• Archives of Plastic Surgery
• /
• v.40 no.6
• /
• pp.766-772
• /
• 2013

Background Hypospadias is the most common congenital malformation of the male urinary tract, wherein the urethral opening is located proximal to the normal site. Tubularized incised-plate urethroplasty reconstruction, and its efficacy, remains controversial due to the high recurrence rate. This study aimed to evaluate the results of dartos fascia-reinforced flap surgery in hypospadias patients with previous operative complications. Methods Nine patients (mean age, 12 years) who had previous one- or two-stage repair with TIP urethroplasty and suffered from urethrocutaneous fistulas or fissures as complications, underwent dartos fascia-reinforced flap surgery in our clinic between January 2010 and December 2012. The mean postoperative follow-up period was 6 months. Results Among the 9 patients, 7 had complete correction. In all the patients, the maximum uroflow angle was > $45^{\circ}$. No patient complained of an unnatural urinating position. The patients and parents gave very high satisfaction scores (4.7 points) with regard to the appearance of the outer genitalia. Conclusion The dartos fascia-reinforced flap could be a useful and reliable option for complications of hypospadias repair or fissure with the prepuce preserved, given that histological aspects vary and that the possibility of recurrence in the glanular region is high.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.2
• /
• pp.205-211
• /
• 2013

This paper studies on mechanical properties, fractures, and ultrasonic characteristics of Pure Titanium welds using ultrasonic attenuation. Ti specimen was made by using AR purge gas. When the titanium weld specimen is fractured, Tensile tests were conducted in order to observe the ultrasonic signal changes. A scanning electron microscope(SEM) was used to observe changes in failure surface and an ultrasonic normal probe with the central frequency of 4 MHz was used to obtain ultrasonic signals. As a result, the value of the mechanical properties in the weld zone was lower than that in the base zone and heat affected zone(HAZ) from Ti. Also the grain size in the weld zone was bigger than that in the weld zone and HAZ from Ti. Ultrasonic signals using a RMS method presents correlation between envelope area and the tensile strength. Consequently, the ultrasonic method could be potential tool for integrity evaluation of the Ti weld zone.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.42.1-42.1
• /
• 2018

Deep Ecliptic Patrol of the Southern Sky (DEEP-South) observation is being made during the off-season for exoplanet survey, using Korea Microlensing Telescope Network (KMTNet). An optimal combination of its prime focus optics and the 0.3 billion pixel CCD provides a four square degrees field of view with 0.4 arcsec/pixel plate scale which is also best suited for small body studies. Normal operation of KMTNet started in October 2015, and a significant portion of the allocated telescope time for DEEP-South is dedicated to targeted observation, Opposition Census (OC), of near-Earth asteroids for physical and taxonomic characterization. This is effectively achieved through multiband, time series photometry using Johnson-Cousins BVRI filters. Uninterrupted monitoring of the southern sky with KMTNet is optimized for spin characterization of a broad spectrum of asteroids ranging from the near-Earth space to the main-belt, including binaries, asteroids with satellites, slow/fast- and non-principal axis-rotators, and thus is expected to facilitate the debiasing of previously reported lightcurve observations. Our software subsystem consists of an automated observation scheduler, a pipelined data processing system for differential photometry, and an easy-to-use lightcurve analysis toolkit. Lightcurves, spin periods and provisional determination of class of asteroids to which the lightcurve belongs will be presented, using the dataset from first year operation of KMTNet. Our new taxonomic classification scheme for asteroids will also be summarized.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.193-196
• /
• 2008

The vortical structures in a turbulent boundary layer (TBL) developed over a flat plate have been investigated experimentally. The flow conditions tested in this study were Re$_{\theta}$ = 3700, Re$_{\delta}$ = 11${\times}$105 and the shape factor H = 1.3. Instantaneous velocity fields in the streamwise-wall-normal planes were measured by using a dynamic PIV system. A trip-wire and sandpapers were placed behind the leading edge to promote the turbulent transition. 1000 velocity fields were obtained consecutively with a time interval of 1 millisecond. Streamwise u-velocity components were temporally averaged in the measuring plane. In addition, 2000 velocity fields were obtained randomly and ensemble-averaged to get the fully-developed turbulent characteristics. Profiles of the normalized u-component, turbulent intensities and Reynolds shear stress were evaluated. The structures of spanwise vortices were extracted from the instantaneous velocity fields by determining the swirling strength, ${\lambda}_{ci}$. The wall-normalized locations of vortices were temporally averaged in the measuring plane with respect to their rotational direction. The correlations between the temporally averaged u and the temporally averaged $y^+$ of vortices were evaluated. For the case of positive vortices, the correlation is not significant. However, the negative vortices show a strong negative correlation. The y-location of negative vortices tends to increase, as the averaged u decreases and vice versa. These findings indicate that the number of negative vortices in the outer layer increases during the outward bursting events.

• Transactions of the KSME C: Technology and Education
• /
• v.1 no.2
• /
• pp.179-186
• /
• 2013

Far-infrared radiation therapies are becoming more popular for blood circulation disorders, cardiovascular disease, skin diseases, inhibit cancer cell, etc replacing conventional operations. In this research, thermal characteristics of heating part in panel radiators, which is effective on the blood circulation disorders were experimentally analyzed. The heating line supplies heat energy to insulation coatings with heat flux of $150mW/m^2$ in normal status and as a result the coatings reached 20% of the heating line temperature. In other words, the insulation itself could increase surface temperature of heating plates by 20% and raise thermal time constant promote blood circulation effect. We also found that space arrangement of the heating lines was an important factor in designing heating parts and both coefficient of heat conduction and density of the heating plate should be also considered for superimpose of thermal diffusion.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.12
• /
• pp.624-630
• /
• 2001

The trend of the regulations on environmental issues are getting tight. Responding to this trend new technologies such as moving electrodes, wide pitch and pulsed power supply are also introduced in the electrostatic precipitator(EP) systems. The introduction of wide pitch and moving electrodes enhances the system performance of the EPs by improving air-flow and by improving the ash reentrainment on rapping. The power supplies for the EPs developed up to date include thyristor-based dc or intermittent type, SMPS(switching mode power supply) type and the pulsed-power supply type. The use of the pulsed ones is known to improve dust-collecting efficiency of high resistivity ash and reduces back corona occurrence in the collecting plate. There are two kinds of pulsed-power supplies; one with pulsed transformers and the other with direct dc switching devices. The latter uses rotary spark gap switches or semiconductor switches. Both have the merits and demerits: the spark gap switches are simple and robust but has short life time, hence, high maintenance cost, whereas the semiconductor switches have long life time but are costly. In this study, A high voltage power supply with superimposing voltage pulse on dc source was developed for EPs. This study describes circuit topology, operating principle of the scheme, and analysis of experimental results on Dong-Hae Power Plant. The pulsed power supply consists of a variable dc power supply with ratings of 60kV, 800mA and pulse generator which is made of high voltage thyristor-diode switch strings, an LC resonant tank and a blocking inductor. The pulse generator generates variable pulse-voltage up to 70kV using a high frequency resonant inverter with a variable dc source. Two prototypes were built and tested on 250MW DongHae power plant to verify the possibility of the commercial use and the normal operation in the transient states.

• Restorative Dentistry and Endodontics
• /
• v.29 no.4
• /
• pp.370-377
• /
• 2004

The purpose of this study was to regenerate human dental pulp tissues similar to native pulp tissues. Using the mixture of type I collagen solution, primary cells collected from the different tissues (pulp, gingiva, and skin) and NIH 3T3 ($1{\;}{\times}{\;}10^5{\;}cells/ml/well$) were cultured at 12-well plate at $37^{\circ}C$ for 14 days. Standardized photographs were taken with digital camera during 14 days and the diameter of the contracted collagen gel matrix was measured and statistically analyzed with student t-test. As one of the pulp tissue engineering, normal human dental pulp tissue and collagen gel matrix cultured with dental pulp cells for 14 days were fixed and stained with Hematoxyline & Eosin. According to this study, the results were as follows: 1. The contraction of collagen gel matrix cultured with pulp cells for 14 days was significantly higher than other fibroblasts (gingiva, skin) (p < 0.05), 2. The diameter of collagen gel matrix cultured with pulp cells was reduced to 70.4% after 7 days, and 57.1% after 14 days. 3. The collagen gel without any cells did not contract, whereas the collagen gel cultured with gingiva and skin showed mild contraction after 14 days (88.1% and 87.6% respectively). 4. The contraction of the collagen gel cultured with NIH 3T3 cells after 14 days was higher than those cultured with gingival and skin fibroblasts, but it was not statistically significant (72.1%, p > 0.05). 5. The collagen gel matrix cultured with pulp cells for 14 days showed similar shape with native pulp tissue without blood vessels. This approach may provide a means of engineering a variety of other oral tissue as well and these cell behaviors may provide information needed to establish pulp tissue engineering protocols.

• The Journal of Korean Medicine
• /
• v.25 no.3
• /
• pp.160-168
• /
• 2004

Background and Objectives: Tinnitus is on the increase due to the increase in the elderly population, industrial pollution and noise pollution. This symptom is especially marked in patients with a hearing problem and the relationship between cause, mechanism and treatment is poorly understood. The characteristics of tinnitus and other hearing problems are well brought out using an animal model with salicylate ototoxicity. Therapeutic effects of Uncariae Ramulis and Testudinis Plastrum were expected in tinnitus and hearing problems; therefore we experimented on an animal model with salicylate ototoxicity. Salicylate is one of the most commonly prescribed drugs, although it has been recognized that salicylate induces hearing loss and tinnitus reversibly. The purpose of this study was to find the therapeutic effects of this by the morphologic study using salicylate ototoxicity. Materials and Methods : Twelve healthy Sprague-Dawley rats were divided into three groups: normal, control and sample. The sample group was treated with the extract of Uncariae Ramulis and Testudinis Plastrum (1cc/100g, once a day for 6 days). Then, to induce the salicylate ototoxicity in the control and sample groups, rats were injected intraperitoneally with sodium salicylate (500mg/kg). We observed the morphologic changes in the cochlea of the rats every 2, 3, 4 and 5 hours after injection. Results : The outer hair cells showed marked changes. Vacuolization formed in the cuticular plate and the endoplasm of the control group. The endoplasm and the cuticular plates of the sample group after 2 hours were similar to the control group, but the cuticular plates of the sample group observed after 3, 4 and 5 hours were not similar. Conclusions : The results suggest that an extract of Uncariae Ramulis and Testudinis Plastrum has therapeutic effects on an animal model with salicylate ototoxicity.

• International Journal of Highway Engineering
• /
• v.3 no.2 s.8
• /
• pp.103-112
• /
• 2001

This study was performed to evaluate applicability of recycled aggregates as subbase and surface concrete materials for cement concrete pavement. Laboratory compaction test, CBR test and plate load bearing test were conducted to evaluate applicability for pavement subbase materials. Recycled concrete for surface course was manufactured with a design strength of $280kgf/cm^2$. Normal coarse aggregate was substituted with recycled aggregates with five different ratios, 0%, 20%, 40%, 60% and 80% for recycled concrete mixes. Fresh concrete Properties, concrete strength properties for the five substitution percentages of recycled aggregates after 28-day curing and freezing-and-thawing resistance were evaluated experimentally. Based on the experimental results, it was concluded that the recycled aggregate was the material good enough to use for subbase material, and 40% or lower substitution ratio was an appropriate percentage of recycled aggregates replacement for surface concrete.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.3
• /
• pp.297-304
• /
• 2016

A numerical simulation has been performed for the penetration of a long-rod penetrator into a metal block (ceramic-tile-inserted 4340-steel plate). The impact velocity is 1.5km/s at a normal incidence angle. The first two validations are conducted for a semi-infinite block measuring the depth of penetration (DOP). The material model of ceramic is the JH-2 (Johnson-Holmquist) model. The predicted DOP values are in close agreement with the experimental data. Then, the primary simulation is performed by varying the position of the confined ceramic tile for three types of thickness of ceramic tile. The residual velocity, residual mass and residual kinetic energy of the long-rod are obtained from the simulation. Based on these predicted values, the trend of the ballistic performance of the protective structure is estimated. In addition, the mass efficiency is calculated in order to determine the performance of the ceramic-tile-inserted metal block. Finally, the optimum protective structure is identified.