• Korean Journal of Materials Research
• /
• v.9 no.9
• /
• pp.913-918
• /
• 1999

As an alternative evaluation method of electromagnetic shielding properties, the material parameters are considered in determining the qualitative value of shielding effectiveness. The specimens are metallized nylon fabrics with the thickness of about 0.1 mm and the electrical conductivities in the range from 6.4$\times$10~2.4$\times$10(sup)5 mhos/m. On the basis of shielding theory, the shielding effectiveness (which is a sum of reflection loss and absorption loss) has been determined from the material parameters of the barrier sheets. For the conductive fabrics, the dominant shield mechanism is predicted to be reflection loss, which shows an increasing function of electrical conductivity. Comparing these theoretical value with the directly measured surface impedances, the error range is found to be within 10 dB, which demonstrates that the proposed material-parameters method can be a convenient way to determine the electromagnetic shielding properties.

• Journal of Environmental Health Sciences
• /
• v.35 no.6
• /
• pp.500-509
• /
• 2009

Passive samplers have been used for many years for the sampling of organic vapors in work environment atmospheres. Currently, all passive samplers used in domestic occupational monitoring are foreign products. This study was performed to evaluate variable parameters for the development of passive organic samplers, which include the geometry of the device and diffusive length for the sampler design. Four prototype diffusive lengths; A-1(4.5 mm), A-2(7.0 mm), A-3(9.5 mm), A-4(12.0 mm) were tested for adsorption performances to a chemical mixture (benzene, toluene, trichloroethylene, and n-hexane) according to the US-OSHA's evaluation protocol. A dynamic vapor exposure chamber developed and verified by related research was used for this study. The results of study are as follows. The results in terms of sampling rate and recommended sampling time test indicate that the most suitable model was A-3 (9.5 mm diffusive lengths on both sides) for passive sampler design in time weighted average (TWA) assessment. Sampling rates of this A-3 model were 45.8, 41.5, 41.4, and 40.3 ml/min for benzene, toluene, trichloroethylene, and n-hexane, respectively. The A-3 models were tested on reverse diffusion and conditions of low humidity air (35% RH) and low concentrations (0.2 times of TLV). These conditions had no affect on the diffusion capacity of samplers. In conclusion, the most suitable design parameters of passive sampler are: 1) Geometry and structure - 25 mm diameter and 490 $mm^2$ cross sectional area of diffusion face with cylindrical form of two-sided opposite diffusion direction; 2) Diffusive length - 9.5 mm in both faces; 3) Amount of adsorbent - 300 mg of coconut shell charcoal; 4) Wind screen - using nylon net filters (11 ${\mu}m$ pore size).

• Animal Bioscience
• /
• v.34 no.1
• /
• pp.85-92
• /
• 2021

Objective: The objectives of this study were to determine the in situ degradation parameters and appropriate feeding level of pineapple cannery by-products (PCB) based on the growth performance and blood parameters of growing Hanwoo (Bos taurus coreanae) steers fed various levels of PCB. Methods: Two ruminally cannulated Holstein cows were used for in situ disappearance rate measurements. Nylon bags (5×10 cm, 45 ㎛ pore size) filled with 5 g of PCB in triplicate were inserted into the ventral sac of the two cannulated Holsteins cows and incubated for 0, 2, 4, 8, 16, 24, and 48 h. A total of 16 castrated growing Hanwoo steers (12.5±0.5 months old, 302.9±25.7 kg of initial body weight [BW]) were used for the experiment. Animals were stratified by initial BW and then randomly assigned to one of four experimental diets (0%, 1.5%, 3.0%, or 6.0% of PCB, on the dry matter [DM] basis) fed for 91-d, including 30-d of adaptation. Results: Soluble fraction a of DM and crude protein (CP) was 61.9% and 86.0%, fraction b of DM and CP was 32.7% and 11.2%, and indigestible fraction c of DM and CP was 5.4% and 2.8%. The 6.0% PCB feeding group showed lower productivity compared to animals in the other treatments. Increasing the dietary level of PCB did not alter DM intake, but it was numerically lowest in the 6.0% feeding group. The gain to feed ratio was linearly decreased by increasing of PCB. The quadratic broken-line test estimated that 2.5% (DM basis) was the maximum feeding level of PCB in growing Hanwoo steers (y = 0.103 - 0.001×[1.245-x]2, R2 = 0.18). Conclusion: Diets containing up to 2.5% PCB can be fed to growing Hanwoo steers without adverse effects on growth performance.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.3
• /
• pp.347-354
• /
• 2010

This study aimed to evaluate effects of 800 W microwave irradiation for 2, 4 and 6 min on chemical composition, antinutritional factors, ruminal dry matter (DM) and crude protein (CP) degradability, and in vitro CP digestibility of canola seed (CS). Nylon bags of untreated or irradiated CS were suspended in the rumen of three bulls from 0 to 48 h. Protein subfractions of untreated and microwave irradiated CS before and after incubation in the rumen were monitored by sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE). Microwave irradiation had no effect on chemical composition of CS (p>0.05). There was a linear decrease (p<0.001) in the phytic acid and glucosinolate contents of CS as irradiation time increased. Microwave irradiation for 2, 4 and 6 min decreased the phytic acid content of CS by 8.2, 27.6 and 48.6%, respectively. The total glucosinolate contents of CS microwave irradiated for 2, 4 and 6 min decreased by 41.5, 54.7 and 59.0% respectively, compared to untreated samples. The washout fractions of DM and CP and degradation rate of the b fraction of CP decreased linearly (p<0.001) as irradiation time increased. Microwave irradiation for 2, 4 and 6 min decreased effective degradability (ED) of CP at a ruminal outflow rate of 0.05 $h^{-1}$ by 4.7, 12.3 and 21.0%, respectively. Microwave irradiation increased linearly (p<0.001) in vitro CP digestibility of ruminally undegraded CS collected after 16 h incubation. Electrophoresis results showed that napin subunits of untreated CS disappeared completely within the zero incubation period, whereas cruciferin subunits were degraded in the middle of the incubation period (16 h incubation period). In 4 and 6 min microwave irradiated CS, napin subunits were degraded after 4 and 16 h incubation periods, respectively, and cruciferin subunits were not degraded untile 24 h of incubation. In conclusion, it seems that microwave irradiation not only protected CP of CS from ruminal degradation, but also increased in vitro digestibility of CP. Moreover, microwave irradiation was effective in reducing glucosinolate and phytic acid contents of CS.

• The Korean Journal of Food And Nutrition
• /
• v.21 no.4
• /
• pp.477-484
• /
• 2008

The Pacific saury, Cololabis saira Kwamaegi, is a traditional local food of the Eastern sea area, centered around Pohang. It is well-recognized as being both tasty and nutritious. Nevertheless, bacterial contamination, excessive dryness, and compositional changes render this fish edible only during the winter months. Thus, to improve its storage capabilities, this study assessed the effects of storage material, type, temperature, and duration on compositional changes in Kwamaegi. The assessed samples were Kwamaegi which had been naturally dried for 15 days. The storage materials included an A-film, a self- developed multi-film made of polyethylene, polyamide, EVOH, and polyethylene, and a B-film made of polyethylene, nylon, polyethylene, nylon, and polyethylene. The B films were utilized after pressing and lamination. The storage types included one whole fish(1G), or 2 divided fish(2G), to increase eating convenience. The 2G type was the muscle portion divided vertically after discarding the jowl, skin, and internal organs. The storage temperatures were 0, -15 and $-30^{\circ}C$, and the storage durations were 2, 4, and 6 months. Among the lipid rancidities, acid value and peroxide value showed the highest level of initial rancidity at a storage temperature of $0^{\circ}C$ for 2 months. We noted no significant differences between storage materials. The lower the storage temperatures, the less acid and peroxide were generated. Between the storage types, 1G evidenced lower less acid values than 2G. The TBA values revealed a dramatic increase at a storage temperature of $0^{\circ}C$ for 2 months, whereas this rapid progress was not observed at storage temperatures of -15 and $-30^{\circ}C$. Along with the acid value and peroxide value, the samples stored at 0, -15 and $-30^{\circ}C$ evidenced significantly lower TBA values. The B-film evidenced a slightly lower TBA value than was observed in the A-film, but no significant differences were observed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.6
• /
• pp.499-505
• /
• 1984

For the purpose of obtaining basic data which can be applied to processing of retort pouched shell-fishes, retort pouched seasoned baby clam was prepared. After sand and mud were removed, and then steamed baby clams were shucked. Baby clam meats were seasoned with the mixed seasoning powder containing $3\%$ of sugar, $2.5\%$ of salt, $12\%$ of sorbitol, $0.5\%$ of monosodium glutamate and $10\%$ of smoke flavor, and then dried at $35-40^{\circ}C$ for 3 hours. After dried, the meats were vacuum packed in plastic film bag (polyester/nylon/unoriented polyproylene; $12{\mu}m/15{\mu}m/50{\mu}m,\;15{\times}17cm$), and sterilized for 12 minutes in a hot water circulating sterilzer at $120^{\circ}C$, The factors such as pH, VBN, moisture content water activity, color value (L, a, b), texture, TBA value and viable bacterial count of products were determined during storage at room temperture ($20{\pm}3^{\circ}C$). The results showed that the product could be preserved in a good condition for 120 days at $20{\pm}3^{\circ}C$. Judging from the scores of sensory evaluation on flavor, the product added smoke flavor as seasoning was the most desirable.

• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.695-698
• /
• 2011

Purpose: Since spinal tuberculosis is increasing in prevalence, it appears that a repair of spinal soft tissue defect as a complication of spinal tuberculosis can be a meaningful work. We report this convenient and practical reconstructive surgery which use bilateral latissimus dorsi musculocutaneous advancement flap. Methods: Before the operation, $13{\times}9.5$ cm sized skin and soft tissue defect was located on the dorsal part of a patient from T11 to L3. And dura was exposed on L2. Under the general endotrachel anesthesia, the patient was placed in prone position. After massive saline irrigation, dissection of the bilateral latissimus dorsi musculocutaneous flaps was begun just upper to the paraspinous muscles (at T11 level) by seperating the paraspinous muscles from overlying latissimus dorsi muscles. The plane between the paraspinous muscles fascia and the posterior edge of the latissimus dorsi muscle was ill-defined in the area of deformity, but it could be identified to find attachment of thoracolumbar fascia. The seperation between latissimus dorsi and external oblique muscle was identified, and submuscular plane of dissection was developed between the two muscles. The detachment from thoracolumbar fascia was done. These dissections was facilitated to advance the flap. The posterior perforating vasculature of the latissimus dorsi muscle was divided when encountered approximately 6 cm lateral to midline. Seperating the origin of the latissimus dorsi muscle from rib was done. The dissection was continued on the deep surface of the latissimus dorsi muscle until bilateral latissimus dorsi musculocutaneous flaps were enough to advance for closure. Once this dissection was completely bilateraly, the bipedicled erector spinae muscle was advanced to the midline and was repaired 3-0 nylon to cover the exposed vertebrae. And two musculocutaneous units were advanced to the midline for closure. Three 400 cc hemovacs were inserted beneath bilateral latissimus dorsi musculocutaneous flaps and above exposed vertebra. The flap was sutured with 3-0 & 4-0 nylon & 4-0 vicryl. Results: The patient was kept in prone and lateral position. Suture site was stitched out on POD14 without wound dehiscence. According to observative findings, suture site was stable on POD55 without wound problem. Conclusion: Bilateral latissimus dorsi musculocutaneous advancement flap was one of the useful methods in repairing of large spinal soft tissue defect resulting from spinal tuberculosis.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.23 no.3
• /
• pp.134-146
• /
• 1997

Consumers have recently preferred to purchase extensive UV intercepting products, which are waterproof and free from side effects on skin. Testing Cytoroxicity in SR method, cell survivial ratio of UV-B interceptors decreased above 0.08W/V%, and so did that of UV-A interceptors above 0.06W/V%. Also, Patch-test of inorganic UV interceptors resulted in no skin irritation even below 10.0 and 11.25. UV interceptors in the sunlight showed yellowish discoloration in 5 to 14 days. In absorption curves, UV-B was most suitable for Octyl methoxycinnamate and UV-A for Butyl methoxy dibenzoylmethane. Fro this reason, Nylonpoly UVA/UVB the material of OMC and BMDM coated with Nylon & polyethylene, was used as the organic UV interceptor. And zinc oxide and titanium dioxide was used as inorganic UV ibterceptors. The appropriate mixture ratio of ZnO and TiO2 was 6 to 4.6% of ZnO, 4% of TiO2 and 5% of Nylonpoly UVA/UVB were all combined with our sunscreen cream. The SPF value of in-vivo applied to a guinea pig was 34.9 and that of in-vivo was 38.5. Cyclomerhicone and dimerthicone were used in water-in-Silicone system. Ceryl diverhicone and sorbitan sesquioleate were used as emulsifiers and MgSO4, 7H2O, Mg-stearate/Mg-Al-stearate copolymer as emulsification stabilizers. In practical application, each SPF duration of O/W type and W/S type containing sunscreen cream of the same content showed that W/S type of sunscreen cream was 5 times as durable as the other. This product is fit for using in swimming, climbing or skiing. This research is to minimize skin trouble used by UV interceptors and to make one with proper softness, skin safety and UV intercepting efficiency.

• Korean Journal of Food Science and Technology
• /
• v.20 no.1
• /
• pp.45-51
• /
• 1988

To improve the individual packaging method and extend the shelf life of hair tail(Trichiurus japonicus), salted an unsalted hair tail chunk (cut in 8-10cm) were packaged in laminated plastic film bag(Nylon/PE: $20{\mu}m,\;12{\times}15cm$) filled with with free-$O_2$ absorber, in vacuum, and stored at 0 and/or $5^{\circ}C$. The other samples were packaged in plastic foam trays, overwraped with oxygen permeable film(control), and stored at same temperature. Volatile basic nitrogen (VBN), trimethylamine (TMA) and viable cell counts (VCC) were progressed with increase of storage time, but thiobarbituric acid (TBA) values decreased gradually after reaching at a maximum peak in 5-15 days. Judging from 4 chemical components, VBN was the most available component in quality judgement of hair tail chunk and its upper limiting content was 29 mg%. Regression equation for shelf life prediction of hair tail chunk with sensory evalution and VBN component was determined.

• Toxicological Research
• /
• v.34 no.1
• /
• pp.49-53
• /
• 2018

Cyclohexanone ($C_6H_{10}O$, CAS No. 108-94-1) is a colorless oily liquid obtained through the oxidation of cyclohexane or dehydrogenation of phenol. It is used in the manufacture of adhesives, sealant chemicals, agricultural chemicals, paint and coating additives, solvent, electrical and electronic products, paints and coatings, photographic supplies, film, photochemicals, and as an intermediate in nylon production. Owing to the lack of information on repeated inhalation toxicity of cyclohexaone, in this study, we aimed to characterize the subacute inhalation toxicity. B6C3F1 mice were exposed to 0, 50, 150, and 250 ppm of cyclohexanone for 6 hr/day, 5 days/week for 4 weeks via whole-body inhalation in accordance with the OECD Test Guideline 412 (subacute inhalation toxicity: 28-day study). Mortality, clinical signs, body weights, food consumption, hematology, serum biochemistry, organ weights, as well as gross and histopathological findings were evaluated between the control and exposure groups. No mortality or remarkable clinical signs were observed during the study. No adverse effects on body weight, food consumption, hematology, serum biochemistry, and organ weights, gross or histopathological lesions were observed in any male or female mice in any of the exposure groups, although some statistically significant changes were observed in organ weights. We concluded that no observable adverse effect level (NOAEL) is above 250 ppm in mice exposed to cyclohexanone for 6 hr/day for 5 days/week.