• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.43-48
• /
• 2000

Composite materials have been increasingly used in automotive and aircraft industries, naturally leading to active researches on the materials. The carbon-epoxy composite is selected to study its thermal characteristics. During multiple thermal cycles composed of repeated cooling and heating variations of elastic constants are investigated to understand thermal effects on the carbon-epoxy composite. In this investigation longitudinal resonance method and flexural resonance method was used to characterize. The values of $E_1$ show small amount of increases depending on number of cycles of the thermal fatigue processes whereas values of $G_13$ do not indicate noticeable changes. Also, in cases of $E_2$ and $G_23$ their values decrease to a certain extend in initial stages after applications of thermal fatigue processes. However, the number of cycles of the applied thermal fatigue processes does not seem to affect their values.

• Tribology and Lubricants
• /
• 제15권4호
• /
• pp.328-334
• /
• 1999

Acoustic emission (AE) sensor was used to evaluate the wear-life of CrN-coated steel disks with 1 $\mu\textrm{m}$ and 4 $\mu\textrm{m}$ coating thickness. The relationship between Af and friction signal from scratch test and sliding test was investigated. The first spatting of CrN film was detected by AR signals in the early stage of coating failures, and overall failures by friction signals. Therefore, the conservative design for coating-life should be done using the results of AE signals. Using the percent contact load, the ratio of sliding normal load to the critical scratch load and the number of cycles to failure was measured to predict the wear-life of CrN film. On the wear-life dia-gram the percent contact loads and the number of cycles to failure showed a good linear relationship on the log coordinate. As the load percentage was decreased, the diagram showed that the wear-limits, at which the coated steels survived more than 35,000 cycles, were about 4∼5% of the critical scratch loads.

• 대한수학회지
• /
• 제54권4호
• /
• pp.1149-1161
• /
• 2017

An ($n_1,\;n_2,\;{\ldots},\;n_k$)-colored permutation is a permutation of $n_1+n_2+{\cdots}+n_k$ in which $1,\;2,\;{\ldots},\;n_1$ have color 1, and $n_1+1,\;n_1+2,\;{\ldots},\;n_1+n_2$ have color 2, and so on. We give a bijective proof of Steinhardt's result: the number of colored permutations with no monochromatic cycles is equal to the number of permutations with no fixed points after reordering the first $n_1$ elements, the next $n_2$ element, and so on, in ascending order. We then find the generating function for colored permutations with no monochromatic cycles. As an application we give a new proof of the well known generating function for colored permutations with no fixed colors, also known as multi-derangements.

• Clinical and Experimental Reproductive Medicine
• /
• 제42권4호
• /
• pp.169-174
• /
• 2015

Objective: To assess compliance with Korean guidelines for embryo transfer, the possible reasons for non-compliance, and multiple pregnancies according to each specific condition in compliant cycles. Methods: A single-institution, retrospective study was conducted of 256 fresh in vitro fertilization cycles during 2012-2014. To assess compliance with Korean guidelines, the maximum recommended number of embryos transferred (according to criteria of age, transfer day, and presence of favorable conditions) was compared with the actual number of embryos transferred. Clinical pregnancy rate (PR) was assessed as the percentage of pregnant women resulting from each set of transfer conditions, including the number of embryos transferred. The multiple pregnancy rate (MPR) was calculated as the percentage of pregnant women with a multifetal pregnancy. Results: The compliance rate with the Korean guidelines was 96.5% (247/256). Non-compliance occurred in nine cycles owing to poor embryo quality, repeated implantation failure, or hostile endometrium. In compliant cycles, the PR was 31.2% (77/247), and the MPR was 27.3% (21/77; 20 twins and one triplet). Higher MPR was noted in two types of transfer conditions: transfer of three cleavage embryos in women aged 35-39 years with favorable conditions (66.7%; primarily from those aged 35-37 years) and transfer of two blastocysts in women aged ${\geq}40$ years with favorable conditions (50%). Conclusion: Under the Korean guidelines, compliance rate was high in our center. Multiple pregnancies occurred primarily in group with favorable conditions. In high-risk groups for multiple pregnancies, reducing number of embryos transferred should be considered than suggested in the guideline.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권4호
• /
• pp.2401-2406
• /
• 2013

From January 1, 2008 to March 31, 2010, 101 patients with stage II-III breast cancer were enrolled in this study and subjected to an anthracycline-based neoadjuvant chemotherapy regimen with or without docetaxel. Surgery was performed after 2-6 cycles of chemotherapy, and the clinical response was determined by pathological and histochemical assessments. The clinical response rate, as indicated by complete response (CR), partial response (PR), stable disease (SD), and progressive disease (PD), were 6.9, 52.5, 36.6, and 4.0%, respectively. A multivariable correlation analysis indicated that the overall clinical response rate correlated with the number of metastatic lymph nodes, number of chemotherapy cycles, and vessel invasion status. Importantly, the CR rate was only associated with the number of chemotherapy cycles. Nonparametric tests failed to detect a correlation between HER2 or Topo $II{\alpha}$ status and clinical response to neoadjuvant chemotherapy in these patients. When they were stratified by HER2 or HR status, for HER2-positive patients the CR rate was associated with vessel invasion and Topo $II{\alpha}$ status. Based on our findings, we propose that HR, HER-2 and Topo $II{\alpha}$ are not putative predictive biomarkers of chemotherapy outcome for breast cancer patients. Topo $II{\alpha}$ expression level was only inversely correlated with CR rate among HR-positive patients. Importantly, the achievement of CR was largely related to the number of chemotherapy cycles.

• 한국지반공학회지:지반
• /
• 제11권1호
• /
• pp.113-126
• /
• 1995

점성토의 변형특성을 연구하기 위하여 공진주(RC)시험과 비틀전단(75)시험을 저변형률 및 중간 변형률하에서 실시하여 변형률의 크기,진동주파수,하중반복회수의 영향을 살펴보았다. 소 성지수가 이들의 영향을 평가하는데 중요한 변수임을 알 수 있었다. 실험에 사용된 시료로는 불 교란 실트 및 점토와 실험실에서 다져진 노상토를 사용하였다. 선형한계변형률이하에서 전단탄 성계수는 하중반복회수와 변형률의 크기에 영향을 받지 않았으며, RC시험에서 얻은 최소감소비가 1.1%에서 1.7%영역에서 존재하였다. 점성토의 선형한계변형률은 구속압과 소성지수에 따라 증가하였으며 사질토와 비교하여 넘은 선형영역을 보였다. 반복한계변형률이상의 변형률하에서는 전단탄성계수는 하중반복회수에 따라 감소하였지만 감쇠비는 영향을 받지 않았다. 진동주파수의 영향에 의해 RC시험에서 얻은 점성토의 전단탄성계수와 감쇠비는 RC시험결과보다 컸다. 전단탄성계수는 진동주파수의 대수증가에 따라 선형적으로 증가하였고 감쇠비의 경우 2Hz이하의 저주파수영역에서는 영향을 받지 않았다.

• Clinical and Experimental Reproductive Medicine
• /
• 제47권3호
• /
• pp.221-226
• /
• 2020

Objective: We attempted to identify the optimal cutoff numbers of mature oocytes that would produce at least one or multiple top-quality (grade A) day-3 embryos in normal responders undergoing stimulated in vitro fertilization (IVF) cycles. Methods: We selected 210 fresh IVF cycles performed in 170 infertile women at a single center from January 2014 to November 2019. Four to 14 (total) oocytes were obtained in all cycles after conventional ovarian stimulation. A receiver operating characteristic curve analysis was performed to find the moderate and extreme cutoff numbers of mature oocytes that would produce ≥ 1, ≥ 2, ≥ 3, ≥ 4, and ≥ 5 top-quality embryos. Results: The cutoff number of mature oocytes was significantly correlated with the number of top-quality embryos (r = 0.467, p= 0.000). The moderate cutoff number of mature oocytes was ≥ 3, ≥ 5, ≥ 5, ≥ 6, and ≥ 6 for obtaining ≥ 1, ≥ 2, ≥ 3, ≥ 4, and ≥ 5 top-quality embryos, respectively. The extreme cutoff number of mature oocytes was ≥ 9, ≥ 9, ≥ 10, ≥ 10, and ≥ 11 for obtaining ≥ 1, ≥ 2, ≥ 3, ≥ 4, and ≥ 5 top-quality embryos, respectively. Conclusion: We present the optimal cutoff numbers of mature oocytes that would yield ≥ 1, ≥ 2, ≥ 3, ≥ 4, and ≥ 5 top-quality embryos with 95% specificity. Our findings could help infertility clinicians to set target mature oocyte numbers in women undergoing stimulated IVF cycles.

• 한국안전학회지
• /
• 제9권2호
• /
• pp.18-25
• /
• 1994

In this thesis, the fatigue tests were performed on a series of reinforced concrete to Investigate the variation of strength and the safety of reinforced concrete structures under fatigue load. The specimens were of the same rectangular cross-section, of effective height 24cm and width 30cm and their span was 330cm. The three point loading system is used in the fatigue tests. In these tests, the fracture mode of reinforced concrete structures under fatigue load, relationship between the repeated loading cycles and the mid-span displacement of the specimens were observed. According to the test results, the following fatigue behavior of reinforced concrete specimens were observed. By increasing of the number of repeated loading cycles, the mid-span displacement became greater, however the Incremental amounts of the displacement were reduced. It could be also known that the inelastic strain energy of the doubly reinforced rectangular beams was larger than that of the singly reinforced rectangular beams as increasing the number of repeated loading cycles. Compliance of reinforced concrete structures tended to be reduced as increasing the repeated loading cycles, and the compliance of the doubly reinforced rectangular beams was generally smaller than that of the singly reinforced rectangular beams. Based on the above investigation, it could be concluded that the doubly reinforced rectangular beams under fatigue load were more efficient to resist the brittle fracture than the singly reinforced rectangular beams.

• 동아시아식생활학회지
• /
• 제21권6호
• /
• pp.838-843
• /
• 2011

The objective of this study is to evaluate antioxidant activities of Rehmanniae Radix Preparata (RRP) prepared from dried root through nine repeated steaming-drying cycles. The total phenolic content of the final cycle of RRP increased to 165.2% compared with that of the 1st cycling product. Antioxidant activities which were determined by ferric-reducing antioxidant potential (FRAP), 2,2'-azinobis(3 ethybenzothiazoline-6-sulfonic acid) (ABTS) radical scavenging, 1,1-diphenyl-2-picrydrazyl (DPPH), and hydroxyl radical scavenging activities, increased remarkably as the number of steaming-drying cycles increased. Especially, FRAP value increased to 89.1%. Further, $IC_{50}$ values for DPPH and hydroxyl radical scavenging activities of the final 9th-cycling product decreased to 58.3% and 67%, respectively. Based on these results, it was observed that the antioxidant activities of RRP improve according to an increased number of steaming-drying cycles.

• 한국재료학회지
• /
• 제19권8호
• /
• pp.432-436
• /
• 2009

A Cu-Fe-P copper alloy was processed by accumulative roll-bonding (ARB) for ultra grain refinement and high strengthening. Two 1mm thick copper sheets, 30 mm wide and 300 mm long, were first degreased and wire-brushed for sound bonding. The sheets were then stacked on top of each other and roll-bonded by about 50% reduction rolling without lubrication at ambient temperature. The bonded sheet was then cut into two pieces of the same dimensions and the same procedure was repeated for the sheets up to eight cycles. Microstructural evolution of the copper alloy with the number of the ARB cycles was investigated by optical microscopy (OM), transmission electron microscopy(TEM), and electron back scatter diffraction(EBSD). The grain size decreased gradually with the number of ARB cycles, and was reduced to 290 nm after eight cycles. The boundaries above 60% of ultrafine grains formed exhibited high angle boundaries above 15 degrees. In addition, the average misorientation angle of ultrafine grains was 30 degrees.