Objectives: Recently, recombinant FSH (rFSH) has been manufactured using a Chinese hamster ovary cell line transfected with the gene encoding human FSH. Both rFSH and urinary gonadotropin (uFSH) could be used for controlled ovarian hyperstimulation (COH). However, uFSH implies a number of disadvantages, such as batch-to-batch inconsistency, no absolute source control, dependence on large amounts of urine, low specific activity, and low purity. The purpose of this study was to evaluate the efficacy of rFSH in human IVF-ET program. Materials and Methods: A total of 508 infertile women was enrolled in this study. They are classified into rFSH group (n=177) or uFSH group (n=331), and all of them were matched by age and cause of infertility in same period. The $Puregon^{(R)}$ (Organon, Holland) was used as rFSH, and the Metrodin-$HP^{(R)}$ (Serono, Switzeland) and $Humegon^{(R)}$ (Organon, Holland) was used as uFSH. We subdivided the patients into three age groups. The outcomes of IVF-ET program were analyzed using the statistical package for social sciences (SPSS). Results: There was no significant differences in the level of estradiol on hCG injection day, the numbers of retrieved oocytes, matured oocytes, fertilized oocytes, transferred embryos, frozen embryos between the two groups. The total dose (IU) of gonadotropin for COH was significantly lower in the rFSH group compared to uFSH group ($1339{\pm}5491.1$ vs $2527.8{\pm}1075.2$ IU, p<0.001). Clinical pregnancy rate per embryo transfer in the rFSH group showed increasing tendency, compared to the uFSH group, but there was no statistical significance (35.2% vs 29.3%). Our results demonstrated that the relative efficiency of rFSH compared with uFSH is higher in older patients. Conclusions: The ovarian stimulatory effect and clinical outcome of recombinant FSH was similar to that of the urinary gonadotropin. The IVF-ET cycles with significantly lower dose of gonadotropin in rFSH group showed comparable results. Therefore, we suggest that recombinant FSH is more potent and effective than urinary gonadotropin.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
v.36
no.6
/
pp.453-459
/
2010
Introduction: Ameloblastic carcinoma is a rare malignant lesion, and may arise from either carcinoma ex-ameloblastoma or de novo carcinoma. Aberrant promoter hypermethylation of the tumor-associated genes leading to their inactivation is a common event in many cancer types. The p16/CDKN2/INK4A gene and p16 5 protein are involved directly in regulating the cell cycles. Cadherins are cell adhesion molecules that modulate the epithelial phenotype and regulate tumor invasion. The aim of this study was to evaluate the roles of p16 and E-cadherin methylation and loss of p16 and E-cadherin expression in the malignant transformation of an ameloblastoma. Materials and Methods: Eight cases of ameloblastoma, including 4 benign ameloblastomas without recurrence, 2 benign ameloblastomas with recurrence and 2 carcinoma ex-ameloblastomas, were examined. The promoter hypermethylation profile of the p16 and E-cadherin genes was studied using methylation-specific polymerase chain reaction (MSP) and immunohistochemical staining for p16 and E-cadherin expression. Results: 1) Aberrant CpG island methylation of the p16 gene was detected in 3 of the 4 benign ameloblastomas without recurrence and 1 of the 2 benign ameloblastomas with recurrence. 2) Aberrant CpG island methylation of the E-cadherin gene was found in 1 of the 4 benign ameloblastomas without recurrence. 3) A loss of p16 expression was noted in 1 of 4 benign ameloblastomas without recurrence and 1 of 2 carcinoma ex-ameloblastomas. 4) A loss of E-cadherin expression was noted in 2 of the 4 benign ameloblastomas without recurrence, 1 of the 2 benign ameloblastomas with recurrence and 2 of the 2 carcinoma ex-ameloblastomas. 5) A loss of p16 expression was observed in 1 of the 4 cases showing aberrant methylation of the p16 gene. 6) A loss of E-cadherin expression was observed in 3 benign ameloblastoma case showing aberrant methylation of the E-cadherin gene. Conclusion: These results suggest that loss of E-cadherin expression related to the other genetic pathway (not methylation) might be an adjuvant indicator predicting the malignant transformation of an ameloblastoma. However, the number of samples in this study was too small and the relationship between the treatment methods and clinical course were not defined. Therefore, further study will be needed.
Journal of the Korean Society of Fisheries and Ocean Technology
/
v.25
no.2
/
pp.87-104
/
1989
Recently, with the tendency of more lightening, high-strength and high-speed in the marine industries such as marine structures, ships and chemical plants, the use of the aluminium Alloy is rapidly enlarge and there occurs much interest in the study of corrosion fatigue crack characteristics. In this paper, the initiation of surface crack and the propagation characteristics on the base metal and weld zone of 5086-H116 Aluminium Alloy Plate which is one of the Al-Mg serious alloy(A5000serious) used most when building the special vessels, were investigated by the plane bending corrosion fatigue under the environments of marine, air and applying cathodic protection. The effects of various specific resistances on the initiation, propagation behavior of corrosion fatigue crack and corrosion fatigue life in the base metal and heat affected zone were examined and its corrosion sensitivity was quantitatively obtained. The effects of corrosion on the crack depth in relation to the uniform surface crack length were also investigated. Also, the structural, mechanical and electro-chemical characteristics of the metal at the weld zone were inspected to verify the reasons of crack propagation behavior in the corrosion fatigue fracture. In addition, the effect of cathodic protection in the fracture surface of weld zone was examined fractographically by Scanning Electron Microscope(S.E.M.). The main results obtained are as follows; (1) The initial corrosion fatigue crack sensitibity under specific resistance of 25Ω.cm% show 2.22 in the base metal and 19.6 in the HEZ, and the sensitivity decreases as specific resistance increases (2) By removing reinforcement of weldment, the initiation and propagation of corrosion crack in the HAZ are delayed, and corrosion fatigue life increases. (3) As specific resistance decreases, the sensitivity difference of corrosion fatigue life in the base metal and HAZ is more susceptible than that of intial corrosion fatigue crack. (4) Experimental constant, m(Paris' rule) in the marine environment is in the range of about 3.69 to 4.26, and as specific resistance increases, thje magnitude of experimental constant, also increases and the effect by corrosion decreases. (5) Comparing surface crack length with crack depth, the crack depth toward the thickness of specimen in air is more deeply propagated than that in corrosion environment. (6) The propagation particulars of corrosion fatigue crack for HAZ under initial stress intensity factor range of $\Delta$k sub(li) =27.2kgf.mm super(-3/2) and stress ratio of R=0 shows the retardative phenomenon of crack propagation by the plastic deformation at crack tip. (7) Number of stress cycles to corrosion fatigue crack initiation of the base metal and the welding heat affected zone are delayed by the cathodic protection under the natural sea water. The cathodic protection effect for corrosion fatigue crack initiation is eminent when the protection potential is -1100 mV(SCE). (8) When the protection potential E=-1100 mV(SCE), the corrosion fatigue crack propagation of welding heat affected zone is more rapid than that of the case without protection, because of the microfissure caused by welding heat cycle.
Kim Hee-Jung;Chung Chae-Heon;Oh Sang-Ho;Choi Han-Cheol
The Journal of Korean Academy of Prosthodontics
/
v.42
no.6
/
pp.628-640
/
2004
Statement of problem. Wear as a result of repeated closing/opening cycles may decrease the friction coefficient of screw head, threads, and other mating components and, consequently, resistance to opening gradually decreases. It may cause screw loosening, which is one of the most common failures in implant prosthesis. Purpose. The purpose of this study is to evaluate the changes on the head and thread surface of the abutment screws after repeated closing and opening through the examination of tested screws in SEM(scanning electron microscope). Materials and methods. Five species of abutments were selected (3i-three, Avana-two) respectively by two pieces. The implant fixtures were perpendicularly mounted in liquid unsaturated polyesther(Epovia, Cray Valley Inc.) with dental surveyor. Each abutment was secured to the implant fixture by each abutment screw with recommended torque value using a digital torque controller. The abutment screws were repeatedly tightened and removed 20 times with a digital controller. FESEM (field emission scanning electron microscope, Netherland, Phillips co., model:XL 30 SFEG) was used to observe changes of each part caused by repeatedly closing/opening expeiment. First, the Photomicrographs of pre-test screws provided by each manufacturer were taken. The changes of each screw were investigated after every fifth closing and opening experiment with FESEM. Scaning electron microscope photomicrographs of each screw were taken four times. Results. As the number of closing and opening was increased, the wear or distortion of hexed or squared slot that contacted with the driver tip was more severely progressed. Wear or distortion of hexed slot was more severe than that of squared slot and it was more remarkable in the titanium screw than in the gold screw. All the tested screws showed that the width in the crest of their screw thread decreased gradually as the test was proceeded. Conclusions. Conclusively, we recommend the clinical use of gold screw, a periodic exchanges of abutment screws and avoiding repeated closing/opening unnecessarily. We also suggest a more careful manipulation of the abutment screw and screw-driver and using of abutment screw with an acute-angled slot design rather than an obtuse-angled one. Finally, it is suggested that the new slot design and the surface treatment for enduring wear or distortion should be devised.
Objective: To determine whether characteristics of sperm motility obtained by computer-assisted sperm analysis (CASA) could predict pregnancy after intrauterine insemination (IUI) in couples with unexplained infertility. Methods: Three hundred eighty-three cycles of intrauterine insemination with superovulation were retrospectively analyzed. Semen analysis was performed with CASA before and after swim-up and the parameters were compared between pregnant and non-pregnant women. Results: The pregnancy rate per cycle was 14.1%. Pregnant and non-pregnant women were comparable in terms of age, infertility duration, the number of dominant follicles. While sperm concentration, motility, and parameters such as average path velocity (VAP) and percentage rapid (RAPID) before semen preparation were significantly different between the pregnancy and non-pregnancy groups, there were no differences in sperm parameters when comparing the two groups after preparation. Using a receiver operating characteristic curve to measure sensitivity and specificity, the optimal threshold value for the predictors of pregnancy was revealed to be a concentration of ${\geq}111{\times}10^6/mL$, a motility of ${\geq}$ 51.4%, and RAPID ${\geq}$ 30.1% before preparation for IUI. Conclusion: Sperm parameters including concentration, motility, and RAPID before sperm preparation could have predictive value for pregnancy outcome after intrauterine insemination with superovulation in couples with unexplained infertility, and would be helpful when counseling patients before they make the decision to proceed with IVF/ICSI-ET.
Purpose : It is very important to endow the cancer patients underwent chemotherapy with satisfactory quality of life (QOL). However, little is known about the factors influencing QOL during chemotherapy. Therefore, we designed this study to find out the factors influencing QOL in the cancer patients who underwent chemotherapy. Methods : Ninety-seven cancer patients were studied, prospectively. The patients' characteristics were as follows; median age(range): 48(19{\sim}83) years, male:female; 57:40, PS:0,1/2,3;55/42 patients, diagnosis(number): lymphoma (28), lung cancer (22), gastrointestinal cancer (18), sarcoma (12), breast cancer (12), gynecological cancer (5), Stage: I,II/III.IV;37/60 patients. We used EORTC QLQ-C30 questionnaires to evaluate QOL. EORTC QLQ-C30 scores were performed before the onset of chemotherapy and after the end of 3 cycles of chemotherapy. The correlation of these scores with performance status (PS), diagnosis, disease stage, response to chemotherapy, and regimen related toxicity was evaluated. Results : The responder group (CR, PR) demonstrated marked improvement of social functional and emotional scales to non-responder group (SD,PD) (P=0.024, 0.045). Non-hematologic regimen related toxicity such as mucositis, nausea and vomiting was significantly correlated with pain scale change (P=0.043). Other factors had no notable correlation with QOL changes. Conclusion : Our preliminary study results may suggest as follows. The response to chemotherapy is associated with the change of social functional and emotional scales and the severity of non-hematologic regimen related toxicity is associated with pain scale change.
Koo, Hwa Seon;Cha, Sun Hwa;Kim, Hye Ok;Song, In Ok;Min, Eung Gi;Yang, Kwang Moon;Park, Chan Woo
Clinical and Experimental Reproductive Medicine
/
v.42
no.4
/
pp.149-155
/
2015
Objective: The goal of this study was to investigate the relationship between serum progesterone (P4) levels on the day of human chorionic gonadotropin (hCG) administration and the pregnancy rate among women undergoing controlled ovarian stimulation for in vitro fertilization (IVF) or intracytoplasmic sperm injection-embryo transfer (ICSI-ET) using a flexible antagonist protocol. Methods: This prospective study included 200 IVF and ICSI-ET cycles in which a flexible antagonist protocol was used. The patients were divided into five distinct groups according to their serum P4 levels at the time of hCG administration (0.80, 0.85, 0.90, 0.95, and 1.00 ng/mL). The clinical pregnancy rate (CPR) was calculated for each P4 interval. Statistically significant differences were observed at a serum P4 level of 0.9 ng/mL. These data suggest that a serum P4 concentration of 0.9 ng/mL may represent the optimal threshold level for defining premature luteinization (PL) based on the presence of a significant negative impact on the CPR. Results: The CPR for each round of ET was significantly lower in the PL group defined using this threshold (25.8% vs. 41.8%; p=0.019), and the number of oocytes retrieved was significantly higher than in the non-PL group ($17.3{\pm}7.2$ vs. $11.0{\pm}7.2$; p=0.001). Elevated serum P4 levels on the day of hCG administration were associated with a reduced CPR, despite the retrieval of many oocytes. Conclusion: Measuring serum P4 values at the time of hCG administration is necessary in order to determine the optimal strategy for embryo transfer.
Ji-In Kim;Hyejin Shin;Yujeong Jeong;Haesong Sher;Gitaek Oh;Yonghoo Park;Sungkyoon Kim
Journal of Environmental Health Sciences
/
v.50
no.2
/
pp.102-112
/
2024
Background: Despite the rise in the number of domestic indoor climbing gyms, there is a lack of specific hygiene standards and research on the holds installed in them. Holds can act as vectors for microbial transmission through the hands, posing a risk of infectious diseases, especially with damaged skin. Objectives: The aim of this study is to investigate the contamination level and species of microorganisms on holds according to the management methods practiced in indoor climbing gyms and identify effective strategies for reducing microbial contamination. Methods: We investigated factors that may influence microbial contamination of holds, including hold management methods, user information, and hygiene management at three climbing gyms in Seoul. A total of 72 holds were sampled, 18 for each management method of brushing, high-pressure washing, and ethanol disinfection. Samples were cultured on LB and blood agar at 37℃ for 48 hours to calculate CFUs. PCR assay targeting 16S rRNA was carried out to identify microorganisms. Dunn-Bonferroni was employed to see the microbial reduction effect of the management method and the difference in microbial contamination by management method and climbing gym. Results: As a result of microbial identification, microorganisms such as Bacillus, Staphylococcus, and Micrococcus, which were derived from various environments such as skin and soil, were discovered on the surface of the climbing hold. Among the discovered microorganisms, some species had potential pathogenic properties that could cause food poisoning, gastrointestinal disease, bacteremia, and sepsis. All hold management methods were effective in reducing microorganisms (p<0.05), with ethanol disinfection being the most effective (p<0.001). Conclusions: Our results indicate that there are potential pathogens on holds that demand thorough management for microbial prevention. Proposed methods include regular brushing and ethanol disinfection in addition to high-pressure washing with long cycles, which are the existing forms of hold management. Further studies on shoe management are advised to curb soil-derived microorganisms.
Objectives: To evaluate the mechanical properties and metallurgical characteristics of the M3 Rotary and M3 Pro Gold files (United Dental). Materials and Methods: One hundred and sixty new M3 Rotary and M3 Pro Gold files (sizes 20/0.04 and 25/0.04) were used. Torque and angle of rotation at failure (n = 20) were measured according to ISO 3630-1. Cyclic fatigue resistance was tested by measuring the number of cycles to failure in an artificial stainless steel canal ($60^{\circ}$ angle of curvature and a 5-mm radius). The metallurgical characteristics were investigated by differential scanning calorimetry. Data were analyzed using analysis of variance and the Student-Newman-Keuls test. Results: Comparing the same size of the 2 different instruments, cyclic fatigue resistance was significantly higher in the M3 Pro Gold files than in the M3 Rotary files (p < 0.001). No significant difference was observed between the files in the maximum torque load, while a significantly higher angular rotation to fracture was observed for M3 Pro Gold (p < 0.05). In the DSC analysis, the M3 Pro Gold files showed one prominent peak on the heating curve and 2 prominent peaks on the cooling curve. In contrast, the M3 Rotary files showed 1 small peak on the heating curve and 1 small peak on the cooling curve. Conclusions: The M3 Pro Gold files showed greater flexibility and angular rotation than the M3 Rotary files, without decrement of their torque resistance. The superior flexibility of M3 Pro Gold files can be attributed to their martensite phase.
Bayoglu, Ibrahim Vedat;Varol, Umut;Yildiz, Ibrahim;Muslu, Ugur;Alacacioglu, Ahmet;Kucukzeybek, Yuksel;Akyol, Murat;Demir, Lutfiye;Dirican, Ahmet;Cokmert, Suna;Yildiz, Yasar;Karabulut, Bulent;Uslu, Ruchan;Tarhan, Mustafa Oktay
Asian Pacific Journal of Cancer Prevention
/
v.15
no.17
/
pp.7119-7123
/
2014
Background: The role of second-line therapy in metastatic pancreatic cancer is not clear. In this study, we aimed to explore the second-line efficiency of capecitabine and oxaliplatin (XELOX) in patients with advanced pancreatic cancer who have received gemcitabine-based first-line therapy. Materials and Methods: We retrospectively evaluated 47 patients with locally advanced or metastatic pancreatic cancer previously treated with gemcitabine-based first-line regimens. Treatment consisted of oxaliplatin $130mg/m^2$ and capecitabine $1000mg/m^2$ twice daily with a 3 week interval, until unacceptable toxicity or disease progression. Results: Median number of cycles was 4 (range, 2-10). The overall disease control rate was 38.3%. The median overall survival and progression-free survival from the start of second-line therapy were 23 weeks (95%CI: 16.6-29.5 weeks) and 12 weeks (95%CI: 9.8-14.4 weeks), respectively. The most common grade 3-4 toxicities were nausea, vomiting and hematologic side effects. Conclusions: Our result suggests that the combination of capecitabine and oxaliplatin was tolerated with manageable toxicity and showed encouraging activity as second-line treatment of advanced or metastatic pancreatic cancer patients with ECOG performance status 0-2.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.