• 콘크리트학회논문집
• /
• 제20권1호
• /
• pp.51-58
• /
• 2008

해석적 방법에 의한 지진 취약성 분석 (fragility analysis)은 입력 거동과 응답 특성의 불확실성을 고려하기 위해 임의화된 확률 변수들 (randomized response variables)로 인하여 해석 과정에 상당한 노력과 시간이 요구된다. 본 연구에서는 구조물의 기본적인 특성인 강성, 강도 및 연성 능력에 따라 지진 취약도 곡선을 바로 도출할 수 있는 새로운 방법을 제안한다. 광범위한 구조물을 대표할 수 있는 일반화된 단자유도계의 동적 해석 결과로부터 로그 정규 취약성 곡선의 도출에 필요한 파라미터를 응답 데이터베이스에 저장한다. 이를 이용함으로써 구조물의 기본적인 특성 (강성, 강도, 연성 능력)만으로 동적해석 과정을 수행하지 않고도 한계상태 취약성 곡선을 도출할 수 있다. 본 논문의 적용 사례를 통해서 제안된 방법이 지진 취약성 곡선을 얻는데 매우 효율적임을 확인 할 수 있다.

• Journal of Biosystems Engineering
• /
• 제27권3호
• /
• pp.219-226
• /
• 2002

Desorption equilibrium moisture contents of oak mushroom were measured by the static method using salt solutions at flour temperature levels of 35$\^{C}$, 45$\^{C}$, 55$\^{C}$ and 6$\^{C}$ and five relative humidity levels in the range from 11.0% to 90.8%. EMC data were fitted to the modified Henderson, Chung-Pfost, modified Halsey and modified Oswin models using nonlinear regression analysis. Drying tests far oak mushroom were conducted in an experimental dryer equipped with air conditioning unit. The drying test were performed in triplicate at flour air temperatures of 35$\^{C}$, 45$\^{C}$, 55$\^{C}$ and 65$\^{C}$ and three relative humidities of 30%, 50% and 70% respectively. Measured moisture ratio data were fitted to the selected four drying models(Lewis, Page, simplified diffusion and Thompson models) using stepwise multiple regression analysis. The results of comparing root mean square errors for EMC models showed that modified Halsey was the best model, and modified Oswin models could be available far oak mushroom. The results of comparing coefficients of determination and root mean square errors of moisture ratio for four drying models showed that Page model were found to fit adequately to all drying test data with a coefficient of determination of 0.9990 and root mean square error of moisture ratio of 0.00739.

• 한국안전학회지
• /
• 제31권2호
• /
• pp.70-75
• /
• 2016

Recently, coastal erosion has been widely in progress and the erosion level becomes also serious in the world wide, espeically in East Sea in Korea. Since it would threaten the life, economics and security risk, it is necessary to much comprehend the reason why coastal erosion has occurred according to the geographical characteristics. Meanwhile, analysis about hydrodynamics of the solitary wave such as tunami in swash zone is needed for the best management practice of coastal erosion. Solitary wave is nonlinear wave and can be reproduced in the laboratoy scale by openning suddenly a sluice gate with water head difference, of which methodology was found in the literature, since it could be simply determined by a significant wave height. Thus, in this sutdy the generation of solitary wave was experimentalized using the sluice gate. Experimental conditions were classified by angles of a beach slope, a water level in a beach slope and a difference of water level between in a headtank and a channel bed. Two kinds of dimensionless analyses based from experimental results in this study were presented; the first analysis indicates nondimensionalization between the wave height and the water level in a beach slope in order to investigate characteristics of solitary wave approaching the beach. The second shows the other nondimensionalization between dynamic pressure and static pressure on a beach slope to investigate the relationship between wave breaking and wave pressure. Under the same conditions as laboratory experiments, the numerical results computed with a SWAN model embedded in FLOW 3D were compared in terms of wave height, and pressure on the beach slope, which shows good agreement with each other. Overall results from this study could provide fundamental hydraulic data for the reliabile verification of numerical simulation results about coastal erosion in swash zone caused by solitary waves.

• 한국강구조학회 논문집
• /
• 제24권3호
• /
• pp.279-287
• /
• 2012

상 하부 스플릿 T 접합부는 T-stub의 두께, 고력볼트 게이지 거리 등의 주요 변수 조합에 따라서 보통모멘트골조 혹은 특수모멘트골조에 적합한 접합부로 사용된다. 상 하부 스플릿 T 접합부가 안전한 구조거동을 발휘하기 위해서는 건축구조기준에서 규정한 층간변위각 및 접합부모멘트에 대한 요구사항을 만족하여야 한다. 이러한 요구사항 조건의 충족여부를 파악하기 위해서는 접합부의 회전강성 및 한계소성모멘트에 대한 예측이 필수적이다. 따라서 이 연구는 일차적으로 정적하중을 받는 상 하부 스플릿 T 접합부의 회전강성 예측을 위한 해석모델 제안을 위하여 진행하고자 한다. 이를 위하여 3차원 비선형 유한요소해석을 수행하였다. 제안한 해석모델의 적용 적합성은 기존의 해석모델 및 실험결과와 비교 검토하여 입증하였다.

• 대한토목학회논문집
• /
• 제8권2호
• /
• pp.13-24
• /
• 1988

본(本) 논문(論文)은 평면(平面)뼈대 구조물(構造物)의 동적(動的) 후좌굴(後座屈) 거동(擧動)을 파악(把握)하기 위하여 기하적(幾何的)인 비선형(非線型) 유한요소법(有限要素法)을 제시(提示)한다. 이를 위하여 3차원(次元) 연속체(連續體)에 대한 가상(假想)일의 원리(原理)에 배루누이-오일러 가정을 도입하므로서, 평면(平面)뼈대에 대한 탄성강도(彈性剛度)매트릭스, 기하적(幾何的)인 강도(剛度)매트릭스 그리고 질량(質量)매트릭스들을 유도한다. circulatory force를 받는 경우에는 circulatory discrete joint load와 circulatory distributed load에 대한 load correction stiffness matrix를 유도하므로써 이러한 하중을 받는 구조물(構造物)의 접선강도(接線剛度)매트릭스는 비대칭 행렬임을 보인다. 유도된 비선형(非線型) 운동방정식(運動方程式)의 해(解)는 Newton-Raphson 방법(方法) 및 Newmark 방법(方法)을 사용(便用)하여 구한다.

• 한국항공우주학회지
• /
• 제37권10호
• /
• pp.984-991
• /
• 2009

본 연구에서는 충격파 및 유동박리효과를 고려하여 항공기 동체-날개 형상(DLR-F4)에 대한 천음속 공탄성 응답해석을 수행하였다. 시간 영역에서 전산유체역학, 유한요소모델 및 전산구조동역학 기법을 활용한 유체-구조 연계시스템을 적용하여 공탄성 해석을 수행 하였으며, 이를 이용하여 비행체의 설계에 정확하고 유용한 결과를 제시할 수 있다. 천음속 영역에서 항공기 동체-날개 형상에 대해 비선형 비정상 공력해석을 수행하기 위하여 6면체 구조 격자를 생성하였고, Navier-Stokes 방정식을 적용하였다. 항공기 동체-날개 형상의 정적 및 동적 공탄성 응답 특성을 파악하였고, 항공기 설계 및 시험 연구자에게 실제적이고 유용한 결과를 제시할 수 있다.

• Computers and Concrete
• /
• 제16권4호
• /
• pp.503-529
• /
• 2015

Traditionally, multi-story buildings are designed to provide stiffer structural support to withstand lateral earthquake loading. Introducing flexible elements at the base of a structure and providing sufficient damping is an alternative way to mitigate seismic hazards. These features can be achieved with a device known as an isolator. This paper covers the design of base isolators for multi-story buildings in medium-risk seismicity regions and evaluates the structural responses of such isolators. The well-known tower building for police personnel built in Dhaka, Bangladesh by the Public Works Department (PWD) has been used as a case study to justify the viability of incorporating base isolators. The objective of this research was to establish a simplified model of the building that can be effectively used for dynamic analysis, to evaluate the structural status, and to suggest an alternative option to handle the lateral seismic load. A finite element model was incorporated to understand the structural responses. Rubber-steel bearing (RSB) isolators such as Lead rubber bearing (LRB) and high damping rubber bearing (HDRB) were used in the model to insert an isolator link element in the structural base. The nonlinearities of rubber-steel bearings were considered in detail. Linear static, linear dynamic, and nonlinear dynamic analyses were performed for both fixed-based (FB) and base isolated (BI) buildings considering the earthquake accelerograms, histories, and response spectra of the geological sites. Both the time-domain and frequency-domain approaches were used for dynamic solutions. The results indicated that for existing multi-story buildings, RSB diminishes the muscular amount of structural response compared to conventional non-isolated structures. The device also allows for higher horizontal displacement and greater structural flexibility. The suggested isolation technique is able to mitigate the structural hazard under even strong earthquake vulnerability.

• Steel and Composite Structures
• /
• 제42권3호
• /
• pp.407-426
• /
• 2022

Superior to traditional welded studs, high strength friction-grip bolted shear connectors facilitate the assembling and demounting of the composite members, which maximizes the potential for efficiency in the construction and retrofitting of new and old structures respectively. Hence, it is necessary to investigate the structural properties of high strength friction-grip bolts used in steel concrete composite beams. By means of push-out tests, an experimental study was conducted on post-installed high strength friction-grip bolts, considering the effects of different bolt size, concrete strength, bolt tensile strength and bolt pretension. The test results showed that bolt shear fracture was the dominant failure mode of all specimens. Based on the load-slip curves, uplifting curves and bolt tensile force curves between the precast concrete slab and steel beam obtained by push-out tests, the anti-slip performance of steel-concrete interface and shear behavior of bolt shank were studied, including the quantitative analysis of anti-slip load, and anti-slip stiffness, frictional coefficient, shear stiffness of bolt shank and ultimate shear capacity. Meanwhile, the interfacial anti-slip stiffness and shear stiffness of bolt shank were defined reasonably. In addition, a total of 56 push-out finite element models verified by the experimental results were also developed, and used to conduct parametric analyses for investigating the shear behavior of high-strength bolted shear connectors in steel-concrete composite beams. Finally, on ground of the test results and finite element simulation analysis, a new design formula for predicting shear capacity was proposed by nonlinear fitting, considering the bolt diameter, concrete strength and bolt tensile strength. Comparison of the calculated value from proposed formula and test results given in the relevant references indicated that the proposed formulas can give a reasonable prediction.

• Structural Engineering and Mechanics
• /
• 제85권5호
• /
• pp.593-605
• /
• 2023

This work presents a comparison between analytical and finite element analysis for bending of porous sandwich functionally graded material (FGM) plates. The plate is rectangular and simply supported under static sinusoidal loading. Material properties of FGM are assumed to vary continuously across the face sheets thickness according to a power-law function in terms of the volume fractions of the constituents while the core is homogeneous. Four types of porosity are considered. A refined higher-order shear with normal deformation theory is used. The number of unknowns in this theory is five, as against six or more in other shear and normal deformation theories. This theory assumes the nonlinear variation of transverse shear stresses and satisfies its nullity in the top and bottom surfaces of the plate without the use of a shear correction factor. The governing equations of equilibrium are derived from the virtual work principle. The Navier approach is used to solve equilibrium equations. The constitutive law of the porous FGM sandwich plate is implemented for a 3D finite element through a subroutine in FORTRAN (UMAT) in Abaqus software. Results show good agreement between the finite element model and the analytical method for some results, but the analytical method keeps giving symmetric results even with the thickness stretching effect and load applied to the top surface of the sandwich.

• 대한토목학회논문집
• /
• 제26권1A호
• /
• pp.237-246
• /
• 2006

손상된 구조부재, 특히 철근콘크리트교량 교각의 내진성능을 정확하게 평가할 수 있도록 하기 위하여 비탄성 시간종속요소를 제안하였다. 비탄성 시간종속요소는 강도 및 강성의 저하된 상태를 유지한 부재상태에 보수 및 보강에 의한 특성치들의 증가분에 대한 효과를 고려할 수 있는 요소이다. 이 시간종속요소는 활성시작시간과 활성끝시간을 갖는 비탄성 요소로서 정적시간이력해석이나 동적시간이력해석의 경우, 사용자가 원하는 시간간격 내에서 자유롭게 활성화를 시킬 수 있는 장점이 있다. 본 연구에서 개발된 시간종속요소를 이용한 해석결과를 보수 및 보강된 철근콘크리트 교각 실험결과와 비교하였고 전반적으로 만족할만한 상관관계를 얻었다. 아울러 연속지진하중하에서 철근콘크리트 교량의 비선형 시간이력의 비교해석을 통하여 개발된 요소의 타당성을 입증하였다. 결론적으로 본 연구에서 개발된 시간종속요소는 보수 및 보강후의 철근콘크리트교량 교각의 내진수행능력 산정에 유용한 자료를 제공하여 구조물의 전반적인 내진안정성 검토에 크게 기여를 할 수 있을 것으로 사료된다.