• Science of Emotion and Sensibility
• /
• v.25 no.2
• /
• pp.23-30
• /
• 2022

The weight of an object is an important research topic in terms of sense, and objects have size-weight, color-weight, and material-weight illusions due to the influence of size, color, and material and the weight of the object. Although temperature is a very important environmental factor in our daily life, there is a dearth of studies on how the temperature of an object affects its perceived weight. This study analyzed the effect of an object's temperature on the perceived weight. A stainless steel cup, in which weight and temperature are easily adjustable, was selected as a perceived weight measurement object; 5 temperature levels (0, 9, 20, 40, 70 degrees) and 2 weight levels (250, 400 g) were set. A total of 40 healthy men and women in their 20s participated in the experiment. The weight of the given cup compared to the reference cup was evaluated according to the modulus method. The study revealed that both temperature and weight significantly affected the perceived weight. The effect of temperature on the weight was different depending on the weight of the object. When the cup's weight was small (250 g), the temperature of the cup did not affect the weight. However, the perceived weight of a large cup (400 g) increased at a low temperature. This result suggests that the effect of temperature on the weight of an object depends on the size-weight illusion.

• 보존과학연구
• /
• s.25
• /
• pp.133-150
• /
• 2004

Once the object has been excavated at underwater condition, it should be subjected to condition that may cause its deterioration. Therefore, it is important that the object immediately keeps stable environment. It means that the object was excavated at underwater and it exposed the deterioration condition, as soon as possible it was not dried on surface, especially metallic and organic material. Iron objects is particularly notorious for rapid disintegration that it kept wet or stored in a stable environment. Ceramics, glass and stone were handled carefully that it prevented physical damage by mishandling. Organic materials of wood, leather, rope, bone must not be allowed to dry out because the creaking, shrinking and warping are well known disintegration. Therefore objects is basis of keeping stable condition in on-site and then it will have to pass through a detailed conservation process in the laboratory.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.557-560
• /
• 2005

The color of objects varies with changes in illuminant color and viewing conditions. As a consequence, color boundaries are influenced by a large variety of imaging variables such as shadows, highlights, illumination, and material changes. Therefore, invariant color models are useful for a large number of applications such as object recognitions, detections, and segmentations. In this paper, we propose invariant color models. These color models are independent of the object geometry, object pose, and illumination. From these color models, color invariant edges are derived. To show the validity of the proposed invariant color models, some examples are given.

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.5
• /
• pp.590-599
• /
• 2003

In this study. object transport method based on ultrasonic flexural vibration is presented. Ultrasonic vibration generates ultrasonic traveling waves on the surface of elastic medium. Objects are transported through the interaction with traveling waves propagating in medium. Two types of transport methods are studied： frictional drive and acoustic levitation. With frictional drive, objects are transported in contact with the beam in the opposite direction of wave propagation whereas with acoustic levitation, objects are acoustically levitated above the beam surface and transported in the wave propagation direction. Transport characteristics are experimentally investigated using objects of different shapes and sizes. The transition from acoustic levitation mode to frictional drive mode is also examined. and it is found to occur when the ratio of mass to area of an object exceeds the threshold ratio of mass to area. It is envisaged that this feasibility study will serve as a stepping-stone for ultrasonic vibration to become an effective industrial material handling device in the future.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.6
• /
• pp.454-461
• /
• 2000

Electrostatic suspension offers an advantage of directly suspending various materials such as conductive materials, semiconductors and dielectric materials without any mechanical contacts. This is a specific feature compared with electromagnetic suspension which can suspend only ferro-magnetic material. In general, the electrostatic suspension systems require position sensors for stabilizing the suspended object. Therefore, a lot of displacement sensors and a switching circuit are required for moving the object through a long distance. In order to circumvent this problem, this paper proposes a self-sensing method which can provide the gap displacement between electrodes and suspended object without external sensors. Moreover a simple on-off controller is presented for stabilization. Experimental validation of the proposed scheme has been performed through the successful levitation of a 4-inch silicon wafer.

• Journal of Welding and Joining
• /
• v.22 no.6
• /
• pp.43-49
• /
• 2004

In this study, a visual sensor system which can detect I-butt weld joint with height variation and includes a seam tracking algorithm was investigated. Three-dimensional position of an object can be acquired by using the method of distance measurement, i.e., an optical trigonometry which results from the spatial relations between the camera, the object and the structured light by a visible laser. Effects of laser intensity and iris number for the image quality as well as object material were investigated for the optical system design. For the image processing, a region of interest is defined from the whole image and a line image of laser is drew by using the gray level difference in the image. From the drew laser line, the weld joint can be recognized in searching the biggest point position calculated from the central difference method. Through a series of welding experiments, a good tracking performance was confirmed under GMA welding.

• IE interfaces
• /
• v.12 no.1
• /
• pp.102-113
• /
• 1999

BOM(Bill of Material) is a description of parts, assemblies and raw materials that comprise a product structure. In manufacturing companies that produce various products with short life cycles, it is very important to manage to BOM of products with various options and versions efficiently. This paper describes an effective modeling and implementing technique of Generic BOM Management System(GBMS) for management of number of variant products. In this paper, OMT(Object Modeling Technique) was used to model a generic BOM and Object-Relational Database Management System(ORDBMS) was used to implement the GBMS database. In order to prove the effectiveness of proposed methodology, a case that assembles computer with various options was studied.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.7
• /
• pp.1633-1641
• /
• 1996

In this paper we propose a new method for anlayzing the properties of surface reflectance and reconstructing the shape of object using estimated reflectance parameters. We have investigated the hybrid reflectance surface which has specularreflection and diffuse reflection, which can be explained by Torrance-Sparrow model. Sample sphere made on one maerial is used to estimate the reflectance properties by using LMS algorithm. We can make the reference image which consists of surface normal and brightness value using estimated reflectance parameters, and thenarbitrary shape object made of the same material as sample can be reconstructed by matching with reference image. Photometric matching method proposed in this paper is robust because it mateches object image with the reference imageconsidering its neighbor brightness distribution. Also, in this paper plate diffuse illumination is used to remove intensity disparity with simple scheme. It is expected that the proposed algorithm can be applied to 3D recognition, vision inspection system and other fields.

• The Korean Society of Law and Medicine
• /
• v.8 no.1
• /
• pp.9-34
• /
• 2007

Human material is considered as an independent object after departing from human body. But unlike other materials, that is not allowed for the trading because of the nature of personality. According to the present legal system, the human material is only permitted to donate to the researcher or biobank for scientific study. Bur after the collection, the human materials are regarded as a valuable assets and the collectors want to get more economic gains. If the neutral modulators serve for the justifiable circulation. The economic motivations could be prevented within material transfer processes. In real life, the neutral modulator is hard to find and most of partipants are involved in the economic interests. In this situation, it may be justifiable to permit the person who donate his body material to pursue reach through right on his material. The problem is how to measure the value of human material and how to treat the informed consent. If the essential portion of human personality is contributed to the value of human material and if only his material can be served for the invention, the tissue donator can get economic interests on his body material as his property. That is based on the rule of processing of human efforts on civil law.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.04a
• /
• pp.135-142
• /
• 2004

The apparent advantages of FRP (fiber reinforced plastics) composites over the conventional structural materials may be attributed to their high specific strength and stiffness. Other affordable properties of FRPs including an excellent durability make them particularly attractive for the structures in severe service conditions. Therefore, the material and sectional properties of a FRP structural component should be designed to meet its specific requirements and service conditions. This paper is performed the material property optimization under optimum design of pultruded FRP bridge deck section. In the problem formulation, an objective function is selected to minimize the maximum R(strength ratio). The thickness of layers, volumes of fibers and matrix fiber orientation, and stacking sequence of FRPs are used as the design variables. Strength ratio in the design code, material failure criteria and pultruded manufacture thickness are selected as the design constraints to enhance the material performance of FRP decks. From the results of the numerical investigation, we obtained the optimum deck section profile for conventional using object.