• 한국식품조리과학회지
• /
• 제19권4호
• /
• pp.439-446
• /
• 2003

This study was performed to investigate the change in the chemical components of red pepper powder using different packaging materials and various storage conditions. Red pepper powders with 11 and 15% initial moisture content were packed with five different materials and stored at different temperatures (0, 20, and 30 C) for a one year period. Over the storage period, each combination was periodically sampled, and examined for composition changes. The five packaging materials were: linear low density polyethylene(LLDPE), nylon/LLDPE(Ny/LLDPE), saran coated ethylene vinyl acetate copolymer/linear low density polyethylene(B650), nylon/Tie/nylon/ethylene-vinyl alcohol copolymer/nylon/Tie/LLDPE(RDX-2787) and oriented polypropylene/alumimum/LLDPE(OPP/Al/LLDPE), and the three storage conditions were (28.3${\pm}$1.0)$^{\circ}C$ with (15.5${\pm}$2.8)% relative humidity, (18.6${\pm}$0.5)$^{\circ}C$ with (46.6${\pm}$4.9)% RH, and (0${\pm}$2)$^{\circ}C$ with (80${\pm}$10)% RH, respectively. The moisture contents of all samples changed according to the relative storage humidity, except those of the samples packed with OPP/Al/LLDPE, which remained constant throughout the storage period. The capsaicinoids content of the red pepper powder did not change significantly for 6 months, but gradually decreased after that until about 85% of the original amount remained at the final stage of storage. The ASTA color values of all samples decreased gradually throughout the storage period. The higher the storage temperature, the more severe the deterioration. The color deterioration seemed greatly related to the existence of oxygen, as the deterioration was especially severe in the samples packed with LLDPE and B650, where the oxygen transmission rate were highest among the five packaging materials.

• 한국응용과학기술학회지
• /
• 제11권2호
• /
• pp.69-74
• /
• 1994

Durable softening water repellents for nylon fiber were synthesized, using two compounds: quaternized octadecyl methacrylate-2-diethylaminoethyl methacrylate copolymer as a mother resin of water repellent and quaternized fatty carbamide for improving softness and hydrostatic pressure, of which syntheses were studied in the previous papers. They were blended with waxes and emulsifiers in a variety of ratios and synthesized into water repellent PADWC, and it was nylon taffeta treated with and without textile finishing resin. The synthesized water repellents can be used either or without resin. The optimum curing temperature was 150 to 160$^{\circ}C$ and the optimum concentration was 3 to 5wt%. In the independent and conjunct treatment, the water repellency of nylon taffeta samples have no remarkable changes between initial value and that after three times washing, so these prove that the synthesized compounds are durable water repellent. The water repellency of PADWC-3 and -4 were around 90. Also, comparison of crease recovery and tear strength after repelling treatment showed that the synthesized water repellents have a very high softening effect.

• 폴리머
• /
• 제38권1호
• /
• pp.31-37
• /
• 2014

본 연구에서는 바이오매스 기반 나일론 6,5 공중합체를 제조하기 위하여 단량체인 ${\varepsilon}$-caprolactam과 2-piperidone을 glucose로부터 발효공정으로 제조된 lysine과 5-aminovaleric acid로부터 각각 제조하였다. 이들을 potassium tertbutoxide를 촉매로 하고 acetyl-2-caprolactam과 이산화탄소를 개시제로 사용하여 $40^{\circ}C$에서 음이온 개환 중합 방법을 이용하여 나일론 6,5 공중합체를 제조하였다. 제조된 바이오 나일론 6,5 공중합체의 특성을 여러 가지 기기분석 방법으로 분석하였다. 이때 얻어진 고분자의 점도분자량($M_{\eta}$)은 최대 30000 g/mol 정도였으며, 중합 수율은 50% 이상이었다. 이들은 모두 semi-crystalline 고분자로 밝혀졌다. 열 특성 분석 결과 용융온도는 약 $165^{\circ}C$ 정도로 분해온도 $250^{\circ}C$와 큰 차이를 나타내었다. 이들 고분자들은 우수한 가공성과 응용성을 지닐 것으로 예상된다.

• 대한화장품학회지
• /
• 제23권3호
• /
• pp.134-146
• /
• 1997

Consumers have recently preferred to purchase extensive UV intercepting products, which are waterproof and free from side effects on skin. Testing Cytoroxicity in SR method, cell survivial ratio of UV-B interceptors decreased above 0.08W/V%, and so did that of UV-A interceptors above 0.06W/V%. Also, Patch-test of inorganic UV interceptors resulted in no skin irritation even below 10.0 and 11.25. UV interceptors in the sunlight showed yellowish discoloration in 5 to 14 days. In absorption curves, UV-B was most suitable for Octyl methoxycinnamate and UV-A for Butyl methoxy dibenzoylmethane. Fro this reason, Nylonpoly UVA/UVB the material of OMC and BMDM coated with Nylon & polyethylene, was used as the organic UV interceptor. And zinc oxide and titanium dioxide was used as inorganic UV ibterceptors. The appropriate mixture ratio of ZnO and TiO2 was 6 to 4.6% of ZnO, 4% of TiO2 and 5% of Nylonpoly UVA/UVB were all combined with our sunscreen cream. The SPF value of in-vivo applied to a guinea pig was 34.9 and that of in-vivo was 38.5. Cyclomerhicone and dimerthicone were used in water-in-Silicone system. Ceryl diverhicone and sorbitan sesquioleate were used as emulsifiers and MgSO4, 7H2O, Mg-stearate/Mg-Al-stearate copolymer as emulsification stabilizers. In practical application, each SPF duration of O/W type and W/S type containing sunscreen cream of the same content showed that W/S type of sunscreen cream was 5 times as durable as the other. This product is fit for using in swimming, climbing or skiing. This research is to minimize skin trouble used by UV interceptors and to make one with proper softness, skin safety and UV intercepting efficiency.