted to investigate the predictability for a short time forecast. And, OSEs using WRF/3DVAR system and WRF forecast model are conducted to study the predictability for an extended time. Control experiment (K_CTL and CNTL) used only GTS observation and experiment (K_EXP and SWEXP) used ProbeX-2009 data from two system are performed. ETS for 3hr accumulated rainfall simulated by KLAPS-WRF shows that K_EXP is higher than K_CTL. Also, ETS for 12hr accumulated rainfall of SWEXP from 3DVAR-WRF is higher than CNTL. The results indicate that observation over the ocean has positive impact on HIW prediction.

• 대한지구과학교육학회지
• /
• 제3권3호
• /
• pp.184-190
• /
• 2010

This study is to verify the effects of classes at a finishing stage using cartoons depicting certain science textbook units on scientific attitudes and academic achievements of students, compared to those of classes using experiment and observation oriented textbooks. Participants of this study were 56 fifth graders at B Elementary School in Busan, and cartoon textbooks were developed based on 'Unit 1. Mirror & Lens' and 'Unit 3. Temperature & Wind' from a science textbook for the 1st semester, the year 5 to conduct cartoon led lessons just before ending a class till the 10th lesson, for the period of 4 weeks. The result of this study can be summarized as follows: Firstly, scientific attitudes improved better from the cartoon based lesson of a final stage than from the experiment and observation method, and especially more effective in lower groups among all other academic achievement levels as well as in male students. Secondly, academic achievements scored higher when cartoons were used in lessons than when the experiment and observation type was used, with higher groups of academic achievement levels working better, despite no significant gap existing between two genders. Thirdly, the memory transfer and sustenance of lessons were more effective in finishing class stage with cartoon studies than with experiment and observation one, and among all levels and both sexes, higher academic groups and male pupils exceeded. Fourthly, when questioned about their opinions on a cartoon led lesson for a final stage, 65% of those participants responded positively, while higher groups preferred more than lower groups. responded positively, while higher groups preferred more than lower groups.

• 농약과학회지
• /
• 제17권4호
• /
• pp.271-282
• /
• 2013

본 연구는 2009년도부터 2012년까지 4년간 농협중앙회를 통해 농산물우수관리제도(GAP) 인증을 받은 농산물의 농약잔류실태를 평가하기 위하여 잔류농약다성분분석법에 따라 GC(ECD, NPD)와 HPLC를 이용하여 283종의 잔류농약을 분석하였다. 이 기간 동안 6,590점의 GAP 인증 농산물을 분석한 결과 잔류농약의 검출율은 2009년, 20.27%, 2010년, 23.42%, 2011년, 28.07% 및 2012년, 31.75%였으며, 부적합율은 2009년, 2.25%, 2010년, 1.82% 2011년, 1.67% 및 2012년, 3.47% 로 나타났다. 잔류허용기준을 초과한 농약은 carbendazim 등 12종 이었고, 미적용 농약 사용으로 인한 부적합 성분은 endosulfan을 비롯하여 40종 이었다. 대부분의 농산물에서 농약이 잔류허용기준 이내로 나타났기 때문에 안전하다고 보이지만 딸기에서 검출된 endosulfan 과 같이 해당작물에 대한 등록되지 않은 농약사용으로 인한 부적합이 127건, 사과에서 검출된 carbendazim 같이 허용기준 초과로 인한 부적합이 총 25 건이 발생하여 향후 GAP 농산물의 생산단계에서 농약사용에 대한 지속적인 관리가 필요할 것으로 사료된다.

• 한국표면공학회지
• /
• 제40권4호
• /
• pp.197-202
• /
• 2007

Fit of the restoration and its cementation procedure is crucial to both its short and long term prognosis. Marginal fit is affected by many variables during the fabrication process. These variables, being intrinsic properties of the materials or the clinical technique used, can cause changes in the size and shape of the definitive restoration. Even if all variables are controlled carefully, the seating of a restoration can still be affected due to insufficient space for the luting agent. The use of die spacer can reduce the elevation of a cast restoration of a prepared tooth, decreased seating time, improve the outflow of excess cement, and lower the seating forces. The purpose of this study was to evaluate the marginal fidelity according to die spacer application times and measurement site. Casting alloys were prepared and fabricated using non-precious metal at $950^{\circ}C$. Specimens are divided into four groups: I(die spacer painted casting for wax pattern), II(die spacer non painted casting for wax pattern). The specimens were cut and polished for marginal gap observation. The marginal gap was observed using scanning electron microscopy (SEM).

• The Journal of Asian Finance, Economics and Business
• /
• 제8권2호
• /
• pp.57-64
• /
• 2021

This research attempts to formulate a new mean-risk model to replace the Markowitz mean-variance model by altering the risk measurement using ARCH variance instead of the original variance. In building the portfolio, samples used are closing prices of Indonesia Composite Stock Index and Indonesia Composite Bonds Index from 2013 to 2018. This study is a qualitative study using secondary data from the Indonesia Stock Exchange and Indonesia Bonds Pricing Agency. This research found that Markowitz's model is still superior when utilized in daily data, while the mean-ARCH model is appropriate with wider gap data like monthly observation. The Historical return has also proven to be more appropriate as a benchmark in selecting an optimal portfolio rather than a risk-free rate in an inefficient market. Therefore Mean-ARCH is more appropriate when utilized under data that have a wider gap between the period. The research findings show that the portfolio combination produced is inefficient due to the market inefficiency indicated by the meager return of the stock, while bears notable standard deviation. Therefore, the researcher of this study proposed to replace the risk-free rate as a benchmark with the historical return. The Historical return proved to be more realistic than the risk-free rate in inefficient market conditions.

• 대기
• /
• 제20권4호
• /
• pp.519-530
• /
• 2010

In this paper we review current research on Atmospheric Brown Clouds (ABCs) with lightweight Unmanned Aerial Vehicles (UAVs) and miniaturized instruments. The UAV technology for in-situ measurements, including aerosol concentration, aerosol size distribution, aerosol absorption, cloud drop size distribution, solar radiation fluxes (visible and broadband), and spectral radiative fluxes, is a leading-edge technology for cost-effective atmospheric sounding, which can fill the gap between the ground measurement and satellite observation. The first experimental observation with UAVs in Korea, Cheju ABC Plume Monsoon Experiment (CAPMEX), conducted during summer 2008 revealed that the Beijing plumes exerted a strong positive influence on the net warming and fossil-fuel-dominated black-carbon plumes were approximately 100% more efficient warming agents than biomass-burning-dominated plumes. Long-term sustainable routine UAV measurements will eventually provide truly three-dimensional data of ABCs, which is necessary for the better understanding of their climate impacts and for the improvement of numerical models for air pollution, weather forecast and climate change.