• Kyungpook Mathematical Journal
• /
• 제55권3호
• /
• pp.563-586
• /
• 2015

In this research work, a seven-term 3-D novel jerk chaotic system with two quadratic nonlinearities has been proposed. The basic qualitative properties of the novel jerk chaotic system have been described in detail. Next, an adaptive backstepping controller is designed to stabilize the novel jerk chaotic system with two unknown parameters. Moreover, an adaptive backstepping controller is designed to achieve complete chaos synchronization of the identical novel jerk chaotic systems with two unknown parameters. MATLAB simulations have been shown in detail to illustrate all the main results developed for the 3-D novel jerk chaotic system.

• 대한인간공학회지
• /
• 제6권1호
• /
• pp.9-24
• /
• 1987

The design and philosophy are presented for an intelligent aid for a hyman operator who must diagnose a novel fault in a physical system. A novel fault is defined as one that the operator has not experienced in either real system operation or training. When the operator must diagnose a novel fault, deep reasoning about the behavior of the system components is required. To aid the human operator in this situation, four aiding approaches which provide useful information are proposed. The aiding information is generated by a qualitative, component-level model of the physical system. Both the aid and the human are able to reason causally about the system in a cooperative search for a diagnosis. The aiding features were designed to help the hyman's use of his/her mental model in predicting the normal system behavior, integrating the observations into the actual system behavior, or finding discrepancies between the two. The aid can also have direct access to the operator's hypotheses and run a hypothetical system model. The different aiding approaches will be evaluated by a series of experiments.

• 한국통신학회논문지
• /
• 제27권7C호
• /
• pp.712-722
• /
• 2002

광코드분할 다중접속을 위한 새로운 광복호기를 연구했다. 기존의 광부호기와 복호기는 단순하다는 장점은 가지나 복호화 과정에서 발생되는 sidelobe 세기에 의해 접속할 수 있는 사용자 수가 제한된다. 따라서 기존의 연구에서는 sidelobe와 상호상관 신호들의 중첩을 최소화시키는 코드를 만들어 시스템 성능을 개선시키려고 했다. 그러나 지금까지는 획기적인 새로운 방법론이 제시되지 못하고 있는 실정이다. 그러므로 sidelobe나 상호상관 세기를 최소화하거나 소거시킬 수 있는 새로운 광부호기 또는 복호기 연구의 필요성이 요구되고 있다. 본 논문에서는 1$\times$2 또는 1$\times$3커플러와 광 thyristor를 이용한 AND게이트 논리소자(AGLE)를 설계하였고, K(가중치)개의 AGLE로 구성된 새로운 광복호기를 창출하였다. 광 thyristor의 동작원리는 중첩된 광신호만 통과시키고, 중첩되지 않은 펄스들은 소거시킨다. 이러한 개념은 hard-limiter와 같은 동작을 행하는 것이다. 그러므로 이러한 구조를 가진 새로운 광복호기를 시스템에 적용하여 모의실험을 통해 결과를 분석하였다. 사용자 두 명에 대해, 기존의 제시된 결과에서 나타나는 sidelobe와 상호상관 세기가 완전히 소거시킬 수 있음을 보였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.994-996
• /
• 2012

본 연구실에서는 새로운 베큘로바이러스 벡터 시스템을 구축하였다. 즉 본 벡터 시스템은 polyhedron promoter, vesicular stomatitis virus G (VSVG), polyA, cytomegalovirus (CMV) promoter, enhanced green fluorescent protein (EGFP), protein transduction domain (PTD)을 코딩하는 유전자들로 구성 되어있다. 이렇게 새로이 제작된 베큘로바이러스 벡터 시스템과 대조군의 벡터 시스템과 효율과 발현율을 비교하였다. 그 결과 본 연구실에서 제작된 베큘로바이러스 벡터 시스템이 다른 대조군의 벡터 시스템에 비해 효과적임을 확인할 수 있었다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제40권4호
• /
• pp.533-542
• /
• 2017

진단용 X선 영상에서 산란선은 화질을 열화시키는 주요한 원인이다. X선 장치는 필름/스크린을 사용한 아날로그 시스템부터 Imaging plate (IP) 및 평판 검출기(Flat panel detector; FPD)를 사용한 디지털 시스템으로 바뀌어 가고 있다. 그러나 산란 X선 제거를 위한 Grid는 아날로그 시대에 사용됐던 구조부터 큰 변화가 없다. 본 논문에서는 선행연구에서 고안된 산란선 제거율을 향상시키기 위한 간접변환형 평판검출기의 새로운 구조를 다양한 입사 X선을 사용하는 임상현장에서의 활용 가능성을 검토했다. 일반적으로 FPD는 3개의 층으로 구성되어 있다. 신호를 검출하는 화소와 화소 사이에는 전압을 거는 voltage line이나 데이터를 전달하는 data line과 같은 X선 불감영역이 존재한다. 선행연구에서는 이 불감영역에 정확히 맞추어 방사선 불 투과성의 납을 그물 모양으로 substrate layer에 삽입함으로서 검출기 자체가 산란선 제거 효과가 있도록 설계하였다. 새로운 구조의 임상 유용성을 평가하기 위해, 삽입된 그물 모양의 납을 입사 X선에 대해 가로, 세로성분으로 나누어 각각의 성능을 확인하였으며, 동시에 납의 높이를 변화시켜 납 높이가 성능에 미치는 영향을 영상 대조도와 grid 노출 인자를 통해 검토했다. 검출기면에 대해 대각선으로 입사한 X선($0^{\circ}$, $15^{\circ}$, $30^{\circ}$)에 대해서, 입사 X선에 대해 평행한 가로성분이 세로 성분에 비해 높은 영상 대조도와 낮은 그리드 노출 인자를 나타냈으며, 세로성분의 납 높이가 높을수록 본 연구에서 고안한 검출기에 악영향을 미치는 것을 확인했다. 그러므로 본 연구에서 고안한 새로운 FPD 시스템은 FPD의 구조를 방사선검사 조건과 목적에 맞추어 최적화함으로써 임상 의료현장에서의 사용 가능성이 확인되었다.

• 한국대기환경학회지
• /
• 제16권6호
• /
• pp.675-684
• /
• 2000

A novel dry and wet deposition collector, which can overcome the several problems such as water evaporation cartridge cracks and high costs founded in the previous collector systems, has been constructed. ENVI-18 SPE adsorption cartridge has been used to measure atmospheric deposition of polycylic aromatic hydrocarbons (PAHs). A surrogate surface, consisted of water and methanol, was filled in the dry deposition funnel to simulate dry deposition onto water surface. A water supply system in order to compensat evaporation of the surrogate surface was used and it was consisted of a piston pump, a tubing pump, a overflow tube and a chamber system. A novel water vaporizing system to supply water onto the wet SPE cartridge system with a constant flow rate was developed. The novel water vaporizing system, consisted of a vacuum pump, a water supply reserviour and tube and a mini space heater, could prevent the PAHs adsorption cartridge cracks occurred in the previous collector and effectively adsorb PAHs. The novel dry and wet deposition collector showed a good adsorption, desorption, and recovery rates of PAHs. By reducing the number of pumps used and employing polypyopylene (PP) instead of teflon as a material of collection funnel, the total construction costs were much reduced as compared with the previous dry and wet deposition collectors.

• 동력기계공학회지
• /
• 제19권1호
• /
• pp.13-18
• /
• 2015

Over the past years, many research works have been carried out to investigate the factors which govern the performance of diesel engines. The air pollutant emissions from the diesel engines are still significant concerns environmentally in many countries. In the present study, a novel smoke filtration system of diesel engine is proposed. This novel system is composed of filtering elements and vacuum pump driven by exhaust gases emitted from engine cylinders for capturing smoke. In order to verify the excellency of the novel filtration system, the differential pressure across the filtration system is investigated experimentally comparing with other systems which are used commercially in diesel vehicles. As a result it is founded that the differential pressure of the novel system is the smallest among them.

• Carbon letters
• /
• 제25권
• /
• pp.43-49
• /
• 2018

This study suggests the novel thermoplastic toughening agent, which can be applied in the monomer forms without increasing the viscosity of the epoxy resin and polymerized during the resin curing. The diazide (p-BAB) and dialkyne (SPB) compounds are synthesized and mixed with the epoxy resin and the carbon fiber reinforced epoxy composites are prepared using vacuum infusion process (VIP). Then, flexural and drop weight tests are performed to evaluate the improvement in the toughness of the prepared composites to investigate the potential of the novel toughening agent. When 10 phr of p-BAB and SPB is added, the flexural properties are improved, maintaining the modulus as well as the toughness is improved. Even with a small amount of polytriazolesulfone polymerized, due to the filtering effect of the solid SPB by the layered carbon fabrics during the VIP, the toughening and strengthening effect were observed from the novel toughening agent, which could be added in monomer forms, p-BAB and SPB. This suggests that the novel toughening agent has a potential to be used for the composites prepared from viscosity sensitive process, such as resin transfer molding and VIP.

• 대한전기학회논문지
• /
• 제45권4호
• /
• pp.530-534
• /
• 1996

A novel phase error predictor is proposed for servo system in home-use VCRs. The multirate system in VCRs is converted into a single period sampling system with faster sampling time by using the proposed novel phase error predictor. And the disturbances can be measured much faster. From the experimental results, we can see that the perfomance of the control system is improved greatly. The phase lock time of the proposed servo system is ten times faster than that of the conventional system.

• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.405-411
• /
• 2010

This paper proposes a novel tracking algorithm considering radiation to improve the power of a photovoltaic (PV) tracking system. The sensor method used in a conventional PV plant is unable to track the sun's exact position when the intensity of solar radiation is low. It also has the problem of malfunctions in the tracking system due to rapid changes in the climate. The program method generates power loss due to unnecessary operation of the tracking system because it is not adapted to various weather conditions. This tracking system does not increase the power above that of a power of tracking system fixed at a specific position due to these problems. To reduce the power loss, this paper proposes a novel control algorithm for a tracking system and proves the validity of the proposed control algorithm through a comparison with the conventional PV tracking method.